Problem loading hgh

[TRYER]

Im having a problem dividing my gh into 2, my vials have 8iu of growth in and i am taking 4iu ed so i withdrawn 1ml of bac water and slowly release it into the vial then with an insulin pin i withdawn 0.5mil which should leave me with 0.5mil still in vial so when i withdrawn into a 2nd insulin pin i should have 0.5mil in this one too but it always comes out at between 0.3 to 0.4.

can someone please help me as i dont understand what im doing wrong ive done 6 vials now and no 2 insulin pins have come out equal at 0.5 each

thanks and all help is appreciated.

[TRYER]

bump

[j4ever41]

bro only thing i can think of is make sure you are putting a full 1 ml in when you reconstitute and there is not any air in your syringe,i have 8iu in and take 4iu each time and use .50 ml to reconstitute mine always comes out even if there is a difference it is very very small.

[TRYER]

j4 its doin my head in i have done 6 vials now and been as careful as poss and i just cant get it right, when i draw out the bac water to the 1ml point is it 1ml including whats in the pin end too

[j4ever41]

lol,maybe someone else will have an idea,make sure when you pull syringe out that you are not losing any thru the puncture hole in stopper.

[The Deuce]

This is something that is confusing me, You got your SLIN pin.. you pull out your GH.. then.. what you use the same slin pin you drew with to inject with?? SINCE you can't change the tips.. How's that work??

And as far as You issue.. ARE YOU SURE YOU ARE DRAWING OUT EVERY TINY BIT ?? I notice that when I get to the bottom of a vial of Test or something I pull everything off and get right into it to make sure I grab EVERY LAST DROP of oil in the Vial.. Maybe that's what You need to do... Ya know what I mean??

[taba]

From what I'm reading the OP is drawing up BW with a different pin and then using a slin pin to draw for the injection. If this is so, why don't u just use a slin pin and draw up the amount you need. Its more accurate.

If you don't have too many slin pins,
Keep the pin in the vial after you put all the bw in and draw all of it back up. Read your slin pin tics make sure you didn't take your pin out of the vial yet while doing so, then squirt half back in the vial.
This way you keep the pin from being used too much.

If you want, you can use an old slin pin for the adding your solution, then the new pin will be used just to draw up and inject gh. I usually do it this way so my pin is sharper for injection. Some ppl use a slin pin for 3 injections. I use once, twice if I get low on pins.

[higherdesire]

It is impossible to put in 1ml and draw out less. You need to reconsider what you are doing when you are measuring the BW to begin with. If it is the exact same on all 6 vials bro then the answer is quite obvious you need to put in a little more BW. ever hear the old addage that if you keep doing what youve always done then you will keep gettin what youve always gotten? apply that here. If you need more then use more. OR if you are drawing the same amount out each time then split it differently because the concentration is the same in both pins, so draw them both and split it evenly. I draw all of mine a week in advance and keep them in the fridge in a bag. Good luck.

[The Deuce]

From what I'm reading the OP is drawing up BW with a different pin and then using a slin pin to draw for the injection. If this is so, why don't u just use a slin pin and draw up the amount you need. Its more accurate.

If you don't have too many slin pins,
Keep the pin in the vial after you put all the bw in and draw all of it back up. Read your slin pin tics make sure you didn't take your pin out of the vial yet while doing so, then squirt half back in the vial.
This way you keep the pin from being used too much.

If you want, you can use an old slin pin for the adding your solution, then the new pin will be used just to draw up and inject gh. I usually do it this way so my pin is sharper for injection. Some ppl use a slin pin for 3 injections. I use once, twice if I get low on pins.

I'm still confused here... YOU USE THE SAME EXACT Slin Pin to draw out the GH ... say I am drawing 2iu's so I draw up to 2 ticks on the slin pin.. if I mixed it with 1ml.. regardless of the numbers.. I draw the gh up into the slin pin.. remove said pin from vial... alcohol swab where I am going to inject (whether it's sub-q or IM) and stick the slin pin into my body [THE SAME ONE I JUST DREW WITH] AND inject the GH into my body...

That's how to administer this stuff... just like that??

[Someguy123]

I'm still confused here... YOU USE THE SAME EXACT Slin Pin to draw out the GH ... say I am drawing 2iu's so I draw up to 2 ticks on the slin pin.. if I mixed it with 1ml.. regardless of the numbers.. I draw the gh up into the slin pin.. remove said pin from vial... alcohol swab where I am going to inject (whether it's sub-q or IM) and stick the slin pin into my body [THE SAME ONE I JUST DREW WITH] AND inject the GH into my body...

That's how to administer this stuff... just like that??

yes, thats how you do it. what are you confused about??


to the OP. it sounds pretty simple, whats going on here. you put 1ml of BW in your vial. but when you draw out of the vial, there is GH in the tip of the pin. which isnt accounted for. so when you draw your second shot, you would have slightly less than 1/2ml in the vial.

that is the only way this could happen. but it seems like you are missing a lot, considering how small the pin tip is, on an insulin needle. but the amount of solution left in your pin tip, plus the minimal amount left in the vial that you cant get out. i suppose its possible.

[The Deuce]

You ever seen a needle after it's been used before.. like stuck into something... dull.. we are talking DULL-NESS here... that's what i am confused about...

[peteroy01]

You ever seen a needle after it's been used before.. like stuck into something... dull.. we are talking DULL-NESS here... that's what i am confused about...

yes, you use the same pin. if you cant handle a slin pin after 1 draw then you need to grow some nutz. sorry dude but damn! its not an 18g stick. its tiny. yes you may dull it with the 1 stick into the stopper but its not bad at all. there is no way to change pins(at least the ones ive seen). anyways, to the op. are you pulling the pin out of the vial where only the tip of the needle is in the vial(so you can get to the very bottom)? i have 8iu vials as well and when i reconstitute i always put in .82(thats to the #8 and 1 tiny hash) cause a little will be left in there that cant be taken out. hope that helps.

[TRYER]

I have insulin barrells that have no pin fixed to it and i use a green pin to draw bw and mix with gh then i load the barrell still using the green and once loaded i change pin to an orange one which is same size as insulin pin

[TRYER]

ive come to the conclusion that i dont have to load 2 seperate pins from the 8iu vial i will just mix 1ml bw into a slin and whatever it reads i will inject half change the pin and inject the rest the next morning.
does anyone think this a bad idea?

[TRYER]

bump