Results 1 to 12 of 12

Thread: syringe/needle advice

  1. #1
    Join Date
    Sep 2016
    Posts
    4

    syringe/needle advice

    Hello guys, i am planning to run balkan pharma test e 250 mg every 3,5 days along with hcg and a cycle of tb500 before that. Can you please advice what kind of syringes and with what needles should i get? Or at least how to choose the right ones?

  2. #2
    Join Date
    May 2014
    Posts
    4,109
    Syringe brand doesn't matter much.

    Get a 100 count box of 3ml 22-23g syringes that are at least 1" long.

    Get a 100 count box of 25 needles. If you're body fat is low than 1" will suffice. If your a bigger guy and your bf is around 15% then 1.5" would be a better choice.

    Also, pick up a box or two of alcohol swabs.

  3. #3
    Join Date
    Aug 2015
    Location
    Southeast, USA
    Posts
    2,042
    I believe numbere has you covered bro! Good luck!

  4. #4
    Quote Originally Posted by numbere View Post
    Syringe brand doesn't matter much.

    Get a 100 count box of 3ml 22-23g syringes that are at least 1" long.

    Get a 100 count box of 25 needles. If you're body fat is low than 1" will suffice. If your a bigger guy and your bf is around 15% then 1.5" would be a better choice.

    Also, pick up a box or two of alcohol swabs.

    Great advice! Only thing I would add is a couple of pins to draw with 20g.

  5. #5
    Join Date
    May 2014
    Posts
    4,109
    Quote Originally Posted by ALIN View Post
    Great advice! Only thing I would add is a couple of pins to draw with 20g.
    I've never used larger than a 22g for drawing because I've heard drawing with an 18g will eventually lead to peices of stopper being hole punched and ending up in the vial.

    You've been drawing with 20g and haven't experienced any issues?

  6. #6
    Join Date
    Apr 2014
    Location
    HOME
    Posts
    6,898
    20g for drawing is fine, its what I use.

  7. #7
    Join Date
    May 2014
    Posts
    4,109
    Quote Originally Posted by Mr.BB View Post
    20g for drawing is fine, its what I use.
    Good to know, next time I order syringes I'll get them with 20g needles attached.

    Any problems with 30ml jugs?

  8. #8
    Join Date
    Apr 2014
    Location
    HOME
    Posts
    6,898
    Quote Originally Posted by numbere View Post
    Good to know, next time I order syringes I'll get them with 20g needles attached.

    Any problems with 30ml jugs?
    Dont like jugs

    (hummm, this doesnt sound very good)

  9. #9
    Join Date
    May 2014
    Posts
    4,109
    Quote Originally Posted by Mr.BB View Post
    Dont like jugs
    That's cool, more jugs for me

  10. #10
    I've been shooting hcg with a insulin needle maybe 5/8 , is that wrong, ?

  11. #11
    Join Date
    May 2014
    Posts
    4,109
    Quote Originally Posted by BuildingBlock View Post
    I've been shooting hcg with a insulin needle maybe 5/8 , is that wrong, ?
    Not at all, I use 1/2" 29-31g for hcg.

    There's a big difference between pinning a few units of a water based compound and a few ml of an oil based compound.

    Some guys use slin pins for TRT but they're not using cycle doses.

    I've shot TNE and sdrol with a 1/2" slin pin pre workout but my bf doesn't get much higher than 12% and they are suspended in thin oils.

    The rule of thumb is don't shoot more than 0.5ml subq. Depending on you bf, where you pin and what you're pinning you can work around this loose rule.
    Last edited by numbere; 10-09-2016 at 10:01 PM.

  12. #12
    Join Date
    Dec 2014
    Posts
    1,438
    Quote Originally Posted by numbere View Post
    Good to know, next time I order syringes I'll get them with 20g needles attached.

    Any problems with 30ml jugs?
    Probably not with 30s, but with 50s I have to transfer around 20ml to sterile vials. Thats using 20g, I use 23g most of the time now. Even with the 23s I just transferred 24 ml from a 50ml jug. The stopper was looking very rough, and thought it was about to give. I think this situation was a low quality stopper, and I have had it for a while.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •