Results 1 to 34 of 34

Thread: drawing 2 steroids in the same syringe?

  1. #1

    drawing 2 steroids in the same syringe?

    I heard this can be done but how would you be able to draw air into the second compound? for example, first you draw test, then switch the needle and try to draw deca. However, obviously you can release air in there or else the test will go into the deca vial. Is there a strategy to this?

  2. #2
    Join Date
    Jan 2009
    Location
    ELM STREET
    Posts
    2,222
    pull back the 1st compound to the 2cc mark or higher, then push the 1cc+, or however much you do, of air into the 2nd compounds vial. easy

  3. #3
    Join Date
    Dec 2009
    Location
    Toronto
    Posts
    76
    Just for some clarity... under what specific circumstance would you want to draw from two compounds in the same syringe? Obviously to mix the two, and im guessing to save having to poke twice in the flesh, but isnt there a significant danger in mixing compounds like that?

  4. #4
    Join Date
    Jan 2009
    Location
    ELM STREET
    Posts
    2,222
    no there is no danger what so ever in doing that

  5. #5
    Quote Originally Posted by funone32 View Post
    Just for some clarity... under what specific circumstance would you want to draw from two compounds in the same syringe? Obviously to mix the two, and im guessing to save having to poke twice in the flesh, but isnt there a significant danger in mixing compounds like that?
    so I wouldn't have to pin twice. everyone seems to do this here. you'll see if you run a search. I don't see why there would be any danger. They are all going to the same place anyways

  6. #6
    Join Date
    Jan 2009
    Posts
    1,728
    Yeah no danger doing that its the smart way to do it.

  7. #7
    Join Date
    Dec 2008
    Location
    Immortality
    Posts
    3,824
    Quote Originally Posted by gymnerd View Post
    Yeah no danger doing that its the smart way to do it.
    Yeah I am too stupid to do that way, I still pin twice

  8. #8
    Join Date
    Mar 2009
    Posts
    1,294
    sustanon 250 is a mixture of 4 tests. Just like drawing the 4 tests into one syringe. Works great.

  9. #9
    Join Date
    Mar 2009
    Location
    Detriot
    Posts
    2,289
    Quote Originally Posted by funone32 View Post
    Just for some clarity... under what specific circumstance would you want to draw from two compounds in the same syringe? Obviously to mix the two, and im guessing to save having to poke twice in the flesh, but isnt there a significant danger in mixing compounds like that?
    The 2 compounds pass each other in the bloodstream and the rest of the body . You think they'll break out into a fight when next to each other in the syringe ?

    You don't have to inject air into any vial to remove substance . It just comes out easier . The air will be sucked in at needle penetrated area . That is the same air you draw by holding syringe up in the air .

  10. #10
    dec11's Avatar
    dec11 is offline 'everything louder than everything else'
    Join Date
    Jan 2009
    Location
    *no sources i wont reply*
    Posts
    14,140
    Quote Originally Posted by funone32 View Post
    Just for some clarity... under what specific circumstance would you want to draw from two compounds in the same syringe? Obviously to mix the two, and im guessing to save having to poke twice in the flesh, but isnt there a significant danger in mixing compounds like that?
    its absolutly perfectly fine to do this, cuts down on jabs needed. i even mix hcg shots with test shots

  11. #11
    Join Date
    Dec 2009
    Location
    UK,Birmingham
    Posts
    218
    yes its safe to mix

  12. #12
    Can't you just push air into both vials then draw from vial 1 then vial 2? Afterwards change the needle and inject?

  13. #13
    dec11's Avatar
    dec11 is offline 'everything louder than everything else'
    Join Date
    Jan 2009
    Location
    *no sources i wont reply*
    Posts
    14,140
    i dont get the need for pushing air into a vial? i just insert needle and draw out compound

  14. #14
    Join Date
    Sep 2006
    Location
    socal
    Posts
    545
    Quote Originally Posted by declan11 View Post
    i dont get the need for pushing air into a vial? i just insert needle and draw out compound
    keeps pressure in the vial the same as outside the vial. makes its easier to draw as you dont have a vacuum in your vial.

