hgh mixing

**soccerlife77** · 04-13-2011, 05:42 AM

Hi all, So I went to mix for the first time last night and when I went to put the water into the vial the water shot right in like there was no tomorrow. I was told to put the water in gently along the vial wall so it would not damage the gh. What would be the best way to inject the water without it shooting into the vial?

**marcus300** · 04-13-2011, 05:49 AM

You want to direct the needle so it touches the side of the vial and slowly push the water into the vial. It needs to run down the vial slowly onto the powder cake otherwise you can damage the hgh. Once the water is in the vial slowly swirl so the water dissolves all the powder.

**soccerlife77** · 04-13-2011, 06:00 AM

thats what I was trying to do, but when i put the needle in the vial the water rushed in like it was being sucked in by a vacuum. Is there a reason why it shot in like that?

**marcus300** · 04-13-2011, 06:14 AM

Vacuum would of sucked it into the vial, you need to hold the plunger and direct the water down the side so it runs onto the powder cake otherwise you destroy it, its a very sensitive hormone.

**soccerlife77** · 04-13-2011, 07:39 AM

thanks for the info Marcus!

**ScotchGuard02** · 04-13-2011, 08:07 PM

Don't worry bro. I did the same thing for a while until I figured it out.

**joeyzaza** · 04-17-2011, 07:04 AM

exactly the same thing happened to me- ,never posted here only read, but should you remove 1 or 2 units of air first or just hold plunger preventing the water to be sucked in? thanks..

**wmaousley** · 04-17-2011, 11:46 PM

When something is under pressure its best to equalize the pressure inside before adding Bact Water IMO

**M302_Imola** · 04-18-2011, 06:11 AM

Originally Posted by wmaousley

When something is under pressure its best to equalize the pressure inside before adding Bact Water IMO

makes since so how is this accomplished?

**DCannon** · 04-18-2011, 08:50 AM

Originally Posted by M302_Imola

makes since so how is this accomplished?

Just add some air to the vial.

**M302_Imola** · 04-18-2011, 01:23 PM

Originally Posted by DCannon

Just add some air to the vial.

Thanks...easy enough!

**38jumper38** · 04-18-2011, 08:06 PM

1- you need to have the hgh vial and bac water in the frigged for few days so they will reach some temperature, different temperature will destroy hgh.
2- put a needle in the vial, let some air in. vials are vacuo seal.
3- put the bac water in to the vial, make sure you keep the vial side ways, so the bac will get in the glass and drift down to the hgh.
4- after done make sure you roll the vial side ways very slow, never ever shake.
5- always ad 0,5cc extra of bac water, you will loose when you mixed.
6- after mixed, keep in the frigged.

**lovbyts** · 04-19-2011, 12:39 AM

Originally Posted by 38jumper38

1- you need to have the hgh vial and bac water in the frigged for few days so they will reach some temperature, different temperature will destroy hgh.
2- put a needle in the vial, let some air in. vials are vacuo seal.
3- put the bac water in to the vial, make sure you keep the vial side ways, so the bac will get in the glass and drift down to the hgh.
4- after done make sure you roll the vial side ways very slow, never ever shake.
5- always ad 0,5cc extra of bac water, you will loose when you mixed.
6- after mixed, keep in the frigged.

Good advice, I never though about that. I always did it but never though about it. Got lucky.

Also, when considering how it is fragile and you dont want to shake it think about the same when injecting it, do you really want to just blast it in like most people do or take your time so you dont destroy all your had work up to this point.

**M302_Imola** · 04-19-2011, 10:25 AM

Originally Posted by 38jumper38

1- you need to have the hgh vial and bac water in the frigged for few days so they will reach some temperature, different temperature will destroy hgh.
2- put a needle in the vial, let some air in. vials are vacuo seal.
3- put the bac water in to the vial, make sure you keep the vial side ways, so the bac will get in the glass and drift down to the hgh.
4- after done make sure you roll the vial side ways very slow, never ever shake.
5- always ad 0,5cc extra of bac water, you will loose when you mixed.
6- after mixed, keep in the frigged.

Can you please explain the bold more in detail...thanks

**DCannon** · 04-19-2011, 11:51 AM

Originally Posted by M302_Imola

Can you please explain the bold more in detail...thanks

That doesn't make sense to me either.

**38jumper38** · 04-19-2011, 05:10 PM

if you put 5cc in the vial and draw back right away you only have 4,5cc.
Just try you will see.
I was adding 5cc in the vial(8ui) and shotting 2,5cc(4ui), but my second dose only come out 2cc, I call my doc and he say I forgot to tell you, always add 0,5cc extra.