who inspects their gear?

[gixxerboy1]

I dont know ,maybe because i been using a long time. Even when i get new stuff i just grab a pin load it and inject.

i see so many newbs Talking about this batch is thinner then my last. Or it smells or taste different. I dont think i ever smelt my gear. And the only time i ever tasted it was un accident when doing a delt injection and the barrel separated from the pin and it shot every place.

[warchild]

i get mine from walgreens. never inspect when new only when opened for awhile ill notice some crystal in it

[ghettoboyd]

i do hold all injectables to a light to see if its crashed,cloudy,contaminats that sort of thing but i always just assume its good other than that..ive been lucky over the years as ive never been burned on a deal...well maybee just one but i did get product but the source went scammer and after talking to peeps whom dealt with the same source i came to the conclusion of just taking it as a loss and trashing it...

[Honkey_Kong]

The most I do is look at it to see if there is shit floating in the oil. Because in all seriousness, until we shoot it, we don't know if it's good or bad. Most of those kids on here who talk about inspecting their gear, probably either never have touched the shit or it's maybe their first cycle and they're nervously paranoid.

I've never bought bunk shit yet.

[gixxerboy1]

The most I do is look at it to see if there is shit floating in the oil. Because in all seriousness, until we shoot it, we don't know if it's good or bad. Most of those kids on here who talk about inspecting their gear, probably either never have touched the shit or it's maybe their first cycle and they're nervously paranoid.

I've never bought bunk shit yet.

Want some

[spywizard]

actually i refilter everthing.. weird i now..

[gixxerboy1]

actually i refilter everthing.. weird i now..

Have you had an issue in the past that causes you to do that?

[DanB]

I just pin it same as yourself, I usually use the same lab and when its not that lab its pharm gear, to be honest I couldnt care less how thick or thin it is once it does the job and I trust the ugl as much as you possibly can trust a ugl that it is sterile etc so I couldnt care if they use slightly more EO in this or that batch etc

But I do have a mate who tried to use 10ml as cooking oil, the food didnt taste very nice lol, yes this is some of the fvcked up shit that dan gets up to when he partys

[DanB]

and seriously wtf is going on today? first dukkit is all over q&a and now leatherdaddy has gixxer worried about the taste of his gear, is it a full moon or something?

[ironbeck]

I just look real quick for particles and such.....at some point I may get some on my hands and give it a wiff, seems to have a distinctive odor...of...power..mmmuuuuhhhaa

[Bonaparte]

I brew all my own, so I inspect it originally for quality control.

If I bought UGL gear, you can bet I would refilter and autoclave everything.

[Honkey_Kong]

Want some

Uhhhh, no that's alright.

[Honkey_Kong]

I just pin it same as yourself, I usually use the same lab and when its not that lab its pharm gear, to be honest I couldnt care less how thick or thin it is once it does the job and I trust the ugl as much as you possibly can trust a ugl that it is sterile etc so I couldnt care if they use slightly more EO in this or that batch etc

But I do have a mate who tried to use 10ml as cooking oil, the food didnt taste very nice lol, yes this is some of the fvcked up shit that dan gets up to when he partys

WTF? You guys used gear as cooking oil?

[lovbyts]

WTF? You guys used gear as cooking oil?

Sounds like something a Jersey boy would do to look cool.

[gixxerboy1]

WTF? You guys used gear as cooking oil?

what you never made fried chicken with prop? Mmmm mmm good

[HitIt]

i look at mine...does that count?

[Vettester]

what you never made fried chicken with prop? Mmmm mmm good

Reminds of a guy on here a year or so ago that was injecting cyp into his chicken, and figured he was getting a double hit of protein and steroids in one setting at the dinner table ... What a cluck!

[gixxerboy1]

Reminds of a guy on here a year or so ago that was injecting cyp into his chicken, and figured he was getting a double hit of protein and steroids in one setting at the dinner table ... What a cluck!

oh gawd, i missed that one

[Misery13]

I brew all my own gear so I check and re-check. I filter it at least twice.

[jasc]

Reminds of a guy on here a year or so ago that was injecting cyp into his chicken, and figured he was getting a double hit of protein and steroids in one setting at the dinner table ... What a cluck!

hahahaha that's a damn good idea..

Anyone ever try Prop infused Olive oil? Would give an extra kick to my tuna/romaine salad.

[Honkey_Kong]

Sounds like something a Jersey boy would do to look cool.

I'm surprised that's not an episode of the Jersey Shore

what you never made fried chicken with prop? Mmmm mmm good

So that must be one of the Colonel's secret herbs and spices.

[Shol'va]

I'm surprised that's not an episode of the Jersey Shore



So that must be one of the Colonel's secret herbs and spices.

Yep and that's why it's called finger licken chicken!

[wmaousley]

I use HG gear bought from a pharmacy, so no need to inspect. Even before when I used UGL gear, I never inspected it. I just shot it as I knew where it was coming from.

[< <Samson> >]

I have never had any injections except one tetanus shot.

It just seems scurry, what if it's dirty shit? Won't that fvck you up?

My "dude" says he guarantees his shit and has it tested per batch. I can't say it's true, but it's about 20% more expensive than anyone else and never heard anything bad about him.

[DanB]

I'm surprised that's not an episode of the Jersey Shore

So that must be one of the Colonel's secret herbs and spices.

It prob on talafornia, the Irish version of it lol

[tcw]

Interesting...i've never brewed but looked up Autoclave..and it appears to be a machine that you drop your instrument in and it steams it at 120 plus degrees.

So you would drop the vial in the autoclave and that would kill all bacteria associated with the vial (on the exterior ONLY).

I brew all my own, so I inspect it originally for quality control.

If I bought UGL gear, you can bet I would refilter and autoclave everything.

[spywizard]

Have you had an issue in the past that causes you to do that?

yes and no.. i had a blend once that was painful, some red and swelling, diluted with grapeseed oil and refiltered and it was like butter.. maybe too much ba.. but still every since i re filter it into sterile presealed vials..

[spywizard]

I have never had any injections except one tetanus shot.

It just seems scurry, what if it's dirty shit? Won't that fvck you up?

My "dude" says he guarantees his shit and has it tested per batch. I can't say it's true, but it's about 20% more expensive than anyone else and never heard anything bad about him.

guarantee??? you mean he promises that the felony substance that you just bought from him is real and wont give you an infection??

does he double your money?? pay your legal fees, or what??

give you your arm back??

it's all a crap shoot..

[AnabolicBoy1981]

i do and filter it..i dont care how reputable the source is. Fakes are made so good now. And even the legit stuff might be full potency, who knows what some foreign greecball did in the factory. Alot of "reputable" labs have shady pasts, or something was wrong and they had to start back up again with a diff name. Not exactly people with integrity running these things even in countries where it's legal. So even if they aren't cutting corners in product potency, maybe they are in sterility. I never shot anything i didnt filter. I've seen enough NASTY pics of abscesses to make me filter gear. I mean if the whole reason we do this is to look/perform better....how is a gaping abcess hole that needs 6 weeks to heal and that will leave a scare help us?
Recently i got 5 vials of primo and one was leaking and the vial cap was loose. Maybe it got banged around or temp changes made it pop....but maybe the ****er didnt put the cap good. Maybe all that companies caps are a little loose...just enough to let some abscess causing bacteria in. You better believe i filtered that stuff and im not using that companies stuff again. If primo was cheaper i probably would have even just chucked the one that leaked. Finished all that "leaked" gear with no problems but still.
I'd personally go look at some abscess pics online and get some perspective. Just imagin if they had to cut your quad, shoulder, or buttcheek open....real sexy. Just sayin..

[Bonaparte]

Interesting...i've never brewed but looked up Autoclave..and it appears to be a machine that you drop your instrument in and it steams it at 120 plus degrees.

So you would drop the vial in the autoclave and that would kill all bacteria associated with the vial (on the exterior ONLY).

It's just a pressure canner. And it heats the oil in the vials to a safe 250 F (with 15psi).

[AnabolicBoy1981]

mmmm...

http://images.search.yahoo.com/image...mb=cZq49/bGe9n

[AnabolicBoy1981]

oh yeah...

http://images.search.yahoo.com/image...mb=cZq49/bGe9n

[AnabolicBoy1981]

darn that seconf one didnt work but if you yahoo shoulder abscess on "images" theres a nasty shoulder on the second row down

[FONZY007]

Interesting...i've never brewed but looked up Autoclave..and it appears to be a machine that you drop your instrument in and it steams it at 120 plus degrees.

So you would drop the vial in the autoclave and that would kill all bacteria associated with the vial (on the exterior ONLY).

No makes the liquid sterile also, I use one at work

[Honkey_Kong]

darn that seconf one didnt work but if you yahoo shoulder abscess on "images" theres a nasty shoulder on the second row down

Hey, Bro, you haven't been updating your thread lately..