Are bigger syringes easier to inject?

[Test Monsterone]

I have like 3 different brands of 1 ml syringes and only one of them are any good (Global). Yesterday I dam near ripped my shoulder off trying to inject 1cc of Prop. My hand was shaking so bad with the amount of force I had to use. Even with nothing in the syringe the plunger sticks.

The next step up is 3 ml I believe. Should I go with that?

[Couchlockd]

I have like 3 different brands of 1 ml syringes and only one of them are any good (Global). Yesterday I dam near ripped my shoulder off trying to inject 1cc of Prop. My hand was shaking so bad with the amount of force I had to use. Even with nothing in the syringe the plunger sticks.

The next step up is 3 ml I believe. Should I go with that?

Your source is selling old barrrels

I use vet meds for Pinz.

[GearHeaded]

a 3ml syringe with a 23g pin will flow smooth as butter. . I injected 9 ml yesterday (three 3cc syringes) and did not have a single issue.
I can't imagine having to struggle with just 1ml of gear. maybe your brand of syringes is a crap or old stock as well, idk. but it should be easy and not a struggle to inject

[half natty]

a 3ml syringe with a 23g pin will flow smooth as butter. . I injected 9 ml yesterday (three 3cc syringes) and did not have a single issue.
I can't imagine having to struggle with just 1ml of gear. maybe your brand of syringes is a crap or old stock as well, idk. but it should be easy and not a struggle to inject

9ml tell us moreeee what was this cocktail of whore moans [emoji484] [emoji81]


Sent from my iPhone using Tapatalk

[The Deadlifting Dog]

It is a physics thing but...
the larger the syringe the more forcefully you have to push on the plunger....

it is the exact thing but in reverse where....
The smaller a needle the more forcefully you have to push on the plunger...

So to answer OP's question...
a larger syringe will make it more difficult.
using a larger needle (smaller gauge) will make it easier.

[Couchlockd]

9ml tell us moreeee what was this cocktail of whore moans [emoji484] [emoji81]


Sent from my iPhone using Tapatalk

Hmmm..

I'm going to guess

2ml test
2ml mast
1ml Tren base
1ml test base
2ml npp
1ml Tren ace

[ScotchGuard02]

Get some 3cc name brand syringes. The cheap ones have poor rubber and will degenerate over time causing it to stick to the sides. Force of exertion is Pressure * Syringe area (F=PA). You need a constant pressure to push the oil into your body. That means that Force applied to the syringe is directly proportional to the Area of the syringe. Larger the area, more Force will be required to push the oil into the body.

[TRA]

Get some 3cc name brand syringes. The cheap ones have poor rubber and will degenerate over time causing it to stick to the sides. Force of exertion is Pressure * Syringe area (F=PA). You need a constant pressure to push the oil into your body. That means that Force applied to the syringe is directly proportional to the Area of the syringe. Larger the area, more Force will be required to push the oil into the body.

Nice explanation! Dead lifting Dog nailed it also, but I like your simplified physics explanation a lot. It’s counterintuitive so good stuff.

Applying what was said about smaller needle size requiring more pressure, if trying to inject with a 1ml syringe but smaller needle if it isn’t a Luer lock (needle just slides onto 1ml syringe without twisting lock mechanism) you will likely blow the syringe off the needle with a lot of pressure. I tried some test enanthate that way and tried to use a small pin but had to go up to 25ga to be able to keep the needle on.

[diesel101]

a 3ml syringe with a 23g pin will flow smooth as butter. . I injected 9 ml yesterday (three 3cc syringes) and did not have a single issue.
I can't imagine having to struggle with just 1ml of gear. maybe your brand of syringes is a crap or old stock as well, idk. but it should be easy and not a struggle to inject

Just out of curiosity what all did you inject to equal 9 ml?

[GearHeaded]

Just out of curiosity what all did you inject to equal 9 ml?

I don't normally inject 9ml in one sitting.. but I happened to be clearing out my steroid stash of near empty bottles yesterday (want it to be fresh for new stock coming in). so to get rid of them I filled up 3 syringes full of oil. injected my outer triceps, outer biceps, and inner biceps and then went and hit an arm workout.
it was just some Npp, Eq, test, deca, and a bit of injectible adrol.. didn't bother to add up Mg's of anything specific. just drained all the half empty bottles and stuck it

[almostgone]

Nice explanation! Dead lifting Dog nailed it also, but I like your simplified physics explanation a lot. It’s counterintuitive so good stuff.

Applying what was said about smaller needle size requiring more pressure, if trying to inject with a 1ml syringe but smaller needle if it isn’t a Luer lock (needle just slides onto 1ml syringe without twisting lock mechanism) you will likely blow the syringe off the needle with a lot of pressure. I tried some test enanthate that way and tried to use a small pin but had to go up to 25ga to be able to keep the needle on.

The last time I ordered slin pins, I ordered tuberculin syringes by mistake.
They're made the same stupid way. No Leur lock, just the external taper of the syringe mating with the internal taper of the socket of the needle. Quickly learned to seat them with a little extra force prior to use.

[Quester]

I don't normally inject 9ml in one sitting.. but I happened to be clearing out my steroid stash of near empty bottles yesterday (want it to be fresh for new stock coming in). so to get rid of them I filled up 3 syringes full of oil. injected my outer triceps, outer biceps, and inner biceps and then went and hit an arm workout.
it was just some Npp, Eq, test, deca, and a bit of injectible adrol.. didn't bother to add up Mg's of anything specific. just drained all the half empty bottles and stuck it

Do you feel like you get better results by injecting into the muscle you are working?

[Test Monsterone]

Well guys, don't order from Westend medical supplies... cause that's where I have my syringes from, and they're pretty much garbage. They have no phone number, they don't answer emails. I emailed them 3 times about this and nothing. F*ck those greedy bastards. Located in California, home of the biggest crooks lol (I know cause I lived there). Takes them 2 weeks just to ship your sh*t. I hope they go under.

[Test Monsterone]

While I'm here, what are the best name brand syringes?

[Ashop]

I have like 3 different brands of 1 ml syringes and only one of them are any good (Global). Yesterday I dam near ripped my shoulder off trying to inject 1cc of Prop. My hand was shaking so bad with the amount of force I had to use. Even with nothing in the syringe the plunger sticks.

The next step up is 3 ml I believe. Should I go with that?

I like and prefer a 3ml B-D Syringe.

[Old Duffer]

I like and prefer a 3ml B-D Syringe.

Agreed. I tend to buy cheap crap cuz I am what I pin but B-D is top notch

[Couchlockd]

The last time I ordered slin pins, I ordered tuberculin syringes by mistake.
They're made the same stupid way. No Leur lock, just the external taper of the syringe mating with the internal taper of the socket of the needle. Quickly learned to seat them with a little extra force prior to use.

I grab a few handfulls of leur slip tuberculins 1ml every month at eye doctor.

Never had an issue with them coming undone.

I like 1ml pins for things .5ml and under. Very accurate.

BEST TO WORST NEEDLES.
1) BD
2) SoftTouch
3)Terumo
4)Excel
5) couviden

BEST TO WORST BARRELS
1)Excel
2)Bd
3) Terumo
4) Softtouch
5) couviden

[GearHeaded]

Do you feel like you get better results by injecting into the muscle you are working?

for sure. you get a much better mind-muscle connection when training a body part you just injected, and you get a bit more of a pump and sense of fullness (I think because blood is already in the muscle from the inflammation caused by the injection), which may lead to "fascia stretching'' and more total potential growth especially in body parts like arms.

[almostgone]

I grab a few handfulls of leur slip tuberculins 1ml every month at eye doctor.

Never had an issue with them coming undone.

I like 1ml pins for things .5ml and under. Very accurate.

BEST TO WORST NEEDLES.
1) BD
2) SoftTouch
3)Terumo
4)Excel
5) couviden

BEST TO WORST BARRELS
1)Excel
2)Bd
3) Terumo
4) Softtouch
5) couviden

It's only one or two out of a hundred, but I like the integrated needle the best.
It might be me being clumsy.

[Couchlockd]

It's only one or two out of a hundred, but I like the integrated needle the best.
It might be me being clumsy.

I wish for a 2ml barrel with 200 unit graduation with 29g 3/4" needle.

That is the perfect combo of volume, needle length and big enough to draw (with some patience) and small enough to be ultra comfortable.

[Arcânn]

for sure. you get a much better mind-muscle connection when training a body part you just injected, and you get a bit more of a pump and sense of fullness (I think because blood is already in the muscle from the inflammation caused by the injection), which may lead to "fascia stretching'' and more total potential growth especially in body parts like arms.

Too bad calf injections seem to be a no-go for most people

[Obs]

Do you feel like you get better results by injecting into the muscle you are working?

Imo site injection growth takes a while but it exists.
I used to think not but I have changed the shape of my glutes and biceps by pinning in the same areas.

A shorter ester will be more prolific than a long one.
If you pin suspension it starts binding with receptors immediately. Something slow release takes so long to reall take effect that it may not be noticable.

By injecting propionates in my glutes at the top I have literally squared my big ass off. If I flex right I can probably set a beer can on it.

My biceps I injected 100's of times up top and I have extra height and definition there.
Its not astounding and takes quite some time though.

Also I better add...

People have basically disproven it but for the fact they are running long ester girly cycles. I have experimented on this freak show at levels undocumented. Time speaks the truth much better than pubmed.