Pin Size for Test prop ED

[RAM2500]

What size pins do you use for ED Test Prop shots, I start a cycle of prop in October and was wondering if you can use real small pins like 28 or 29 gauge 3/4 inch long.

[RAM2500]

Oh, one more thing.. 75mg is about .3cc, I would guess you use a 1cc syringe?

[promiscio]

.3=75mg? What kind of test prop?

Anyways, I wouldnt use smaller than 27G. I use either 25G or 27G. The 27G takes forever to inject though.

[RAM2500]

Im using Aries Lab Test Prop 250... 250mg devided by 75mg = .3

[promiscio]

Gotcha

[man_of_steel11]

What size pins do you use for ED Test Prop shots, I start a cycle of prop in October and was wondering if you can use real small pins like 28 or 29 gauge 3/4 inch long.

not likely buddy...your gonna have to use 23 or 25 and 1 inch-1.5 inch. and go eod unless you want to look like a fat pig...

[RAM2500]

Prop must be shot everyday! thats a fact.

[man_of_steel11]

Prop must be shot everyday! thats a fact.

haha, according to who?

What is of note with propionate, is that users have successfully incorporated it into cutting cycles as well. Especially people who tend to lose a lot of mass normally during extreme diet phases find this useful. By injecting every two or three days and using only 50-75 mg each time, no notable water builds up (or at least none that can't be fixed with proviron, arimidex or winstrol) and no fat is deposited, thus allowing a user to stay relatively lean. So this type of testosterone can be used to keep gaining or retaining mass until 2-3 weeks out of contest time with relatively little difficulty. Although most will choose to add Proviron (50-100 mg/day) out of precaution. Its best use is of course still in bulking phases to pack on mass. Testosterone is not the king of the hill of all mass-builders for nothing.

[RAM2500]

Ask around, Ive posted my new cycle on this board 3 times and all 3 times I was told by MANY senior members that prop MUST be shot every day. just what I was told. Im new.

[KeyMastur]

ED or EOD

[RAM2500]

I was wrong I guess.

[KeyMastur]

I was wrong I guess.

but most shoot ED

[RAM2500]

but most shoot ED

Keymastur if you were doing a cycle of Test E, Deca and Jump starting it with prop for the first 4 weeks would you do ED injections of prop.

[KeyMastur]

Keymastur if you were doing a cycle of Test E, Deca and Jump starting it with prop for the first 4 weeks would you do ED injections of prop.

of course.

i'm about to run a test prop / fina / somethin else for 8 weeks shooting ED.

[RAM2500]

of course.

i'm about to run a test prop / fina / somethin else for 8 weeks shooting ED.

last question on this.. Im going to be shooting Deca and Prop together , Prop and Test E together and was hopeing to do it all in one injection. The prop will be about .3cc and the Test E will be 1.5cc. Is it hard to put 2 different types of gear in one syringe. Lastly Ive searched to well known sites for somthing smaller than a 3cc syringe, no luck. Any chance you can help with this in a PM?

[KeyMastur]

No, it's ok to mix the two. Might even ease the pain of the prop if there is any. I wouldn't go more than 3 cc's into the glute or quad though.

slin pins are usually only 1 cc in volume. but wouldn't think it would be worth it.

[shorty2big]

i use 1/2 slin needles for everything oil based and just hit the delt or quad. Works fine for me.
S2B

[not2bigyet]

i use 1/2 slin needles for everything oil based and just hit the delt or quad. Works fine for me.
S2B

agreed! the only problem is the time it takes to inject...