29G 1/2 inch slin ok for prop spot injects

[gixxer]

Anyone have any results using a 29g 1/2inch slin needle for prop spot injections?

[simplecanibus]

would 1/2 inch go down far enough? i think 1 inch is the standard, but i seriously think a one inch would be fine for spot injections.

[dumblucky]

From what ive read and researched its OK
if your BF is low enough
delts seem to be the fav for .5" spot inj

[powerlifter]

yeah delts should be good - or if you are a lean mother ****** then anywhere within reason

[Solrock]

I didn't think prop would fit through a 29g... I will have to try it.

[inheritmylife]

I'd like to know also. If anyone has 29gs laying around and some prop, it would make for a nice little experiment.

[Agent Smith]

why would you use a slin take forever to draw and inject. stop being a nancy and use a 23g 1inch pin LOL.

AS

[not2bigyet]

I have used a 29g 1/2" in my delts before, actually it was last night! The prop will go through it without a problem, just takes a little time (the slower the better anyway, right!). Your best bet is to use a 20g or similar size to draw, pull the plunger out of the slin and fill it that way...good luck!

[gixxer]

not2bigyet,thats the idea i had to fill them,but i was thinking they would be good for bi shots but didn't know how it would work with prop! so i'm good to go..

Thanks guys for the info

[not2bigyet]

not2bigyet,thats the idea i had to fill them,but i was thinking they would be good for bi shots but didn't know how it would work with prop! so i'm good to go..

Thanks guys for the info

Yeah, also good for the bi's...the prop is gunna hurt though!!

[KrashRoute]

I would watch out with injection volumes if you are only going .5" in. Not that slin pins hold over a ml. or anything.

[Cycleon]

I do it all the time - but its true I do jam it deep in there - works great if you have a thin enough prop to do it - of course dont draw with the same pin you shoot with

[markas214]

I use 22s and 23s all the time. Why would anyone even want to use a 29? It takes forever and the pain with a 22 or even a 21 isn't bad at all.

[Billy_Bathgate]

I use 22s and 23s all the time. Why would anyone even want to use a 29? It takes forever and the pain with a 22 or even a 21 isn't bad at all.

Cause 29 doenst take forever, you dont feel anything at all, less scar tissue

[Billy_Bathgate]

I have used a 29g 1/2" in my delts before, actually it was last night! The prop will go through it without a problem, just takes a little time (the slower the better anyway, right!). Your best bet is to use a 20g or similar size to draw, pull the plunger out of the slin and fill it that way...good luck!

Thats exactly how I do it.

I have used delts, bis, tris and quads with no problem.

I usually only use tren though for it, since its about all I shoot ED anyways.

[Swellin]

I do it all the time - but its true I do jam it deep in there - works great if you have a thin enough prop to do it - of course dont draw with the same pin you shoot with

I knew you wore a skirt Mary!

Actually, I have been bleeding so badly from all of my ED injects...and bruising so badly, that this is sounding pretty good to me.