syringe popped off needle while injecting??

**AnthonyM** · 09-01-2005, 08:14 AM

I was goin in my leg today and when i was injecting the syringe popped off the needle and the juice went everywhere.. I dont think i really got much if any in..but, what should I do.. Inject another cc? and why did this happen.. Im having a real problem with these needles, it is very hard to push down. they're 3ml25g1 sustanol 250 organon

**AnthonyM** · 09-01-2005, 08:16 AM

shit ya know what, i tightened it. Not enough i guess.

**speak** · 09-01-2005, 08:21 AM

buy the locking syringes. I just went through a 100 of the push ons and it sucked the whole time.

**tboney** · 09-01-2005, 08:25 AM

Sust is very thick try a lower gauge and like "speak" says get the locking syringes.

**JdFlex** · 09-01-2005, 08:25 AM

If you buy your syringes with needles attached, you have to be sure to tighten them before using. Sometimes they are not on that tightly. Also, the reason it is difficult to push the plunger is b/c you're using a 25g needle. That's a small diameter to push that thick oil through. Try running the syringe under hot water before injecting. That will help to thin out the oil a bit. And you're just gonna have to push slowly and be patient. I use 25g too, they work fine as long as you're patient.

**jucinator** · 09-01-2005, 08:31 AM

I use 22 gauge and they dont hurt and you can pump crude oil through them , i dont have an hour to put 1 cc into my body ,we do 3 cc at a time no problem ,quads glutes delts, thats the rotation, buy bigger pins and tighten the tips before injecting.

**JdFlex** · 09-01-2005, 08:47 AM

Originally Posted by jucinator

I use 22 gauge and they dont hurt and you can pump crude oil through them , i dont have an hour to put 1 cc into my body ,we do 3 cc at a time no problem ,quads glutes delts, thats the rotation, buy bigger pins and tighten the tips before injecting.

I used to use 22s, but after a while you start to build up a lot of scar tissue. That's why I switched to 25s, smaller holes. Just something else to consider.

**ant_8u** · 09-01-2005, 09:10 AM

I stuck a 21g in my ass a couple of days ago

It didn't tickle i'll tell ya that

**Xtralarg** · 09-01-2005, 09:15 AM

Try warming the juice up,goes thinner and easier to inject.Not to warm tho!!

**AnthonyM** · 09-03-2005, 01:44 AM

What's the best way to heat up the gear

**WelshWarrior** · 09-03-2005, 01:55 AM

Run it under a hot tap for a minute or so. Just make sure the water is only coming into contact with the barrel, though and not the syringe.

**BluePitt** · 09-03-2005, 02:20 AM

Heat It Up Military Style.. Hold It Tightly In Your Hand For A Min Or So..
That Is What I Do Works Good For Me..

**bigJJ** · 09-03-2005, 02:33 AM

I stick in the morning, right after a shower. So right before I get in the shower, I fill a coffee mug with hot water (hot out of the tap, don't get crazy) and stand the vial up in it. By the time I get out of the shower and ready to shoot, the oil has lost a good deal of the viscocity. Goes in nice 'n smooth...

**tclark828** · 09-03-2005, 07:01 AM

in the winter i heat mine up on the ehater...i have electric baseboard heat...works well

**doghunter** · 09-03-2005, 07:53 AM

25 are a waste and ur pushing to hard on them 22 is the ideal g for oil

**GetHugeDieTrying** · 09-03-2005, 09:27 AM

im using 21g for test enanthate , i can suck that ****er outta the amp and sticker in, aspirate and be done in about 1-2 minutes flat... im quick and on the the gym thats the way i like it. IMO i dont have the time to sit and watch tv with my dart in my thigh pushin for 20 minutes.

-GHDT