  15. #15
    Join Date
    Mar 2007
    Location
    AUSTRALIA FTW!
    Posts
    604
    its only really useful if u have under 3cc's to put in (glutes, maybe quads if ya go deep enough and legs r big) any more and u should b using 2 sites anyway

  16. #16
    Join Date
    Apr 2009
    Location
    Here
    Posts
    1,799
    Quote Originally Posted by Dont wanna be old View Post
    The 2 compounds pass each other in the bloodstream and the rest of the body . You think they'll break out into a fight when next to each other in the syringe ?

    You don't have to inject air into any vial to remove substance . It just comes out easier . The air will be sucked in at needle penetrated area . That is the same air you draw by holding syringe up in the air .
    LMAO, this kills me.

  17. #17
    Join Date
    Aug 2009
    Location
    nc triangle
    Posts
    463
    I would never mix water based with oil based. I did this once and the oil base crashed immediately. I did not realize it until I injected about .2ml and the needle jammed. Followed by the most pain of anything ever ever. Broken glass injection.. ow.

    BUT mixing oil based compounds actually seems to reduce pain. I mix tne with tren and it reduces pain by alot. I still poke myself twice sometimes because depending on the site, 1.5 - 2ml still is painful because test base can be a bitch.

  18. #18
    Join Date
    Sep 2009
    Posts
    1,939
    I do this all the time but for the 2nd vial I don't push air into it. I just pull.

  19. #19
    Join Date
    Mar 2009
    Location
    R.I.P T-MOS
    Posts
    24,491
    Quote Originally Posted by elfin1mf View Post
    I would never mix water based with oil based. I did this once and the oil base crashed immediately. I did not realize it until I injected about .2ml and the needle jammed. Followed by the most pain of anything ever ever. Broken glass injection.. ow.

    BUT mixing oil based compounds actually seems to reduce pain. I mix tne with tren and it reduces pain by alot. I still poke myself twice sometimes because depending on the site, 1.5 - 2ml still is painful because test base can be a bitch.
    I've mixed oil and water based many times with no problems at all

  20. #20
    Join Date
    Sep 2008
    Posts
    367
    Quote Originally Posted by elfin1mf View Post

    BUT mixing oil based compounds actually seems to reduce pain. I mix tne with tren and it reduces pain by alot. I still poke myself twice sometimes because depending on the site, 1.5 - 2ml still is painful because test base can be a bitch.
    Depends on how its made. If the test is made with EO(ethyl olate) it should have very little pain or none. Some people are more sensitive than others. I can run 2ccs of prop at 100mg/ml and have no problems..

  21. #21
    Quote Originally Posted by tballz View Post
    I do this all the time but for the 2nd vial I don't push air into it. I just pull.
    That's what I used to do to, till the second vial started to suck down the juice. I always put air in both vials first then pull to the proper mark. Just make sure both vials are clean with alcohol first as you would do anyway.

  22. #22
    Join Date
    Feb 2022
    Location
    connecticut
    Posts
    15
    it is very safe to mix 2. compounds in the same needle just make sure they are both oil base ,if using water base make sure both are water base. do not mix a water base compound with an oil base compound in the same needle. you can take a water base and an oil base compound by 2 different needles you have to stick your self twice they both will work together in your body.

  23. #23
    Join Date
    Apr 2009
    Location
    The Dude Abides
    Posts
    10,976
    Quote Originally Posted by rampage1 View Post
    it is very safe to mix 2. compounds in the same needle just make sure they are both oil base ,if using water base make sure both are water base. do not mix a water base compound with an oil base compound in the same needle. you can take a water base and an oil base compound by 2 different needles you have to stick your self twice they both will work together in your body.
    You're replying to a thread that's 12 years old.

