Results 1 to 23 of 23

Thread: Oil comes back out????

  1. #1
    Join Date
    Feb 2010
    Posts
    2,039

    Oil comes back out????

    Just injected in my delts. After I injected and pulled the pin out a lil oil and blood came out. The blood is normal at least for me but the oil, never happened. Iv pinned heaps and never had that.

    Anybody experienced the same thing??? And why???

  2. #2
    maybe you are not going deep enough, what size pins are you using?
    i get this ocassionally, jus apply pressure as soon as you pull out the pin.. no major drama....

  3. #3
    Join Date
    Sep 2009
    Location
    Minnesota U.S.A
    Posts
    332
    are you using the z track method if not look it up that helps out alot with keeping the oil inside the muscle lol

  4. #4
    Join Date
    Feb 2008
    Location
    Australia
    Posts
    1,265
    Pull the skin tight while sticking the needle in, prevents this

  5. #5
    marcus300's Avatar
    marcus300 is offline ~Retired~ AR-Platinum Elite-Hall of Famer ~
    Join Date
    Jan 2005
    Location
    ENGLAND
    Posts
    40,919
    Quote Originally Posted by ArmedHammerd View Post
    are you using the z track method if not look it up that helps out alot with keeping the oil inside the muscle lol
    Correct the Z-Track injection protocol will stop any oil from leaking out,

  6. #6
    Join Date
    May 2010
    Location
    NC
    Posts
    519
    good info. thank you. The same thing was happening to me...i just thought it was normal to have a little drop or two leak out.

  7. #7
    dec11's Avatar
    dec11 is offline 'everything louder than everything else'
    Join Date
    Jan 2009
    Location
    *no sources i wont reply*
    Posts
    14,140
    common enuf for tht to happen, ive notice tht if the delts are being frequently injected during a cycle, then the more likely this is to happen

  8. #8
    Join Date
    Feb 2008
    Location
    UK West yorkshire
    Posts
    1,171
    Holy cow... i didn't know about the Z track method, i thought it was normal for the oil to come out...

    for those who wanna know how to do the z track injection, follow the link...

    http://www.youtube.com/watch?v=IPp28ZGgobw

  9. #9
    Join Date
    Aug 2007
    Posts
    230
    I don't get it, looks like a normal injection to me.

  10. #10
    Join Date
    Nov 2004
    Location
    Fairfax,CA.
    Posts
    2,960

    Get it now?

  11. #11
    Join Date
    Nov 2009
    Posts
    410
    Good info.

  12. #12
    Join Date
    Feb 2010
    Posts
    2,039
    You can't use ztrack on delts though, that's wer my problem is. Any other suggestions?

  13. #13
    Big's Avatar
    Big is offline Retired~ AR-Hall of Famer ~ "Enforcer"
    Join Date
    Dec 2005
    Posts
    28,651
    Quote Originally Posted by Dr Pepper View Post
    You can't use ztrack on delts though, that's wer my problem is. Any other suggestions?
    inject slowly and wait a bit for the oil to absorb before taking the pin out, but if you've injected plenty and this has only happened once chances are it's nothing to worry about.

  14. #14
    Join Date
    Feb 2010
    Posts
    2,039
    Thanks big will do

  15. #15
    Join Date
    Apr 2008
    Posts
    30,269
    Quote Originally Posted by Big View Post
    inject slowly and wait a bit for the oil to absorb before taking the pin out, but if you've injected plenty and this has only happened once chances are it's nothing to worry about.
    EXACTLY. I have NEVER (knock on wood) had any oil leak out and most of the time I dont have more than a small drop of blood. I also do the Z method more or less without even meaning to due to just how I do my injection.

    I read about people asking about the oil leaking LONG before (1 yr or more) before doing my first injection, that's why I have never just pulled out quickly. I figure let it ALL get in there....

  16. #16
    dec11's Avatar
    dec11 is offline 'everything louder than everything else'
    Join Date
    Jan 2009
    Location
    *no sources i wont reply*
    Posts
    14,140
    i pull the pin out a few mil and let all settle for a moment

  17. #17
    Join Date
    Jun 2010
    Location
    St. Paul, MN
    Posts
    224
    I was having that problem to. I thought it was maybe because I was using 21 g needles. A few times a bunch of oil came out but I was injecting a lot of oil only once a week.

    But thanks for the info, next cycle I will just be sure to keep the needle in for 10 seconds after injecting.

    I plan to get 1in 25 guage needles next time. I know that 1 in is ok for delts and quads, but is 1 in long enough to hit glutes?

  18. #18

    Lightbulb

    Quote Originally Posted by Dr Pepper View Post
    Just injected in my delts. After I injected and pulled the pin out a lil oil and blood came out. The blood is normal at least for me but the oil, never happened. Iv pinned heaps and never had that.

    Anybody experienced the same thing??? And why???
    You need to inject deep IM.

  19. #19
    Join Date
    Feb 2010
    Posts
    2,039
    Quote Originally Posted by **** View Post
    You need to inject deep IM.
    I do inject deep using 1" for delts just leaving the pin a lil bit out just incase of it snapping

  20. #20
    Join Date
    Feb 2010
    Posts
    2,039
    Quote Originally Posted by tomt45 View Post
    I was having that problem to. I thought it was maybe because I was using 21 g needles. A few times a bunch of oil came out but I was injecting a lot of oil only once a week.

    But thanks for the info, next cycle I will just be sure to keep the needle in for 10 seconds after injecting.

    I plan to get 1in 25 guage needles next time. I know that 1 in is ok for delts and quads, but is 1 in long enough to hit glutes?
    1.5" is more commonly used for glutes

  21. #21
    Join Date
    Feb 2010
    Location
    lone star state
    Posts
    1,425
    Would a 5/8 in length be good for delts? My delts are still small and I was scared to use them as a pin site last cycle.

  22. #22
    Big's Avatar
    Big is offline Retired~ AR-Hall of Famer ~ "Enforcer"
    Join Date
    Dec 2005
    Posts
    28,651
    Quote Originally Posted by gymfu View Post
    Would a 5/8 in length be good for delts? My delts are still small and I was scared to use them as a pin site last cycle.
    5/8" is fine for delts

  23. #23
    Join Date
    Dec 2009
    Location
    rhode island USA
    Posts
    565
    i just wait a few seconds after i finish injecting before i pull the needle out and that also seems to help

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •