injecting gear with slin needles?

Long story short, I only shoot glutes with 25 1.5 I'm starting to get scar tissue on both. Injection is tough to get in on some places and sometimes I bleed more. I know it's time to move spots. I have a fear of other spots. Done quads and delts but I do not like.

Do anyone of you inject gear with slin needles? I'm currently running test, tren, npp, Masteron so that's alot of pinning but I feel like I could easily pin delts, biceps, and quads with those slin needles. Would love to hear experienced user feedback. I was thinking loading with my normal 23g and back loading into my slin.

Quote:

---

Originally Posted by Athlete127

Long story short, I only shoot glutes with 25 1.5 I'm starting to get scar tissue on both. Injection is tough to get in on some places and sometimes I bleed more. I know it's time to move spots. I have a fear of other spots. Done quads and delts but I do not like. Do anyone of you inject gear with slin needles? I'm currently running test, tren, npp, Masteron so that's alot of pinning but I feel like I could easily pin delts, biceps, and quads with those slin needles. Would love to hear experienced user feedback.

---

thats to much gear to Ty to run through a slin pin

Quote:

---

Originally Posted by Bio-Active

thats to much gear to Ty to run through a slin pin

---

Wrong, Slin 29G is not only G2G, its in my opinion the best way to pin if your BF is lower than 14%
Bigger needles than 29G should not even exist, or exist only for Blood draw, or Fat people with thick layer.
I’ve done my last 3 cycles with slin pins, and never had any problem. Only thing, 29G bends some times, especially in complicated spots. But its not a mayor issue
You can rotate between delts, lats, quads, glutes. I’d go with long esters. Tren in glutes, tst in delts, nandrolone in quads, and masteron in lats.
Don’t mix nandrolone with tren, bad idea

Quote:

---

Originally Posted by XxAndreaxX

Wrong, Slin 29G is not only G2G, its in my opinion the best way to pin if your BF is lower than 14% Bigger needles than 29G should not even exist, or exist only for Blood draw, or Fat people with thick layer. I've done my last 3 cycles with slin pins, and never had any problem. Only thing, 29G bends some times, especially in complicated spots. But its not a mayor issue

---

you cannot run more than 1cc through an insulin syringe. Sure he could do it with multiple syringes but I would not inject more than 1cc with 1/2 inch pin. Your risking an abscess

I cant get a 29g to work the few times I have tried it but 27g 1" in or even 5/8"works pretty well.

Quote:

---

Originally Posted by lovbyts

I cant get a 29g to work the few times I have tried it but 27g 1" in or even 5/8"works pretty well.

---

did you back load it?

I too use slin needles....like you I'm worried about scare tissue so I did calves yday and no pain,teardrop last Sunday same again gonna do biceps next..

Quote:

---

Originally Posted by mark woods

I too use slin needles....like you I'm worried about scare tissue so I did calves yday and no pain,teardrop last Sunday same again gonna do biceps next..

---

wow? I have never understood why you guys use those areas to pin especially if your using slin pins. There is so much room to rotate on the quad alone

Quote:

---

Originally Posted by Bio-Active

did you back load it?

---

I tried that with an actual slin pin and it was a PITA so I just use a 3cc syringe and load with a 22g then swap out the needle with a 27g

Quote:

---

Originally Posted by Bio-Active

wow? I have never understood why you guys use those areas to pin especially if your using slin pins. There is so much room to rotate on the quad alone

---

3 pins twice a week so figured I would spread it around...no big deal it's painless try it!

Exactly, quad alone has very much room to pin without worry about scar tissue. Only problem could be the veins.
29G draws a little slower than 27G, and it might last over 1 minute to get 1cc in your sirynge. But are you in a freakin hurry?? I mean, I prefer to loose 1 minute in my life, than sticking a cannon in my muscle.

I know alot of people who pin Delts with slin needles. I have done it myself before

Quote:

---

Originally Posted by XxAndreaxX

Exactly, quad alone has very much room to pin without worry about scar tissue. Only problem could be the veins.
29G draws a little slower than 27G, and it might last over 1 minute to get 1cc in your sirynge. But are you in a freakin hurry?? I mean, I prefer to loose 1 minute in my life, than sticking a cannon in my muscle.

---

Just back load the slin pin. Draw with a reg 18-20 gauge pin and barrel and then pull the plunger out of the slin pin and back load it

Bro I've used a 25g 1" pin for traps, bi's, tri's, pecs, and legs. Painless and goes in like butter. Be CAREFUL popping your bi's there are tons of nerves in there. You can actually hear the needle tearing through the muscle. You'll now instantly if you hit a nerve cause your arm will act like it's having a seizure. Happened to me once and I never pinned my bi's again. To me other spots to go with anyways. I use 22g 1 1/2 for my butt. I've tried insulin pins before but they are a PITA and take forever to get the product out even when it's warm. Try hitting your traps with the 25g 1". It really does go in like butter and you don't even feel it

Quote:

---

Originally Posted by southernboy31

Bro I've used a 25g 1" pin for traps, bi's, tri's, pecs, and legs. Painless and goes in like butter. Be CAREFUL popping your bi's there are tons of nerves in there. You can actually hear the needle tearing through the muscle. You'll now instantly if you hit a nerve cause your arm will act like it's having a seizure. Happened to me once and I never pinned my bi's again. To me other spots to go with anyways. I use 22g 1 1/2 for my butt. I've tried insulin pins before but they are a PITA and take forever to get the product out even when it's warm. Try hitting your traps with the 25g 1". It really does go in like butter and you don't even feel it

---

I always pin with a 23g 1"... My prime spots are quads(outter), delts, and tris... Tris are like butta to me... I thought it'd be more sore! I've been thinking of hitting my bis but definitely not w/a 23g 1", was thinkin about using a slin pin for my bis... Do you think 1/2" is deep enough for bis??

Quote:

---

Originally Posted by NACH3

I always pin with a 23g 1"... My prime spots are quads(outter), delts, and tris... Tris are like butta to me... I thought it'd be more sore! I've been thinking of hitting my bis but definitely not w/a 23g 1", was thinkin about using a slin pin for my bis... Do you think 1/2" is deep enough for bis??

---

more power to you guys but I have had friends hit bi's and traps that will never do it again. There are enough injection spots in quads and delt to not have to move more than that but if it works for you great. Quads are the easiest to do when your doing your own

Quote:

---

Originally Posted by NACH3

I always pin with a 23g 1"... My prime spots are quads(outter), delts, and tris... Tris are like butta to me... I thought it'd be more sore! I've been thinking of hitting my bis but definitely not w/a 23g 1", was thinkin about using a slin pin for my bis... Do you think 1/2" is deep enough for bis??

---

Depends largely on your BF.

I like to use 27g by 1.25" for anything upper body , especially delts. You almost don't feel it go in or out. The biggest downside is, it takes FOREVER, but effective.

Be sure to split the dosages into more than one site if you're pushing in more than 1ml. Some can put 2 in their delt, but I learned the hard way I cant. Good luck

Quote:

---

Originally Posted by Buster Brown

Depends largely on your BF.

---

Right! As Bio stated above there are plenty of Inj. Sites just w/quads and delts. As long as My bf% is 12 or less do you think 1/2" on bis would do?

Yes it would be fine. I use 1/2" all the time. You can always push the syringe in indenting into your bi to get the needle in deeper if it worries you you're not getting in deep enough. I do my quads the same way.

Quote:

---

Originally Posted by NACH3

Right! As Bio stated above there are plenty of Inj. Sites just w/quads and delts. As long as My bf% is 12 or less do you think 1/2" on bis would do?

---

I would think at 12% or under you would be fine. I don't hit my biceps .....I hear alot of guys using 5/8ths slin pins. Does that extra 1/8 matter? Who knows

Quote:

---

Originally Posted by Buster Brown

I would think at 12% or under you would be fine. I don't hit my biceps .....I hear alot of guys using 5/8ths slin pins. Does that extra 1/8 matter? Who knows

---

I doubt it matters much...like the other guy said press in a bit.

Quote:

---

Originally Posted by NACH3

Right! As Bio stated above there are plenty of Inj. Sites just w/quads and delts. As long as My bf% is 12 or less do you think 1/2" on bis would do?

---

why pin bi's with so many other sites bro? You already know my opinion

True... Basically it was more outta curiosity but if it worked why not... But at the same time I wouldn't even to be able to push what was need in one shot! I agree with ya... Why fix something that ain't broke!

Quote:

---

Originally Posted by NACH3

True... Basically it was more outta curiosity but if it worked why not... But at the same time I wouldn't even to be able to push what was need in one shot! I agree with ya... Why fix something that ain't broke!

---

exactly holding that pin steady would be a nightmare with one hand and you need to keep it in all the way since the pin is smaller. Quads all the way

^^^ yup Quads delts for sure! & tris are nice w/me... But another good point you bring - easily could break, if not steady!

Quote:

---

Originally Posted by NACH3

^^^ yup Quads delts for sure! & tris are nice w/me... But another good point you bring - easily could break, if not steady!

---

I really doubt it's gonna break but if it's moving around in there you are gonna have more pip for sure. Ouch

Quote:

---

Originally Posted by Bio-Active

I really doubt it's gonna break but if it's moving around in there you are gonna have more pip for sure. Ouch

---

For some reason I was thinkin "about reachin around to pin your glute" as I was writing... Lol if someone had a shaky hand... Don't know why I thought of that. Haha but damn that would suck if a needle did break off! You'd really gotta be torqing that mofo or had never done it b4 and was super nervous... IDK - just the thought... Yikes! Hahaha

Quote:

---

Originally Posted by NACH3

For some reason I was thinkin "about reachin around to pin your glute" as I was writing... Lol if someone had a shaky hand... Don't know why I thought of that. Haha but damn that would suck if a needle did break off! You'd really gotta be torqing that mofo or had never done it b4 and was super nervous... IDK - just the thought... Yikes! Hahaha

---

yeah it's not gonna break and if it did it would work its way out. I would be more concerned with the pip

Quote:

---

Originally Posted by Bio-Active

yeah it's not gonna break and if it did it would work its way out. I would be more concerned with the pip

---

True about it breaking(and I wasn't concerned for myself... Just in general lol)... But right on with the pip - 4-sure!

Quote:

---

Originally Posted by Bio-Active

more power to you guys but I have had friends hit bi's and traps that will never do it again. There are enough injection spots in quads and delt to not have to move more than that but if it works for you great. Quads are the easiest to do when your doing your own

---

I hit nerves a lot in traps. Stopped pinning there even with slin pins.