  24. #24
    Join Date
    Aug 2008
    Location
    La Cocina
    Posts
    4,119
    “Only 12”

  25. #25
    Join Date
    Apr 2009
    Location
    The Dude Abides
    Posts
    10,976
    Quote Originally Posted by SampsonandDelilah View Post
    “Only 12”
    What's the record on here for oldest thread resurrected?

  26. #26
    Join Date
    Apr 2018
    Posts
    1,150
    Quote Originally Posted by Honkey_Kong View Post
    You're replying to a thread that's 12 years old.
    It's another slow day on the forum... Yawn...

  27. #27
    Join Date
    Aug 2008
    Location
    La Cocina
    Posts
    4,119
    Quote Originally Posted by Honkey_Kong View Post
    What's the record on here for oldest thread resurrected?

    12 has to be close….

  28. #28
    Join Date
    Jan 2020
    Location
    East Coast
    Posts
    488
    Quote Originally Posted by The Observer View Post
    Can't you just push air into both vials then draw from vial 1 then vial 2? Afterwards change the needle and inject?
    I don’t personally need to inject air into the compound before I withdraw it but I guess it makes it easier but yes definitely change out the needle, personally I’ll draw the compounds with a larger needle and inject with like a 23 or even 25 if it’s not too thick

  29. #29
    Join Date
    Apr 2015
    Location
    SoCal
    Posts
    7,393
    Too thick? Heck I inject with slin pins 29 g when I inject daily.


    Sent from my iPhone using Tapatalk

  30. #30
    Join Date
    Jan 2020
    Location
    East Coast
    Posts
    488
    Quote Originally Posted by charger69 View Post
    Too thick? Heck I inject with slin pins 29 g when I inject daily.


    Sent from my iPhone using Tapatalk
    Man I have some test E that I’ve broken the wings off the syringe pushing through a 25 however I think there is a big difference shooting 1 cc or 3 cc’s through that needle

  31. #31
    Join Date
    Jun 2018
    Posts
    2,916
    Damn, old thread. Weird seeing so many guys with thousands of collective posts that no longer come on here.

  32. #32
    Join Date
    Apr 2009
    Location
    The Dude Abides
    Posts
    10,976
    Quote Originally Posted by Test Monsterone View Post
    Damn, old thread. Weird seeing so many guys with thousands of collective posts that no longer come on here.
    Yeah, I haven't seen dec11 on here in a long time.

  33. #33
    Join Date
    Jul 2011
    Location
    Denver
    Posts
    2,284
    I've done it many times between empty/full and different compounds. No problem at all. Just keep everything clean. Swab the top of the vials, and use a fresh, clean needle. Draw some air between vials if you need to. Be sure of your measurements.
    I do like to switch to a fresh needle once I'm done drawing my compound(s). It makes the stick just a little less unpleasant. Modern needles are so sharp, even the drawing process dulls them just a bit.

  34. #34
    Join Date
    Dec 2004
    Location
    E London,no SOURCES given
    Posts
    14,947
    Quote Originally Posted by rampage1 View Post
    it is very safe to mix 2. compounds in the same needle just make sure they are both oil base ,if using water base make sure both are water base. do not mix a water base compound with an oil base compound in the same needle. you can take a water base and an oil base compound by 2 different needles you have to stick your self twice they both will work together in your body.
    You can mix water based and oil,I have umpteen times mate and anyways very old thread so bye bye ��
    _____________________

    Remember.............for us to help you you need to help us....................stats and exp.........

    Source checks and Ugl's to be kept to PM's
    dont ask for source checks unless you have 100 posts/and 45 days minimum as a participating member.........

    Booz.. a long-standing member of the AR Police:

    sorry but absolutely no sources will be checked at this present time....

Thread Information

Users Browsing this Thread

There are currently 8 users browsing this thread. (0 members and 8 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •