What kind of car do you drive?

[iNvid]

****delete

[ttuPrincess]

toyota 4 runner.. Pretty little thing..

[Blown_SC]

Take a wild guess ...

For those of you whom ride the short bus, I drive a Ford Thunderbird SC...

[Krunchtime]

dodge pick up. lifted

[Blown_SC]

dodge pick up. lifted

Why was Mopar not even included in the poll?

[butterface]

Bmw, Honda Convertible and a Minivan

[Elliot]

www.mta.info click on nyc subway..

[Juggernaut]

Mine is pretty special....I bought it from a guy who used to be in the circus. It's pretty freakin small but I'll be **** if I can't fit about 23 of my friends in it! Just to make a little more room I drive with both feet hanging out the window....one of my other buddies works the brakes and gas. hahahahahaahahahahahahaha

[butterface]

Mine is pretty special....I bought it from a guy who used to be in the circus. It's pretty freakin small but I'll be **** if I can't fit about 23 of my friends in it! Just to make a little more room I drive with both feet hanging out the window....one of my other buddies works the brakes and gas. hahahahahaahahahahahahaha

Yeah I laugh at my own jokes that make no sense too

[Spoon]

mitsubishi pajero, misubishi lancer evo 5

[H-BOL]

where is my HONDA!!!!!!!!!!!!!!!!!

[Juggernaut]

Yeah I laugh at my own jokes that make no sense too

Sorry....thought most would pick up on the fact it's a clown's car.

[Testsubject]

'99 Honda civic SIR, tuned to the nuts accept for a turbo. Im selling it soon though its getting to small for me its getting to hard to get in and out of, Ill be buying a truck soon and Ill probably put 26 Lexani chromes on it, and tune the motor.

[LM1332]

Well i chose ford since they are the guys who make towncars

[ironfist]

Ford truck and BMW 3 series

[Blown_SC]

Ford truck and BMW 3 series

I like you...


----------------
Juggy - I got your joke ...
---------------------
Testsubject - Let me know if you need anything for your truck, I can usually hook people up through Summit Racing, Jeg's, and Scoggin-Dickey Parts Center... Lexani's are also very nice, I like Mass' on the Caddy...

[priest_416]

I drive a trailblazer,but I am getting a 2004 BMW M3 Ill be pretty broke once I get it

[Maraxus]

Ive got a WS6, and a Tahoe.

[majorpecs]

2001 Ford F250 Powerstroke...12" lift, 37" BFG tires, Weld Racing Rims, 4" exhaust, Perf. chip, Ram air intake....

[butterface]

M3 yes!!!!!!! What a sweet car. If youre buying a new one i'd wait a year bro. They are about to get played out in a second. The bodystyle is 7 years old and a new one is about to come out and will be basically the same price. You dont wannt be the guy who paid 60K for a car thats gonna be played out very very soon.


Anyone here have the new honda accord coupe?

[TheMudMan]

2003 Chevy Avalanche, 1972 Pontiac GTO (mostly 1/4 mile track driven)

[NoobJuice]

did it work

[NoobJuice]

[Spoon]

I drive a trailblazer,but I am getting a 2004 BMW M3 Ill be pretty broke once I get it

nice choice!

[hercules88]

i have a jeep wrangler with a 6 inch lift and 35" tires for cali and a 300 e benz for chicago.

[Blown_SC]

2003 Chevy Avalanche, 1972 Pontiac GTO (mostly 1/4 mile track driven)

What's under the hood bro?
-------------------------
Nice rides everyone, especially the WS6 and the lifted Ford...

[MachZ]

2004 GMC Envoy, 2001 GMC 4X4 Truck.

[TheMudMan]

What's under the hood bro?
-------------------------
Nice rides everyone, especially the WS6 and the lifted Ford...

400, RAM AIR IV cam, D-port heads, edlebrock intake, Holly 750 Double Pumper, Hedman Headers Dragsters.........

[Blown_SC]

400, RAM AIR IV cam, D-port heads, edlebrock intake, Holly 750 Double Pumper, Hedman Headers Dragsters.........

Is it a Pontiac 400? Any numbers to share? (hp, torque, elapsed time)...
What tranny ru using...powerglide? TH-400/350? Muncie?

[nickrizz]

Honda Civic

[TheMudMan]

Is it a Pontiac 400? Any numbers to share? (hp, torque, elapsed time)...
What tranny ru using...powerglide? TH-400/350? Muncie?

