Fina ?

[Grant]

When i read the instructions on how to make Fina from a kit, they show two plastic cases of Fina. The next instruction is to crush them and pour them in a solution. What exactly is the mg/cc then? They didn't talk about that at all in the instructions at the GotFina.com website. How are you supposed to know how much you are injecting? Does anybody else have any methods they want to share with me?

[testaprim]

well for starters if it showed two carts it was the conversion for a 4gram kit, which yealds approx 40ml at a ratio of 75mg/ml if you use all of the oil that is provided. that is usually the standard mg/ml for the kits. If you wanted a higher ratio you would use less oil, but it may be a little more painful because the ba concentration would be higher. there are a couple of good post on this board about the different ratios. if it is your first time making it i would just use all the oil that is provided.

test

[Buddha_Red]

if your using two carts of fina it most likely will be over 75mgs per ML

if you use fkits.com version its 100mgs per ml and around 42mls total

a typical dosage for new fina users is 75mgs ED or 150mgs EOD
if its 75mgs per ml just use one cc if its 100mgs per ml use 3/4 of a cc for same.

[testaprim]

This is for 2..cartridge2 of finaplix-h and 1... 4gm kit
With a 3% loss of product in the conversion
If you do everything correctly the
Oil(mls) to mg strenth would be as follows.

35ml = 110mg/ml
36ml = 108mg/ml
37ml = 104mg/ml
38ml = 102mg/ml
39ml = 99mg/ml
40ml = 97mg/ml
41ml = 95mg/ml
42ml = 92mg/ml
43ml = 90mg/ml
44ml = 88mg/ml
45ml = 86mg/ml
46ml = 84mg/ml
47ml = 82mg/ml
48ml = 80mg/ml
49ml = 79mg/ml
50ml = 77mg/ml

sorry i got ahead of myself on the first post above is the conversion for a 4g kit, if you do a 2g kit it is closer to 75mg/ml

test

[Buddha_Red]

great info brother thanks for the post

[landshark]

Nice post testa, was always interested but never took the time to do the math.