Is it ok to jab full 1ml into triceps/delts

I have been spot injecting 1ml of Tren mixed with 1ml of Test prop into my left Tricep.
Then doing 1ml of Equipoise into my right Tricep
Then next day I switch it round to my Delts.

What I have noticed sometimes, not everytime though, is that injecting the 1ml tren mixed with 1ml test prop into my tricep or delt, sometimes when Ive injected then pulled the needle out, some of the fluid comes out of where i have jabbed! just a little bit.
It does not happen everytime but sometimes
So i was told to inject the tren I have to mix it with the test prop, dilute it so it does not hurt as much.
But am I trying to inject to much into one place?
Is it better to do half a mil in one area then the other half in the other area? so u dont get any liquid coming out
Or maybe this is common I dont know?
remarks please

this is just for me and not the same for everyone.

1ml in tri's
2ml in front head delt's
3ml in side head delts

1ml is always ok for me. Sometimes a little oil comes back out you cant really help it.

As mentioned above, alot depends on your particular physique. In general, smaller muscle groups should be injected with lesser volumes than larger muscle groups.
For me, 2.5-3cc is my absolute max for tris. 1.5cc is plenty for my biceps.
2-3cc anywhere on my delts is good, but my pecs will only tolerate 2cc.
Forearms and calves are good for only 1cc.
Quads will hold about anything I put in them, on the other hand, I never inject glutes.

AG

Quote:

---

Originally Posted by stocky121

this is just for me and not the same for everyone.

1ml in tri's
2ml in front head delt's
3ml in side head delts

---

Dude! are you saying u inject 3ml in one go into ur side head delts!?

3ml of what?
and if so, why do you do 3ml all in one go on one day :scratch:

Quote:

---

Originally Posted by BigHuman

Dude! are you saying u inject 3ml in one go into ur side head delts!?

3ml of what?
and if so, why do you do 3ml all in one go on one day :scratch:

---

If you're running short esters, this is fairly common.

AG

Quote:

---

Originally Posted by almostgone

If you're running short esters, this is fairly common.

AG

---

Really! Well I must be doing it all wrong

I take test prop mixed with tren, but I got told only inject once a day in the morning,
1ml Test prop mixed with 1ml tren everday.

Are you saying people inject more like 3ml of something like test prop in one day?
I thought 1ml prop every day was enough test to take a week

No, your cycle is fine, perhaps I didn't elaborate sufficiently.
Imagine you are running test prop, tren ace, and masteron prop. That totals 3ml ED.
Also, if you're kicking off a long ester with some short esters, you may have a run such as 1ml of test prop, 1ml of test enan or test cyp, and let's say tren enan. That would give you 3ml for an injection.

Of course, if your body responds to less compounds than this, then there would be no need to run these dosages.

Also, if you're losing much oil post-injection, look into the Z-track method.

AG

prop should be ran everyday @ 1ml+

my bud ran 1.4ml everyday and he went from 210 16% to 206 9%.

Quote:

---

Originally Posted by almostgone

No, your cycle is fine, perhaps I didn't elaborate sufficiently.
Imagine you are running test prop, tren ace, and masteron prop. That totals 3ml ED.
Also, if you're kicking off a long ester with some short esters, you may have a run such as 1ml of test prop, 1ml of test enan or test cyp, and let's say tren enan. That would give you 3ml for an injection.

Of course, if your body responds to less compounds than this, then there would be no need to run these dosages.

Also, if you're losing much oil post-injection, look into the Z-track method.

AG

---

I was looking into adding test enth into my cycle.
How often does it need to be injected
At the moment im doing 1ml prop mixed 1ml tren everyday and 1ml equipoise 800mg a week with 50mg d-bol a day.
Wanted to add more test, some people just said increase your prop dosage , others advised to add test enth into cycle.
What you think would be best

Quote:

---

Originally Posted by BigHuman

Dude! are you saying u inject 3ml in one go into ur side head delts!?

3ml of what?
and if so, why do you do 3ml all in one go on one day :scratch:

---

i was injecting 1ml of sust 1ml of deca and 1ml of eq EOD so thought why not do it all in 1 jab. Only thing i found with that is i hate the 5ml barrals what a nightmere to push in just sticking with 2ml barrals from now on.

This varies between indivduals but i use 3ml side delts and 2ml side tri with no problems, id work of low and build up slowly

Quote:

---

Originally Posted by stocky121

i was injecting 1ml of sust 1ml of deca and 1ml of eq EOD so thought why not do it all in 1 jab. Only thing i found with that is i hate the 5ml barrals what a nightmere to push in just sticking with 2ml barrals from now on.

---

If i get 1ml of prop and 1ml of tren in same barral then jab it, thats 2ml in barrel, ive got 2 ml barrel so the barral is pretty full of juice
When I jab all this though, after i pull needle out a little bit of fluid comes out the hole
So make me think im trying to put 2 much juice in one place.

Quote:

---

Originally Posted by almostgone

As mentioned above, alot depends on your particular physique. In general, smaller muscle groups should be injected with lesser volumes than larger muscle groups.
For me, 2.5-3cc is my absolute max for tris. 1.5cc is plenty for my biceps.
2-3cc anywhere on my delts is good, but my pecs will only tolerate 2cc.
Forearms and calves are good for only 1cc.
Quads will hold about anything I put in them, on the other hand, I never inject glutes.

AG

---

Forearms AG?

You KNOW imma hit you with a PM RIGHT NOW lol



As AG said.. it depends on the individual physiology.

I can tolerate 2 ml in each of my delt heads comfortably (well the front with a little discomfort.. the rear can hold 2.5 cc no prob... side's starting to get some scar tissue so i don't touch there as much.. but 2ccs is doable)

Bis/Tris... ouch .. 1 cc max

Quads: 1 cc pain free... 1.5 cc pain... Maybe 2 ccs max. I'm not trying it tho.

Calves/traps/forearms... never done 'em.

Pecs.. have done 1-2 ccs.. 2ccs was hell. Pressing was impossible. 1 cc is 'ok'... so i wouldn't go higher than that personally.

Glute medius (vetrogluteal)... 3 ml.. no prob.. could go higher

Glute max.. 3 ml no prob.. cept soreness.

Quote:

---

Originally Posted by stocky121

i was injecting 1ml of sust 1ml of deca and 1ml of eq EOD so thought why not do it all in 1 jab. Only thing i found with that is i hate the 5ml barrals what a nightmere to push in just sticking with 2ml barrals from now on.

---

I shoot 3ml of fluid in a 3ml syringe.

Even when it's full to the mark (or even .2 over) there's .25-.5 ccs of potential airspace left for comfortable aspiration.

Remember, it's only a little air bubble we're looking for so a little flick is all we need.... so pulling out the plunger and losing the gear is no concern.

5ml syringes are like forearm work lol.

Quote:

---

Originally Posted by Narkissos

I shoot 3ml of fluid in a 3ml syringe.

Even when it's full to the mark (or even .2 over) there's .25-.5 ccs of potential airspace left for comfortable aspiration.

Remember, it's only a little air bubble we're looking for so a little flick is all we need.... so pulling out the plunger and losing the gear is no concern.

5ml syringes are like forearm work lol.

---

the thing is mate i get mine from my local needle exchange thay only do 2ml or 5ml barrals i also asked for 10ml barrals for my homebrew but the bastards told me to **** off lol

pwned!

:lol:

Quote:

---

Originally Posted by Narkissos

Forearms AG?

You KNOW imma hit you with a PM RIGHT NOW lol

---

Talk to me, Nark. :) LOL, seriously my forearms tolerate injections fairly well. I usually hit the largest flexor muscle and just feel my way in.
As far as glutes, I'd have to sit on a needle to inject anything. I'm too wide up top or not limber enough to inject my own butt. Also, if I can see where I'm injecting, I can treat it if something goes wrong.

AG