Yes it's a 400 from a 68 GTO

HP is a little over 400, TH-400 w/ B&M Shift Kit, 3800 Stall Speed Converter, 4:10 10bolt rear........ will be replacing the rear with a full spool, axels, and c-clip elimanators........ best run on slicks is 11.96......... consistant low 12's

it's pretty much stock and it's a 3700lb car so I'm happy with the numbers........ Eventually I would like to take a crank from a 455 and re do the motor...... Hopeing for High 10's low 11's

[Juggernaut]

2001 Ford F250 Powerstroke...12" lift, 37" BFG tires, Weld Racing Rims, 4" exhaust, Perf. chip, Ram air intake....

Well next to Major here I might as well be driving a clown car! Show off! Hahahaha I drive a 2002 Ford sport 4x4 (Red like Major, he's my hero). Also I have a 73' Capric Classic and 68' convertiable Corvette....my project car.

[nickrizz]

i had a piece of crap 86 blazer with no air condition

[TheMudMan]

Well next to Major here I might as well be driving a clown car! Show off! Hahahaha I drive a 2002 Ford sport 4x4 (Red like Major, he's my hero). Also I have a 73' Capric Classic and 68' convertiable Corvette....my project car.

68 Vett is one of my favorite years

[NoobJuice]

68 Vett is one of my favorite years

Last year with fiberglass? MMMmmmm Stingrays are the shiznitbamsnitabomb!!!!!!!!!!!!

[Blown_SC]

Yes it's a 400 from a 68 GTO

HP is a little over 400, TH-400 w/ B&M Shift Kit, 3800 Stall Speed Converter, 4:10 10bolt rear........ will be replacing the rear with a full spool, axels, and c-clip elimanators........ best run on slicks is 11.96......... consistant low 12's

it's pretty much stock and it's a 3700lb car so I'm happy with the numbers........ Eventually I would like to take a crank from a 455 and re do the motor...... Hopeing for High 10's low 11's

Nice bro...
Those are some impressive times for a lil over 400 hp...and 3700lbs...
That rear must really bite...

The longer stroke/extra inches will be an awesome addition to raise the low-end torque, and will help 'motivate' the old Goat a lil more ...
Do u ever drive it on the street? If so, a car running 10s/ low 11s on the street is a rarity....especially without running

[kc]

04 Mazda RX-8 but when it's snowin or icy, 03 GMC 1/2 ton or if its nice out, 04 Suzuki Marauder

[TheMudMan]

Nice bro...
Those are some impressive times for a lil over 400 hp...and 3700lbs...
That rear must really bite...

The longer stroke/extra inches will be an awesome addition to raise the low-end torque, and will help 'motivate' the old Goat a lil more ...
Do u ever drive it on the street? If so, a car running 10s/ low 11s on the street is a rarity....especially without running

Thanks........ It's not my doing....... My buddy got the car to run this way..... he has been working in his father's shop since he was 13 and he loves Pontiacs.... He has a high 10 second 68 GTO running a 400 no NOS and not blown. It's all in the setup....... big motors, rears....... mean nothing if they aren't matched corectly

I use to drive it on the street a few years ago but it doesn't run well on pump gas....... pings bad. I was thinking of putting it on the street this summer before I put the spool in it....... after the spool is in it will not be streetable (too much hop around corners)

Pontiac's are torqie enough so it will be sick after the new crank and the motor is re-done....... I just have to save up the $$$$$$ to do it.

[decadbal]

2002 tahoe.... big pimpin baby, brush guard for those asses whom i am forced to ram

[Blown_SC]

Thanks........ It's not my doing....... My buddy got the car to run this way..... he has been working in his father's shop since he was 13 and he loves Pontiacs.... He has a high 10 second 68 GTO running a 400 no NOS and not blown. It's all in the setup....... big motors, rears....... mean nothing if they aren't matched corectly

I use to drive it on the street a few years ago but it doesn't run well on pump gas....... pings bad. I was thinking of putting it on the street this summer before I put the spool in it....... after the spool is in it will not be streetable (too much hop around corners)

Pontiac's are torqie enough so it will be sick after the new crank and the motor is re-done....... I just have to save up the $$$$$$ to do it.

Believe me I hear ya...
We ran a 27 ford roadster with a 496, N/A, and made over 800 hp......ran a 5.50 in the 1/8th..
What is the compression ratio? 11:1? My truck's 355 is 10.4 with iron Vortec heads, and barely gets by detonation on 94 octane... lol...
Come on now, don't you love spools on the street? Seemingly not much better than a welded rear ...