Results 1 to 16 of 16

Thread: First Injection Done!

  1. #1
    Join Date
    Feb 2009
    Location
    texas
    Posts
    212

    First Injection Done!

    I injected for the first time ever this morning, 1cc of Test E, and I had a few surprises.

    1. Drawing from the sterile sealed vial was a pain! I injected 1cc of air and then tried to draw and I couldn't get any oil into the syringe! I heated up some water ad let the vial sit in there for a few minutes, and tried it again. It actually drew this time, but still amazingly slow. It took about 3 minutes of consistent pressure to draw 1cc! What's up with that??

    2. It didn't hurt AT ALL! I had myself so worked up that I sat and stared at the needle for like 5 minutes and when I finally stuck it in I was literally laughing at myself.

    3. I have no pain or soreness from the injection, but I do have this slightly nauseous feeling in my stomach. I had a hard time eating after injecting, too. Is this normal for the first time, or is this something I will have to get used to?

  2. #2
    Join Date
    Aug 2006
    Location
    Houston
    Posts
    4,218
    what is the mg dosing for the vial and what size pins you usin, shouldnt be that hard to draw

  3. #3
    Join Date
    Feb 2009
    Location
    texas
    Posts
    212
    I transferred to a 20cc sterile sealed vial. The Test E is 250mg/ml.

    I drew with a 23g needle into a 3cc syringe. I shot with a 25g and it went in smooth and quick, that's why I was confused about why it was so hard to draw.

  4. #4
    Join Date
    Mar 2009
    Location
    Carolina's
    Posts
    2,363
    I have had the same problem . I just put extra air in the vial

  5. #5
    Join Date
    Aug 2006
    Location
    Houston
    Posts
    4,218
    shouldnt be that hard,, you flippin it over and pulling from the oil

  6. #6
    Join Date
    Feb 2009
    Location
    texas
    Posts
    212
    Quote Originally Posted by chuckt12345 View Post
    shouldnt be that hard,, you flippin it over and pulling from the oil
    Yes i am, although I do have a question:

    When I inject air into the vial, should I shoot the air through the oil, or shoot the air into the air? Hopefully that makes sense...

  7. #7
    Join Date
    Apr 2009
    Posts
    213
    Quote Originally Posted by aestheticmind View Post
    I injected for the first time ever this morning, 1cc of Test E, and I had a few surprises.

    1. Drawing from the sterile sealed vial was a pain! I injected 1cc of air and then tried to draw and I couldn't get any oil into the syringe! I heated up some water ad let the vial sit in there for a few minutes, and tried it again. It actually drew this time, but still amazingly slow. It took about 3 minutes of consistent pressure to draw 1cc! What's up with that??

    You need to create more of a vacuum in the vile. It's not complicated man. Just preload the syringe with 3cc of air and then push down on the plunger, it will create greater negative pressure within the vial. Then draw 1mL, it should take about 1 min to draw if you don't heat it.

    2. It didn't hurt AT ALL! I had myself so worked up that I sat and stared at the needle for like 5 minutes and when I finally stuck it in I was literally laughing at myself.

    Enanthane doesn't hurt. Unless you're a *****...

    ... or unless you have some highly concentrated gear ( < 400mg/mL ), which you don't.


    3. I have no pain or soreness from the injection, but I do have this slightly nauseous feeling in my stomach. I had a hard time eating after injecting, too. Is this normal for the first time, or is this something I will have to get used to?

    It's just nerves. You probs feel light headed as well right? It's normal, you won't even notice it next injection. One thing... watch out for test-flu, you're likely gunna get it soon
    use the search button next time. these questions are pretty simple buds!

    good luck with the cycle

  8. #8
    Join Date
    Aug 2006
    Location
    Houston
    Posts
    4,218
    shoot in the air unless you want bubbles,, just put a few cc's of air in it then pull back all the way to the 3ml mark,, its should come in no prob

  9. #9
    Join Date
    Jun 2008
    Posts
    202
    Quote Originally Posted by LexusIS09 View Post
    One thing... watch out for test-flu, you're likely gunna get it soon
    It is flu season

  10. #10
    Join Date
    Mar 2009
    Posts
    52
    I am not talking from experience but I have read alot of threads from more experienced users who say they use an 18g syringe to draw and switch to a 23g to shoot.

  11. #11
    Join Date
    Mar 2009
    Posts
    52
    sorry I meant 18g pin NOT syringe! my bad.

  12. #12
    Join Date
    Feb 2009
    Location
    texas
    Posts
    212
    18g jacked up the rubber stopper on my vial!

    I used an 18g to transfer the oil into the vial, and the rubber stopper has a visible chunk out of it.

  13. #13
    Join Date
    Apr 2005
    Location
    Getting madcow treatments
    Posts
    16,450
    Ive never had a problem with drawing with 18 and shooting with 23 or 25

  14. #14
    Join Date
    Apr 2009
    Location
    the north pole
    Posts
    297
    TEST E dont hurt?!?!?! try it @ 350mg per ML, i tasted the gear today and my tongue was numb for like 5 mins there is so much BA i it

  15. #15
    Join Date
    Sep 2008
    Location
    Wollongong Australia
    Posts
    171
    why on earth would u taste your gear?

  16. #16
    Join Date
    Apr 2005
    Location
    Getting madcow treatments
    Posts
    16,450
    Quote Originally Posted by doctorclaus View Post
    TEST E dont hurt?!?!?! try it @ 350mg per ML, i tasted the gear today and my tongue was numb for like 5 mins there is so much BA i it



Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •