Please no more flaming, this is a serious question...

[JerzeyBoy]

1 ML=100MG

how do you put 300mg in a syringe?

Please no more flaming, this is a serious question.

[Ntpadude]

1 ML=100MG

how do you put 300mg in a syringe?

Please no more flaming, this is a serious question.

3 CC. If 1 ML = 250 mg, then 1 CC = 1 ML = 250 mg.

Get it? 1 ML is equal to 1 CC.

In your example 1 ML = 100 mg. Then 100 MG is 1 CC.

[JerzeyBoy]

3 CC. If 1 ML = 250 mg, then 1 CC = 1 ML = 250 mg.

Get it? 1 ML is equal to 1 CC.

In your example 1 ML = 100 mg. Then 100 MG is 1 CC.

It's finally making sense I think, lol.

Ok so for an example...

1ml= 200mg than that means it is 2cc?

[Gear]

Pull the oil out and stop at 3ml

[Gear]

Not being rude or anything, but its common sense to think that you are not very educated about AAS if you are unsure on how to put 300mgs in a syringe, knowing that 1ml = 100mgs. Please research before you start jabbing yourself. Good luck

[JerzeyBoy]

Not being rude or anything, but its common sense to think that you are not very educated about AAS if you are unsure on how to put 300mgs in a syringe, knowing that 1ml = 100mgs. Please research before you start jabbing yourself. Good luck

so say i wanna put 400mg in the syringe, and 1ml=100mgs, I pull out the oil until it stops at 4cc right?

[JerzeyBoy]

so say i wanna put 400mg in the syringe, and 1ml=100mgs, I pull out the oil until it stops at 4cc right?

I know I sound retarted but I just wanna make sure I got it right...

[Ntpadude]

Not being rude or anything, but its common sense to think that you are not very educated about AAS if you are unsure on how to put 300mgs in a syringe, knowing that 1ml = 100mgs. Please research before you start jabbing yourself. Good luck

Go easy on him... sounds like he researched enough to figure out how to get the gear. For those of us like me who knew no one taking gear before figuring out a way to get it via internet, then before you know it you have a big of needles and your bottle of gear sitting in front of you and scared as hell thinking to yourself, do I really want to do this?? The fun is only just starting for this guy. Wait until he tries to jab himself in the butt! I couldnt do it and thats why quads are the shyt for me. But yea I remember having to e-mail my source, "Hey dude, how do you measure out 500 mg into a syringe if it says 250 mg per ML??" That is everyone's last stupid question shortly before they actually end up giving themselves their own first injection.

[JerzeyBoy]

Go easy on him... sounds like he researched enough to figure out how to get the gear. For those of us like me who knew no one taking gear before figuring out a way to get it via internet, then before you know it you have a big of needles and your bottle of gear sitting in front of you and scared as hell thinking to yourself, do I really want to do this?? The fun is only just starting for this guy. Wait until he tries to jab himself in the butt! I couldnt do it and thats why quads are the shyt for me. But yea I remember having to e-mail my source, "Hey dude, how do you measure out 500 mg into a syringe if it says 250 mg per ML??" That is everyone's last stupid question shortly before they actually end up giving themselves their own first injection.

I almost got it...If you don't mind, give me the answer to that and how you got it... the "Hey dude, how do you measure out 500 mg into a syringe if it says 250 mg per ML??" It'll really help much, appreciate it...

[Ntpadude]

I almost got it...If you don't mind, give me the answer to that and how you got it... the "Hey dude, how do you measure out 500 mg into a syringe if it says 250 mg per ML??" It'll really help much, appreciate it...

OK 250 mg per ml... remember a ML is equal to a CC. So 500 mg would be "2" ML or 2 CC's.

[Gear]

Go easy on him...

I wasnt having a go at him. Just want to make sure he dont fuc* up thats all.

[Gear]

I think you are gtting confused with ml and cc. Bro here make it nice and simple for you.

CC and ML is same thing. The reason why they have CC and ML is coz in some countries they use CC, in others they use ML. Its the same measurements

[Anhydro78]

Check your Personal message board.

[Gear]

Hey bro, now that you know about ML/CC/MGS. This might be some usefull info for you incase you dont already know...

http://67.18.108.244/showthread.php?t=1272

[JerzeyBoy]

I finally got it...I feel stupid now knowing that it was so easy lol.

But here's another question...I bet I'll get flammed for this **** too

How about if it says 200mg=2.5ml Now what? None of my juice says this, but if it ever does in the future I don't want to ask another stupid question, might as well get out all my stupid questions now.

[Ntpadude]

I finally got it...I feel stupid now knowing that it was so easy lol.

But here's another question...I bet I'll get flammed for this **** too

How about if it says 200mg=2.5ml Now what? None of my juice says this, but if it ever does in the future I don't want to ask another stupid question, might as well get out all my stupid questions now.

Its a matter of doing math. The fact is, the bottles are always going to tell you how much dope is in 1 CC or 1 ML of solution. There isnt going to be any of this ### mg per 2.5 ml. Everything is going to tell you how strong it is per each 1 ML or 1 CC. IN other words test prop tends to be 100 mg per 1 ML, test en/test cyp tend to be 250 mg per 1 ml although there are some 300 mg and some 200 mg varieties. You rarely see anything outside of this norm.

[PT]

maybe you grew up next to one of those chemical plants in jersy, if not then what is your excuse for being so stupied. my advise to you is wait at least 3 years before you even think about doing steroids.

[JerzeyBoy]

maybe you grew up next to one of those chemical plants in jersy, if not then what is your excuse for being so stupied. my advise to you is wait at least 3 years before you even think about doing steroids.

Knew more of this 5ht was coming. Anyway, can someone answer that question for me please?

[freakmaster]

(maybe you grew up next to one of those chemical plants in jersy, if not then what is your excuse for being so stupied. my advise to you is wait at least 3 years before you even think about doing steroids.)

Seriously bro, you should not be taking roids if you don't know simple math.
200mg at 2.5ml. so if you need say 600mg that would be 7.5ml, or 7.5cc. Or if you need 290mg and you have a concentration of 50mg per ml(or cc) you would need 5.82ml so you would round that to 5.8ml, always round to the nearest tenth, 1-4 round down, 5-9 round up. But 5 could go either way, depends on the drug. Since gear is almost always a even number you don't have to worry about it. So the formula for figuring this out is you take the concentration of say example the above, just divide 290 by 50 and there you have your ml's. Whatever the concentration of the drug is is what you use to divide with. Example: you need 300mg and you have a concentration of xyz drug that is 20mg/ml, you would divide 300 by 20 and get you answer.

[Gear]

[QUOTE=freakmaster](maybe you grew up next to one of those chemical plants in jersy, if not then what is your excuse for being so stupied.[QUOTE]


There is no need for that man. I told him to do some research as well. He just wants to learn.

[Ntpadude]

(maybe you grew up next to one of those chemical plants in jersy, if not then what is your excuse for being so stupied. my advise to you is wait at least 3 years before you even think about doing steroids.)

Seriously bro, you should not be taking roids if you don't know simple math.
200mg at 2.5ml. so if you need say 600mg that would be 7.5ml, or 7.5cc. Or if you need 290mg and you have a concentration of 50mg per ml(or cc) you would need 5.82ml so you would round that to 5.8ml, always round to the nearest tenth, 1-4 round down, 5-9 round up. But 5 could go either way, depends on the drug. Since gear is almost always a even number you don't have to worry about it. So the formula for figuring this out is you take the concentration of say example the above, just divide 290 by 50 and there you have your ml's. Whatever the concentration of the drug is is what you use to divide with. Example: you need 300mg and you have a concentration of xyz drug that is 20mg/ml, you would divide 300 by 20 and get you answer.

Its not a matter of being stupid... the guy's just inexperienced and probably doesnt have a lot of juicers around in person who'd show him or tell him in person. If you ask me he is asking the right questions. Not only that but I suspect he's poking himself for the first time right now, ehehe how much you wanna bet he only injects 1/4 or 1/2 of the syringe the first time and then chicken's out and pulls it out. I know I did about 1/2 way the first time and over the last year, hearing other dude's first time stories, seems the first time shooting yourself has very common similarities for each of us, and yet we all survived, managed to miss the major arteries and siatic nerve. Jersey guy will do just fine and survive too.

[JerzeyBoy]

Its not a matter of being stupid... the guy's just inexperienced and probably doesnt have a lot of juicers around in person who'd show him or tell him in person. If you ask me he is asking the right questions. Not only that but I suspect he's poking himself for the first time right now, ehehe how much you wanna bet he only injects 1/4 or 1/2 of the syringe the first time and then chicken's out and pulls it out. I know I did about 1/2 way the first time and over the last year, hearing other dude's first time stories, seems the first time shooting yourself has very common similarities for each of us, and yet we all survived, managed to miss the major arteries and siatic nerve. Jersey guy will do just fine and survive too.

I am def not poking yet, haha. I have most of my gear, the only bit I don't have left is the clomid, and I am not starting unless I have that too. So in maybe about another 2 or 3 weeks I join the dark side.

[Angelis]

not again bro stop asking so many imposibly stupid questions whats that the 7 tonight....no juice will ever say 200mg/2.5ml it would say 500mg/1ml which I have seen I have seen before in fact Ntpadude

[Anhydro78]

I know alot of you guys that made rude remarks tried to help him a bunch of times. I even was like WTF a couple of times myself. But you guys have to think before you guys make remarks like this. There is no reason to run this guy off. Before I came here I was a member of just one board, and over there the mods would yell at you if you started treating people like this. I would hope that anyone that comes here can get safe,reliable advise. Without fear of being imbarassed.

I know alot of you guys tried.

[weightshead]

1cc (or 1 cm³) == 1 millilitre (mL)

1cc is a way of measuring volume, it is a _cubic_ centimetre.
1ml just means its one thousandth of a litre. (another volume measure).

[crack]

wow making jersians look back
thank god i moved to pa
j/k
better to be safe
rock on dude!

[crack]

and us pennsylvanians can't spell either

[Alexander the Graet]

wow! and I got flamed for spelling my name wrong "graet" instead of great! Please have no mercy on this guy! I think he just didn't attend his math class at all! Just kidding bro! take a joke I like getting flamed at least u get attention from the members! who I think looked more confused than u trying to explain the whole thing!

[Paingain]

Did anybody elses hands shake from nervousness when they did thier first injection?

[Ntpadude]

Did anybody elses hands shake from nervousness when they did thier first injection?

I had shakey hands and nervousness everytime I injected during the entire first cycle. Now its become like nothing as if I was a diabetic taking my daily insulin.

[Alexander the Graet]

my hand really shaked when I did my first ejaculation!

[Alexander the Graet]

do 1 cc at a time and inject yourself 4 times! or maybe even better .5 cc and do 8 shots you will relly swell!

[2dsl4u]

do 1 cc at a time and inject yourself 4 times! or maybe even better .5 cc and do 8 shots you will relly swell!

Graet answer!!! I'll have to remember that because I wasn't sure what muscle would be able to absorb 4ml's of a substance.

[freakmaster]

(maybe you grew up next to one of those chemical plants in jersy, if not then what is your excuse for being so stupied. my advise to you is wait at least 3 years before you even think about doing steroids.)




Hey Nptadude and Gear I did not say that just laughed at what Pietro said. I am trying to help him to so read the whole thread before you start preaching bro. As for him using gear he should definatly wait. He does not have a good grasp on nutrition or the proper knowledge to use gear yet. Instead of helping him to use gear you should be asking him what his bodybuilding knowledge is on nutrition and training before you start giving advice on using gear, because he is not ready, period.

[Alexander the Graet]

how do u become a junior member or a senior or vet ! I am A NEWBEE but i know what am doing! by the way I am a Registered nurse and my wife a nurse anesthesist! My personal doctor is an edocrinologist who is onto BB himself! not that I am an expert but I see guy ask the most ignorant questions and are already senior or junior members! I dont care about my member status but please! please! by the way no flamingintended! just curiosity on how do some become so advanced being so retarded!

[BUYLONGTERM]

how do u become a junior member or a senior or vet ! I am A NEWBEE but i know what am doing! by the way I am a Registered nurse and my wife a nurse anesthesist! My personal doctor is an edocrinologist who is onto BB himself! not that I am an expert but I see guy ask the most ignorant questions and are already senior or junior members! I dont care about my member status but please! please! by the way no flamingintended! just curiosity on how do some become so advanced being so retarded!

Don't worry about titles. But, it is done by post count.

[Maraxus]

Its not quantity bro, its quality. And if you can provide input from experience, you will definately earn the respect of other members, thus post counts dont mean jack to me.

[iNvid]

Its not quantity bro, its quality. And if you can provide input from experience, you will definately earn the respect of other members, thus post counts dont mean jack to me.

True. I've seen a few mods and vets with just a few hundred posts.

[asymmetrical1]

True. I've seen a few mods and vets with just a few hundred posts.

dude, you are averaging about 500 posts a month....wtf

[dumblucky]

dude, you are averaging about 500 posts a month....wtf

thats nothin enid_sprinter is averaging 25 posts a day