Slin pins for quads

[riotz0r]

I figured I would just post this here because I keep reading over and over that you can't inject a quad with a 29g 1/2" slin pin and then there's always people who argue you can... Well I finally just decided to try it yesterday, I back loaded my slin pin with 1ml of test cyp and pinned my quad with the slin pin... Smoothest easiest pin I've ever had.... My bf is around 12% probably but I carry no fat in my quads so that might have something to do with it but the 1/2" I feel was plenty, no lump no nothing... Just thought I'd share in case there are people on the fence who haven't tried this... Probably the only way I'll inject from here on out....

Oh and to add, the test cyp had NO issues going through the slin pin, I felt like I didn't have to use any more pressure on the plunger than with my 25g pins...

[Red Bastard]

My experience exactly!

Don't knock it unless you've tried it...

[Machdiesel]

So here's my question. You can pin test either sub q or IM. So even if the slin pin doesn't fully penetrate the quad who cares? Muscle or fat, your body utilities it the sme

[Juced_porkchop]

So here's my question. You can pin test either sub q or IM. So even if the slin pin doesn't fully penetrate the quad who cares? Muscle or fat, your body utilities it the sme

high volume in IM wil hurt ALOT LETT and not knot up like if you try put it in SubQ. for hrt and small shots id do subq. but for cycles no..
I just pin quads with 25g 1"

[PistolPete33]

I use a regular syringe and needle to draw the oil from the vial. Then, when I switch needles I use a 27 guage 1 1/4" needle and it'a awesome. I can get it deep into the muscle and virtually pain free. I heat the oil prior to injecting to make it pass thru the needles easier. At first I was really nervous about breaking the needle inside my leg so I took one and tried to break it on the counter and this thing just flexed and never broke. I won't do it any other way now.

[Ashop]

I figured I would just post this here because I keep reading over and over that you can't inject a quad with a 29g 1/2" slin pin and then there's always people who argue you can... Well I finally just decided to try it yesterday, I back loaded my slin pin with 1ml of test cyp and pinned my quad with the slin pin... Smoothest easiest pin I've ever had.... My bf is around 12% probably but I carry no fat in my quads so that might have something to do with it but the 1/2" I feel was plenty, no lump no nothing... Just thought I'd share in case there are people on the fence who haven't tried this... Probably the only way I'll inject from here on out....

Oh and to add, the test cyp had NO issues going through the slin pin, I felt like I didn't have to use any more pressure on the plunger than with my 25g pins...

Some people swear by this method. Been using it with TREN the last couple weeks. So far,,so good.

[Bio-Active]

I been pinning quads with 28 1/2 inch slin pin for years. Pin nice and slow it has always worked just fine for me. The only downside is you can only pin 1cc at a time but less scar tissue and almost no pip

[ScotchGuard02]

You can pin quad with a 1/4" pin if you want. It just won't be as efficient as a 1" pin. If the pin is long enough to break the skin you can inject AAS. It's just that some pins are more efficient than others. I've pinned Test with 1/2" slin pins and HGH with 1.5" 23ga pins because that's all I had. They all work. Some are just more efficient at the specific application.