Results 1 to 15 of 15

Thread: injection malfunction

  1. #1
    Join Date
    Dec 2005
    Posts
    98

    injection malfunction

    i was injecting a 3 cc injection, i stabbed and pulled back and seen no blood. so i pushed about half the liquid in and a little voice in my head said to pull back again due to an acute stinging pain during injection and seen blood so i said f**k it and finished the injection without withdrawing and stabbing again.
    my logic told me that i seen blood due to me moving needle around in glute during injection using left hand when im really right handed. is my logic wrong?
    did i waste the liquid this wk? cause i made sure i didnt see blood b4 even commencing injention.

  2. #2
    Join Date
    Dec 2005
    Location
    New England
    Posts
    2,599
    how large was your syringe..i imagine it would be extrememly hard or impossible to aspirate with a full syringe...not to mention it was a glute shot so its one handed..and no your oil is not wasted blood can come out after as long as there is no blood coming into the syringe upon aspirating

  3. #3
    Join Date
    Apr 2006
    Location
    Rising from my Ashes !!
    Posts
    9,717
    If you injected INTO your vein, you would know it immediately! you may have nicked a vein on the way in, and like you said moving the needle too much.

    What were you shooting. Why a full 3cc at once?

  4. #4
    Join Date
    Dec 2005
    Posts
    98
    to be honest it is only a 3 cc syringe
    so my logic was correct

  5. #5
    Join Date
    Feb 2006
    Location
    Hotel California
    Posts
    2,861
    3cc- dam - Sounds like one hell of a dose.

  6. #6
    Join Date
    Dec 2005
    Posts
    98
    i was shooting 2 ccs/400mg eq and 1cc/250mg test e

  7. #7
    Join Date
    Dec 2005
    Posts
    98
    i shoot this inj on sun
    and i shoot 200mg eq , 250mg test e on wed

  8. #8
    Join Date
    Dec 2005
    Location
    New England
    Posts
    2,599
    Quote Originally Posted by jantg21
    i shoot this inj on sun
    and i shoot 200mg eq , 250mg test e on wed
    why not 300 eq on sunday and 300 on wednesday? that would be the ideal way to do it then you would only have 2.5 cc's on your sunday injection..not a huge difference but its better for stable blood levels anyways

  9. #9
    Join Date
    Apr 2006
    Location
    Rising from my Ashes !!
    Posts
    9,717
    Quote Originally Posted by jantg21
    i shoot this inj on sun
    and i shoot 200mg eq , 250mg test e on wed
    may I suggest getting some 5cc syringes if you are gonna shot 3cc's at a time

  10. #10
    Join Date
    Dec 2005
    Posts
    98
    i had half an inch to see if blood entered upon aspirating and made sure it did not , so im good to go ha.
    thanx for info anabolios

  11. #11
    Join Date
    Dec 2005
    Posts
    98
    so 3 cc injection is bad for stable blood levels?
    will take advice on 5cc syringe/learned hard way

  12. #12
    Join Date
    Dec 2005
    Posts
    98
    well thanx for info anyways bros
    appreciated

  13. #13
    Join Date
    Apr 2006
    Location
    Rising from my Ashes !!
    Posts
    9,717
    Quote Originally Posted by jantg21
    so 3 cc injection is bad for stable blood levels?
    will take advice on 5cc syringe/learned hard way
    It's not that shooting 3cc at once is bad, but if you are gonna do it, then a 5cc syringe will give you more room and you won't have to have the plunger pulled all the way to the end making it harder to inject and more painful if you move the needle around a lot,
    Injecting oils shoudl be a slow process pushing it in anyway, so 3cc's will just take a while pushing on the plunger

  14. #14
    Join Date
    Dec 2005
    Posts
    98
    thanx SMAN will definetely take advice on size of syringe, you know

  15. #15
    Join Date
    Dec 2005
    Location
    New England
    Posts
    2,599
    ok...i assume your eq is 200mg/ml...you are shooting 400mg one time and 200mg the next....why not go 300mg each time 1cc=200 2cc=400 1.5cc's=300

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •