Results 1 to 25 of 25
  1. #1
    tonyinnh is offline Junior Member
    Join Date
    Mar 2011
    Posts
    73

    Question how do you aspirate?? I tried tonight and couldn't suck anything back at all

    I pulled the plunger back and nothing came out,, the plunger just sprung back form the vacuum,, I read some get better reaction if the aspirate ... thanks,, tony


    i just found the answer,, i guess i did it right,,, suck it back a bit after and the push back in,, it was just suction...
    Last edited by tonyinnh; 03-18-2011 at 08:41 PM.

  2. #2
    zaggahamma's Avatar
    zaggahamma is offline Mr. Moderation
    Join Date
    Mar 2006
    Location
    Orlando
    Posts
    19,495
    yeh bro you should have seen a big air bubble appear but then disappear when u let go


    bubble-good

    blood-bad(if this...take needle out...never happened to me so actually I DONT KNOW WHAT TO DO..with the meds and blood if this happens)

  3. #3
    vtach12's Avatar
    vtach12 is offline Associate Member
    Join Date
    Dec 2010
    Location
    Dallas, Texas
    Posts
    285
    That is what you want, no blood. Blood means you are in a vein or have pierced one close on the way in. Also, aspirate slow because if you get blood, it will fill the syringe quickly. You can inject it all in another spot if it is a small amount, but it will be just that much more volume. And that will hurt more, otherwise waste/discard and start over.

  4. #4
    tonyinnh is offline Junior Member
    Join Date
    Mar 2011
    Posts
    73
    thank guys,, i did find it after i posted... funny my doctor and nurse NEVER told me to do this,,, glad i do research on anything that perscribed to me.... thank you!!

  5. #5
    zaggahamma's Avatar
    zaggahamma is offline Mr. Moderation
    Join Date
    Mar 2006
    Location
    Orlando
    Posts
    19,495
    Quote Originally Posted by tonyinnh View Post
    thank guys,, i did find it after i posted... funny my doctor and nurse NEVER told me to do this,,, glad i do research on anything that perscribed to me.... thank you!!
    i've seen and heard nurses dont aspirate and/or know wtf aspirating is...i asked a nurse with a needle in her hand before "what guage is that" and she was like u mean how long is the needle?

  6. #6
    tonyinnh is offline Junior Member
    Join Date
    Mar 2011
    Posts
    73
    what gauge needles are you using? i have 20 gauge 1 1/2 inches,, any my leg will have extreme pain for the second day.... i have tried both legs... on the top of my quad slightly to the out side.. about 10 inches to a foot up from my knee... the pain makes me limp for the whole day,, suck when im at work on my feet for 12 hours,,,,,

  7. #7
    zaggahamma's Avatar
    zaggahamma is offline Mr. Moderation
    Join Date
    Mar 2006
    Location
    Orlando
    Posts
    19,495
    Quote Originally Posted by tonyinnh View Post
    what gauge needles are you using? i have 20 gauge 1 1/2 inches,, any my leg will have extreme pain for the second day.... i have tried both legs... on the top of my quad slightly to the out side.. about 10 inches to a foot up from my knee... the pain makes me limp for the whole day,, suck when im at work on my feet for 12 hours,,,,,
    youre using too big o guage buddy....i believe guys do 25guage for quads and a lot do 23 for glutes...20 guage seems a bit harsh espeically trt being lifetime

  8. #8
    tonyinnh is offline Junior Member
    Join Date
    Mar 2011
    Posts
    73
    i'll ask for 25 gauge then.. it doesnt hurt when i do it or even after,, its like 12 hours after inj,, it feels like a massive charlie horse for about 24 hours,, then gone.... i thought the needle look big to me...

  9. #9
    The Toad's Avatar
    The Toad is offline Associate Member
    Join Date
    Oct 2010
    Location
    Colorado
    Posts
    240
    Try injecting slowly, actually the 25 ga. will help with this. Then massage the area real good afterward.

  10. #10
    tonyinnh is offline Junior Member
    Join Date
    Mar 2011
    Posts
    73
    toad,, i did and and i did.. I held pressure on it for a full minute too. like a specialist recommended.. it didnt hurt last night but today and right now,, holy hell!!

