Results 1 to 17 of 17
  1. #1
    akaz13 is offline Associate Member
    Join Date
    Oct 2007
    Posts
    245

    What guage pin to draw out of vial?

    I have some 22 guage pins to draw out of amps (and then switch to smaller pins to inject with)...

    Up until now, I only used amps, but just some 10ml vials... Are the 22g pins to big to draw with?

    What I mean is the size of the hole the 22g pin will leave in the rubber top causing leakage... Nothing to worry about, or use a smaller pin to draw with?

  2. #2
    dh-dude is offline New Member
    Join Date
    Apr 2008
    Location
    Canada
    Posts
    42
    ...with oil based stuff, I generally use a 20 guage to draw from the vial. For myself, I would think a 22 would be a little on the small side.

  3. #3
    Charger527's Avatar
    Charger527 is offline Senior Member
    Join Date
    Feb 2008
    Location
    Australia
    Posts
    1,259
    i use a 19 or 18 mate, the rubber is made to take drawing sized needles. it wont leak.
    unless its vet grade and they have a different rubber on it, in which case id only put one 19 in and draw up the whole cycle in one go.

  4. #4
    Kale is offline ~ Vet~ I like Thai Girls
    Join Date
    Apr 2005
    Location
    Asia
    Posts
    12,286
    Quote Originally Posted by Charger527 View Post
    i use a 19 or 18 mate, the rubber is made to take drawing sized needles. it wont leak.
    unless its vet grade and they have a different rubber on it, in which case id only put one 19 in and draw up the whole cycle in one go.
    Me too 18 or 19g is the way to go

  5. #5
    testa dura is offline Banned
    Join Date
    May 2008
    Posts
    193
    im using 21g on test e ,,,,no probs

  6. #6
    GT2's Avatar
    GT2
    GT2 is offline Senior Member
    Join Date
    May 2008
    Location
    Lift weights, eat steaks
    Posts
    1,779
    Quote Originally Posted by Kale View Post
    Me too 18 or 19g is the way to go
    Agreed.

  7. #7
    akaz13 is offline Associate Member
    Join Date
    Oct 2007
    Posts
    245
    Quote Originally Posted by Charger527 View Post
    i use a 19 or 18 mate, the rubber is made to take drawing sized needles. it wont leak.
    unless its vet grade and they have a different rubber on it, in which case id only put one 19 in and draw up the whole cycle in one go.
    And store it all in a syringe(s)?

    How would you go about that? I know you would just draw it all at once, like w/ satchets... but what about injecting?

    Do you just use a new pin and shoot how ever many mg you plan to use, stop, and repeat when it is time for the next injection?

  8. #8
    inky-e's Avatar
    inky-e is offline AR's ORIGINAL ANABOLIC OUTLAW~ [RIP-8/20/11]
    Join Date
    Dec 2007
    Location
    the three oh!
    Posts
    13,329
    18 g to draw and 18g to shoot!! hahaha No way! I shoot with 23g.

  9. #9
    SpiderRico's Avatar
    SpiderRico is offline Member
    Join Date
    Jun 2005
    Location
    Dirty Jerz
    Posts
    954
    to draw i choose either 18 or 20 to shoot 23 or 25

  10. #10
    Flex-Appeal's Avatar
    Flex-Appeal is offline Senior Member
    Join Date
    Jul 2008
    Location
    Baton Rouge
    Posts
    1,693
    I draw with 21g only bc that's what I have. You can draw with bigger pin but the juice flows in fine with 21g.

  11. #11
    Mulciber is offline Scammer
    Join Date
    Sep 2008
    Location
    The Center Ring
    Posts
    2,392
    i use 20g..

  12. #12
    smokeyd's Avatar
    smokeyd is offline Grade A Whore/Banned
    Join Date
    Mar 2007
    Location
    EATIN BEEFS
    Posts
    10,417
    i used 18 last time with mex shit and it started messing up the stoppers pretty bad towards the end, prop so eod, i would advise 20 with mex

  13. #13
    Kratos's Avatar
    Kratos is offline I feel accomplished
    Join Date
    Jun 2007
    Location
    CT
    Posts
    34,255
    I use a 22 gauge to draw and 25 to shoot
    I use 100ml vials and the stopper gets too beat up if I use anything bigger, already swiss cheese by the time I get to the bottom of the barrel.
    22 flows fast enough, 18 gauge takes a core sample of the stopper and I get little gray floaters in there.

  14. #14
    jstraw428's Avatar
    jstraw428 is offline Anabolic Member
    Join Date
    May 2005
    Posts
    2,804
    Im with Kratos....I use 22g to draw, which is plenty, considering the gear i am using can be injected with a 29g pin.....

  15. #15
    SpiderRico's Avatar
    SpiderRico is offline Member
    Join Date
    Jun 2005
    Location
    Dirty Jerz
    Posts
    954
    Quote Originally Posted by Kratos View Post
    I use a 22 gauge to draw and 25 to shoot
    I use 100ml vials and the stopper gets too beat up if I use anything bigger, already swiss cheese by the time I get to the bottom of the barrel.
    22 flows fast enough, 18 gauge takes a core sample of the stopper and I get little gray floaters in there.
    I can totally understand if you have 100ml vials but not everyone has that big of vials so i usually have no problem with 18 or 20s.... but dammmm thats a big vial

  16. #16
    Charger527's Avatar
    Charger527 is offline Senior Member
    Join Date
    Feb 2008
    Location
    Australia
    Posts
    1,259
    Quote Originally Posted by akaz13 View Post
    And store it all in a syringe(s)?

    How would you go about that? I know you would just draw it all at once, like w/ satchets... but what about injecting?

    Do you just use a new pin and shoot how ever many mg you plan to use, stop, and repeat when it is time for the next injection?
    yeah mate, just get all your syringes and needles ready to go, put one with 19 through once you draw your amount per shot, leave needle in and change syringes, put a injecting needle (leave cap on) on full syringe and store. countine until you have all your cycle ready to go.

    i like doing this anyway because when it comes time for a shot just grab syringe and swab and away you go, less hassel of drawing up each time.

    You only need to do it with vet grade stuff because they put i different rubber on it. (usally black instead of grey of what ive seen)
    Last edited by Charger527; 11-04-2008 at 09:20 PM.

  17. #17
    bene7422 is offline Associate Member
    Join Date
    Aug 2008
    Posts
    360
    I use a 20g

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •