new gear

[johnCash]

a friend of mine has some test 400 mg or test 400 that hes recomending. its from australia its in a 4000mg/10ml vial. has anyone ever tried or heard of this brand and would it be good for a first time cycle?
each 400mg has test cyp 175mg
test en 175mg
test prop 50mg
benzyl benzoate 100mg
benzyl alcohol 9mg
prob do 400mg/1cc 2x/week

[Phate]

a friend of mine has some test 400 mg or ******* that hes recomending. its from australia its in a 4000mg/10ml vial. has anyone ever tried or heard of this brand and would it be good for a first time cycle?
each 400mg has test cyp 175mg
test en 175mg
test prop 50mg
benzyl benzoate 100mg
benzyl alcohol 9mg
prob do 400mg/1cc 2x/week

i would edit out the name of the test, that's not allowed as it can be traced back to the source

i wouldn't use it because of the prop ester, which needs to be injected ed/eod

[seriousmass]

a friend of mine has some test 400 mg. its from australia its in a 4000mg/10ml vial. has anyone ever tried or heard of this brand and would it be good for a first time cycle?
each 400mg has test cyp 175mg
test en 175mg
test prop 50mg
benzyl benzoate 100mg
benzyl alcohol 9mg
prob do 400mg/1cc 2x/week

I've seen similar testosterone blends in the past. I have no clue why they even add the prop. It should definitely just be another long-ester like deconate IMO.. but whatever.

Anyways, yah you could inject this compound 2x per week. You won't be taking advantage of the prop ester... but then again 50mg EW of prop is basically nothing. All it's going to do is make your injection site sore! haha.

[Phate]

I've seen similar testosterone blends in the past. I have no clue why they even add the prop. It should definitely just be another long-ester like deconate IMO.. but whatever.

Anyways, yah you could inject this compound 2x per week. You won't be taking advantage of the prop ester... but then again 50mg EW of prop is basically nothing. All it's going to do is make your injection site sore! haha.

he's gonna be injecting 2x a week so it will be 100mg of prop

[seriousmass]

he's gonna be injecting 2x a week so it will be 100mg of prop

Actually no bro.

I'm pretty sure he meant that he'll be splitting the injection up (IE monday / thursday)

Therefore only 1mL a week = aka = 50mg EW.

[Phate]

Actually no bro.

I'm pretty sure he meant that he'll be splitting the injection up (IE monday / thursday)

Therefore only 1mL a week = aka = 50mg EW.

i can't tell from how he's writing it, but i hope you're right because 800mg/wk of this stuff for a first cycle with an AI is going to be a pain in the ass, literally and figuratively, lol

[seriousmass]

i can't tell from how he's writing it, but i hope you're right because 800mg/wk of this stuff for a first cycle with an AI is going to be a pain in the ass, literally and figuratively, lol

Yeah, 400mg/mL will feel like your a*s got charlie-horsed repeatedly

not to mention, benzyl benzoate 100mg; benzyl alcohol 9mg is going to make it sting!! 400mg/mL is a LOT of solvent to dilute per mL.

I'm actually using a T-400 blend for my upcoming cycle; except it's a blend of long-estered test... muchhh better

[johnCash]

Actually no bro.

I'm pretty sure he meant that he'll be splitting the injection up (IE monday / thursday)

Therefore only 1mL a week = aka = 50mg EW.

just to clear everyhting up i was planning on doing 2 ccs/ week so 800 mg. is that too much for a first time? and where is the ai?

[Phate]

just to clear everyhting up i was planning on doing 2 ccs/ week so 800 mg. is that too much for a first time? and where is the ai?

i think you should read this

http://forums.steroid.com/showthread.php?t=355742

[Aussiebb]

a friend of mine has some test 400 mg or test 400 that hes recomending. its from australia its in a 4000mg/10ml vial. has anyone ever tried or heard of this brand and would it be good for a first time cycle?
each 400mg has test cyp 175mg
test en 175mg
test prop 50mg
benzyl benzoate 100mg
benzyl alcohol 9mg
prob do 400mg/1cc 2x/week

Thats bullshit man.

Nobody makes test at 400mg.Powder is dead hard to get into aus without a brewer wasting 4gms per vial.

And bb 100mg, ba 9mg. Do you know what that even means or refers to?

Did he make up the test cyp, enan and prop individually then mix them all up in a 10ml vial?

Or did he make all the powders at once?

smells abit sus man.

[Phate]

Thats bullshit man.

Nobody makes test at 400mg.Powder is dead hard to get into aus without a brewer wasting 4gms per vial.

And bb 100mg, ba 9mg. Do you know what that even means or refers to?

Did he make up the test cyp, enan and prop individually then mix them all up in a 10ml vial?

Or did he make all the powders at once?

smells abit sus man.

actually test 400 is pretty common and all the have to do to make it is have basic math skill and be able to weigh out the powder correctly

[seriousmass]

Thats bullshit man.

Nobody makes test at 400mg.Powder is dead hard to get into aus without a brewer wasting 4gms per vial.

And bb 100mg, ba 9mg. Do you know what that even means or refers to?

Did he make up the test cyp, enan and prop individually then mix them all up in a 10ml vial?

Or did he make all the powders at once?

smells abit sus man.

lol... Obviously you didn't read my post like 2 up from yours.

I have T-400 right now. Actually, there is a picture in the "pictures of AAS by manufacturer" forum, in case you'd like to have a look.

I don't know what you're smoking bro, but T-400 blends are not uncommon whatsoever.... maybe in Australia... but that's because you guys can't get sh*t already!!

people just don't run them often, because some people don't like multi-esters, but mostly because people can't deal with the pain of injecting such a concentrated solvent

[seriousmass]

just to clear everyhting up i was planning on doing 2 ccs/ week so 800 mg. is that too much for a first time? and where is the ai?

YES, THAT IS WAY TOO MUCH FOR A FIRST CYCLE.

I couldn't make it any clearer... so hopefully you got the point. lol

Do 0.5cc x 2 per week. = 1mL per week = 400mg.

You'll see great gains off that. Don't bump the dosage up mid-cycle. Keep it consistent.

Peace.

[redz]

I used Test Enanthanate in my last cycle that was 400mg/ml and also virtually painless. 800mg of test is way too much for a first cycle.

[Aussiebb]

lol... Obviously you didn't read my post like 2 up from yours.

I have T-400 right now. Actually, there is a picture in the "pictures of AAS by manufacturer" forum, in case you'd like to have a look.

I don't know what you're smoking bro, but T-400 blends are not uncommon whatsoever.... maybe in Australia... but that's because you guys can't get sh*t already!!

people just don't run them often, because some people don't like multi-esters, but mostly because people can't deal with the pain of injecting such a concentrated solvent

Yeah, but your from canada.Im talking about Australia here.Australia remember.

We dont have the capabilities to get steroids in Aus to get shit like other countries.

I have been in this biz for many years and never seen 400mg/test in Australia.And i know many people and even tetsed various gears.

And it looks like you dont know what your talking about.bb 100mg and ba 9mg.Does that make sense to you?Looks like you have never brewed in your life.

Why dont you help the bloke and tell him whats wrong with the gear, instead of telling him its ok to use.

And ive seen this blends many times in Aus.All they are doing are getting few mls of prop, cyp,enan, putting it in a vial, and say its some supertest.Add those mg all up and they are nowhere near 4gms per vial

[johnCash]

We dont have the capabilities to get steroids in Aus to get shit like other countries.

I have been in this biz for many years and never seen 400mg/test in Australia.And i know many people and even tetsed various gears. HERE YOU SAY YOU NEVER SEEN IT

And it looks like you dont know what your talking about.bb 100mg and ba 9mg.Does that make sense to you?Looks like you have never brewed in your life.

Why dont you help the bloke and tell him whats wrong with the gear, instead of telling him its ok to use.

And ive seen this blends many times in Aus.All they are doing are getting few mls of prop, cyp,enan, putting it in a vial, and say its some supertest.Add those mg all up and they are nowhere near 4gms per vial

AND HERE YOU SAY YOU HAVE?

hey aussie, have you ever tried gear that someone got from a doctor there? cause i talked to someone who had gear from a doctor here and it was identical to this brand that i had just it was made here not in australia. the colors on the box was dif that was it

[johnCash]

YES, THAT IS WAY TOO MUCH FOR A FIRST CYCLE.

I couldn't make it any clearer... so hopefully you got the point. lol

Do 0.5cc x 2 per week. = 1mL per week = 400mg.

You'll see great gains off that. Don't bump the dosage up mid-cycle. Keep it consistent.

Peace.

thx for the advice and ya i got the point lol whats in your t-400?

[Aussiebb]

AND HERE YOU SAY YOU HAVE?

hey aussie, have you ever tried gear that someone got from a doctor there? cause i talked to someone who had gear from a doctor here and it was identical to this brand that i had just it was made here not in australia. the colors on the box was dif that was it

Where in my posts did i say i have seen test 400 in Aus?

All i can say is, good luck to you bro.Hope you do well.

If it is 400mg/ml, then just do 1ml week.

Other than that,im happy to talk in PM,