  11. #11
    Join Date
    Apr 2010
    Posts
    602
    I use a 25g, 1 inch. It takes quite a bit longer to draw from the vial. Just be patient, it's worth it. Some people draw with a larger gauge and pin with the 25g, but I found it to be a pain in the arse and just use the same for both.

    1.5 inch is pretty long too and that may not help either. You may be sticking it in too far. Even with a 1 inch needle, I usually leave about a 1/4 inch showing. I've been injecting over a year now and I don't even feel it anymore. Even going in I barely feel it. Once in a blue moon my quad may be a *little* soar the next day, but pretty rarely.

    Best of luck.

  12. #12
    pyramid is offline Junior Member
    Join Date
    Oct 2010
    Posts
    103
    I keep 18ga needles to draw with and switch the needle to a 23 or 25ga for injection, this speeds up the process tremondously and you will find if you inject with a brand new needle meaning you did not use it to draw with, the rubber in the bottle can dull the needle. The process is alot faster and less painful. Hope this helps..

  13. #13
    tonyinnh is offline Junior Member
    Join Date
    Mar 2011
    Posts
    73
    Quote Originally Posted by forrest_and_trees View Post
    I use a 25g, 1 inch. It takes quite a bit longer to draw from the vial. Just be patient, it's worth it. Some people draw with a larger gauge and pin with the 25g, but I found it to be a pain in the arse and just use the same for both.

    1.5 inch is pretty long too and that may not help either. You may be sticking it in too far. Even with a 1 inch needle, I usually leave about a 1/4 inch showing. I've been injecting over a year now and I don't even feel it anymore. Even going in I barely feel it. Once in a blue moon my quad may be a *little* soar the next day, but pretty rarely.

    Best of luck.
    i agree,, i will ask for 25g 1 inch... i think they gave me a script for glutes,, not leg... even though they taught me for my leg,, lol..

  14. #14
    tonyinnh is offline Junior Member
    Join Date
    Mar 2011
    Posts
    73
    Quote Originally Posted by pyramid View Post
    I keep 18ga needles to draw with and switch the needle to a 23 or 25ga for injection, this speeds up the process tremondously and you will find if you inject with a brand new needle meaning you did not use it to draw with, the rubber in the bottle can dull the needle. The process is alot faster and less painful. Hope this helps..
    i do switch needles.. it doesnt even hurt when i do it its 12 hours after,, i did it last at 8pm friday,, and my leg is still sore now at 8 pm sunday... not cool... i will ask for smaller though,, thanks!!!

  15. #15
    tonyinnh is offline Junior Member
    Join Date
    Mar 2011
    Posts
    73
    Quote Originally Posted by pyramid View Post
    I keep 18ga needles to draw with and switch the needle to a 23 or 25ga for injection, this speeds up the process tremondously and you will find if you inject with a brand new needle meaning you did not use it to draw with, the rubber in the bottle can dull the needle. The process is alot faster and less painful. Hope this helps..
    i do switch needles.. it doesnt even hurt when i do it,,, its about 12 hours after,, i did it last at 8pm friday,, and my leg is still a little sore now at 8 pm sunday... not cool... i will ask for smaller though,, thanks!!!

  16. #16
    sirupate is offline Member
    Join Date
    Jun 2010
    Posts
    791
    Quote Originally Posted by tonyinnh View Post
    what gauge needles are you using? i have 20 gauge 1 1/2 inches,, any my leg will have extreme pain for the second day.... i have tried both legs... on the top of my quad slightly to the out side.. about 10 inches to a foot up from my knee... the pain makes me limp for the whole day,, suck when im at work on my feet for 12 hours,,,,,
    I'm injecting in my quads with a 23g1, but drawing into the barrel with an 18G1, then switching needles. The 23G doesn't seem painful to me. Maybe I should try a 25G sometime. My injection sites are somewhat painful for up to 48 hours afterward...right now injecting a full ml of test.cyp.

    Jeff

  17. #17
    bass's Avatar
    bass is offline HRT Specialist ~ Knowledgeable Member
    Join Date
    Mar 2009
    Location
    In Southern Commiefornia
    Posts
    9,357
    my clinic coordinator said he never aspirates! most of the time i forget to aspirate and so far no problem. the first few shot i got sore for few days, but now no more soreness! i draw with 20g and inject with 23gx1.5". my new vial of test is with grape oil which is much thinner than other oils, it goes in much quicker!

  18. #18
    THORSZ's Avatar
    THORSZ is offline Member
    Join Date
    May 2002
    Posts
    716
    Blog Entries
    1
    My doctor never taught me to aspirate too. I always hit the glutes and couldn't see anyway, but after two years I hit a vein. I was on the floor coughing with snot running out on my nose. I felt like crap for about 30 minutes. I have been hitting the quads ever since so I can aspirate. I use a 23 gauge 1 inch needle, but I suppose a smaller gauge would work.

  19. #19
    bass's Avatar
    bass is offline HRT Specialist ~ Knowledgeable Member
    Join Date
    Mar 2009
    Location
    In Southern Commiefornia
    Posts
    9,357
    Quote Originally Posted by THORSZ View Post
    My doctor never taught me to aspirate too. I always hit the glutes and couldn't see anyway, but after two years I hit a vein. I was on the floor coughing with snot running out on my nose. I felt like crap for about 30 minutes. I have been hitting the quads ever since so I can aspirate. I use a 23 gauge 1 inch needle, but I suppose a smaller gauge would work.
    LMAO! i fell on the floor reading your post, no snot coming out of my nose though!

  20. #20
    APIs's Avatar
    APIs is offline Knowledgeable Member
    Join Date
    Sep 2010
    Location
    Avoiding newbies @ gym...
    Posts
    1,322
    Quote Originally Posted by THORSZ View Post
    My doctor never taught me to aspirate too. I always hit the glutes and couldn't see anyway, but after two years I hit a vein. I was on the floor coughing with snot running out on my nose. I felt like crap for about 30 minutes. I have been hitting the quads ever since so I can aspirate. I use a 23 gauge 1 inch needle, but I suppose a smaller gauge would work.
    Wow, no shiat? I've never aspirated, but I always do delt shots. Maybe I should start after hearing this?

  21. #21
    zaggahamma's Avatar
    zaggahamma is offline Mr. Moderation
    Join Date
    Mar 2006
    Location
    Orlando
    Posts
    19,495
    this is why it is taught to aspirate ...so what if its rare to hit a vein...wtf not just take 3 seconds to be safe

  22. #22
    tonyinnh is offline Junior Member
    Join Date
    Mar 2011
    Posts
    73
    thanks for all your feedback! dang thorsz.. that isn't cool.. im glad your ok....

  23. #23
    Join Date
    Dec 2010
    Location
    South Fla
    Posts
    4,724
    I hit my glutes as well and never pulled the plunger back...my MD never said to do so for whatever reason. Nevertheless, the glutes probably have the least chance of hitting a vein but it still can happen. It's hard enough to reach around to hit your butt with the syringe let alone pull the plunger back.

    But like JPKman states; what's 3 seconds???

    I am pulling that plunger back from now on!

  24. #24
    pyramid is offline Junior Member
    Join Date
    Oct 2010
    Posts
    103
    Quote Originally Posted by tonyinnh View Post
    toad,, i did and and i did.. I held pressure on it for a full minute too. like a specialist recommended.. it didnt hurt last night but today and right now,, holy hell!!
    Are you using US made human grade stuff? When I used to cycle I used mexican vet grade test and deca and I would always get the moderate to severe soreness but with human grade stuff no soreness at all.

  25. #25
    sirupate is offline Member
    Join Date
    Jun 2010
    Posts
    791
    Quote Originally Posted by pyramid View Post
    Are you using US made human grade stuff? When I used to cycle I used mexican vet grade test and deca and I would always get the moderate to severe soreness but with human grade stuff no soreness at all.
    Hay...my test. cyp. was prescribed by my doctor and obtained from a recognized pharmacy and I have been sore the last two injections, so I don't know if that makes much of a difference. Probably more of a difference in how much is injected and where it is injected.

    sirp

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •