Gear thickness

Ok, I have 100mg npp that is the thinnest gear I have ever drawn. I have always found clear oils to be thinner but this stuff is just short of ridiculously thin.

It has been many years since I purchased anything less than 200mg ml, but I would certainly think the dosage per ml wouldnt affect fluidity much if any.

Gear is from a "trusted supplier" but I can draw 3ml into a syringe with a 25 ga. 11/2 pin in about 30 seconds.

Not familiar with fast acting esters like phenylpropionate
and am slightly concerned with how thin this is. I realize different carrier oils have different fluidity and color but I have never seen any carrier so thin.
All the deca, test, and tren I have ordered in the past had different color but were always drew about the same.

Anyone have any input on this?

I have sp prop and its some of the thinnest oil I had also. color is clear which kinda threw me off

Quote:

---

Originally Posted by Heavyhitter5

I have sp prop and its some of the thinnest oil I had also. color is clear which kinda threw me off

---

I have had some spectacular gear that was clear and much of it came from this guy. It is stealth sachets but good lord its thin. I usually preload syringes because it takes so long to draw but I just drew 30 ml of this up and shot it into sterile vials in 10 min.

did you ever try the balken dbols 10mg? sorry to hijak your post

Yes, a couple of times. They are what you would expect. Very consistent. Good results at 30mg per day. Even better at 50mg per day.

I ran cheaper dbol at 100mg per day and the results were about the same as bp at 50

ok thanks bro

Quote:

---

Originally Posted by Heavyhitter5

ok thanks bro

---

No prob. I have used enough bp I consider them pharma grade. They are in other countries.

I think that it is just your lack of using short esthers in a long time. They are much quicker to fill the syringe. I have never used NPP, but I can load a slin syringe with test prop pretty quickly. Tren ace and mast take longer so I remove the plunger and back fill. Im an impatient mofo. You should be good if it is from a trusted source.

Quote:

---

Originally Posted by charger69

I think that it is just your lack of using short esthers in a long time. They are much quicker to fill the syringe. I have never used NPP, but I can load a slin syringe with test prop pretty quickly. Tren ace and mast take longer so I remove the plunger and back fill. Im an impatient mofo. You should be good if it is from a trusted source.

---

Thanks for that. Its been a decade since I used short esters. Just what I was hoping to hear.

Quote:

---

Originally Posted by Obspowerstroke

Thanks for that. Its been a decade since I used short esters. Just what I was hoping to hear.

---

Esters shouldn't have a noticeable effect on the thickness of the oil. The solvents and carriers will determine that, IMHO.
A compound in castor oil draws much slower than a compound in cottonseed oil. I feel that grapeseed oil draws faster than cottonseed oil.

Edit: I have done a reasonable amount of home brewing in my past and never noticed a difference between drawing test prop vs, test cyp or tren ace vs. tren enanthate.
If ester determined the thickness of a compound, bases (without an ester) would fly like sh!t through a goose, and we all know bases don't draw any faster, right?

My recent package also had thin oil.. I put a drop on my finger it looked so thin lol.. Long time trusted supplier though, and no issues. But damn. I'm going to try and find out the carrier oil on it, maybe start using it on my own brew. Stuff is so clear and thin, makes my stuff look like dollar store brand

Quote:

---

Originally Posted by xTyson

My recent package also had thin oil.. I put a drop on my finger it looked so thin lol.. Long time trusted supplier though, and no issues. But damn. I'm going to try and find out the carrier oil on it, maybe start using it on my own brew. Stuff is so clear and thin, makes my stuff look like dollar store brand

---

Probably peach kernel oil if the supplier is who I think it is.

I use 18ga needles to draw, nothing takes more than a second or two

Since I mix everything in the same syringe, there is definetly a difference in thickness. I always take the thicker ones first so that I can get the air in the vial to assist. If you really want to magnify it, try a slin pin.

AAS oils can vary due to the carrier oils. Sesame,cottonseed,GSO,MCT are commonly used and can all have a different thickness.

Used MCT oil for my homebrew and it is very, very thin. Genesis cypionate which I used for most of my previous cycle is also done with MCT oil. Genesis gave me bad PIP but not for my friend. My homebrew test E with 2% BA 10% BB is giving me PIP too lol. Next time its grapeseed or cottonseed oil with less BA and BB.

Quote:

---

Originally Posted by ALIN

AAS oils can vary due to the carrier oils. Sesame,cottonseed,GSO,MCT are commonly used and can all have a different thickness.

---

I said that already.