QVT 011
Exp 01 2007
Lab test from their site says 156.87mg/ml. A quarter of advertised strength.
What the hell is that?!
Picked up more stock, ran the number, thats when i noticed.
QVT 011
Exp 01 2007
Lab test from their site says 156.87mg/ml. A quarter of advertised strength.
What the hell is that?!
Picked up more stock, ran the number, thats when i noticed.
Yep, Mex gear BLOWS
pretty weak, but the last time i used qv it was overdosed
You never know with mexican gear. Some batches over dosed, some under. Some dont even have 10cc (if that is what the bottle says) in them and some have more. Frustrating as hell for sure.
Bc
I was asking this question a while back on a board. I wanted to see lab results and compare them against what their website says. Do you have the report?
I'm going by what their website says.
You'd think at that strength they'd grade it "toilet disposal" and cook up a new batch.
I have been on QV's Test E 250 for 5 weeks and have gained about 17 lbs.. Must be batch to batch.. Reports! Need reports! Thanks ya'll
Mex gear is a thing of the past if you ask me. With the number of underground labs making top quality gear for great prices, why even bother with any Mexican made gear?
-moto
In my case, I live in south Texas, and one of the major QV distrubutors is 5 hours away across the boarder. Walk in, pick what you want, pay and walk out.
Been burnt too many times. I don't gamble my money with Qv cause i know what i'm getting.Originally Posted by motoxxxguy
Just a heads up for peeps to steer clear of this batch or inject an extra .25 everytime.
thats sucks bro,but atleast you knowOriginally Posted by Pork Chop
The only good thing I'll say about QV is they post the results
on their site for all to see weather they are good or bad or
in this case terrible...
Moto is right though, with so many UG Labs making very good
quality products why mess with Mexican Vet Gear if you don't
have too?
That is not a quarter of the advertised strength. The cyp only comes in 200mg per ml. So its underdosed, but not by 3/4.Originally Posted by Pork Chop
According to their site, my test e 250 is at 242. Of course that site could be a huge lie, but on the other hand, its made for animals. Animals don't careI did end up grabbing some underground gear 500mg per ml test.. Oh yeah baby.
Got some of that myself for my winter bulking cycle...
Couldn't wait to try it so I injected some the other
night and it's not really painful at all... Shot it in my
Tri to really test how bad the pain was gonna be...
No worse then injecting a 250mg/ml test ent IMO...
Originally Posted by dogsofwar
Yeah whats up with that? I had heard that more concentrated stuff and even 50ml bottles had more pain while injecting. Is this true? Any details???
The 500mg per ml is sweet. It only takes 3 clicks on the syringe and thats the dose! Of course I am doing EOD injections.. Lovin it.
how is it only a quarter when there cyp is only 200mgs.
Mex gear is ass. Especially QV, very dirty stuff.
When you say 50ml bottles you mean Quality Vet Test Ent?
If so then yeah 've heard the same thing many times... Far
as high dose gear goes all depends how it was made, sure
higher dose gear is gonna hurt a little more, but if it's made
right it won't be that much worst then lower concentrations...
Originally Posted by dogsofwar
Just 50ml's in general. I read somewhere that the concentration didn't matter, but 50ml bottles were generally more painful when injecting. I think thats bullsh*t. Its the same gear. As you said, I think higher concetrations may be more painful. Why is that?
Originally Posted by dogsofwar
the benzine alcohol burns.
I meant it's low a quarter strength.Originally Posted by pietro75
the ba content in the 50ml bottles are definatly higher then the 10ml's. also i hear alot of bad stuff being said about qv but that is all i used for the last year or so and have made great results off it. im extremly happy with the gains i have made from qv products. i know that there are fakes around so maybe some of you got them and that is why you wernt happy with the results.
you will have to take 1 1/3 cc to make 200mgs.
Why would the ba content of a 50ml be higher? They make the same batches and fill the bottles up with the same sh*t dont they? I know my 500mg per ml will be more painful, but I wouldn't think the 50ml test 250 would be any different than the 10ml 250. I have awesome results from my QV. 17lbs in 5 weeks isn't bad my friends. The place I get QV on the boarder is definately good stuff.Originally Posted by pietro75
im not sure im not a chemist, that is what i have heard from others on different boards. i have had both of them before and the 50 did seem more painful to me. i only purchase the 10ml test-enth now, just incase.
tried the qv dbol and deca and didn't get anything from it, dbol 50mg ed and deca 600mg wk
Man, why do these UG labs have to be jerk offs? Why screw the consumer by shipping out underdosed products? Did they never think for one f()cking second that they wouldnt discovered? We need to set up some kind of committee that will work on donation (money and gear) and have everyones crap tested on a daily basis. This would weed out the turds rather rapidly. All in favor!!! "I do"
I dont think QV is exactly a "UG" lab...Originally Posted by dogsofwar
The better UG's dose their products correctly or slightly over
and also pay to have their products tested to make sure the
powders are high quality they use in the products... Not all
of them do this, but the better one do... Just look around the
boards and you'll see lab tests for some of the better UG Labs...
Originally Posted by dogsofwar
UG Labs and homebrew are the way to go.
Sucks to see results like this.
thats hurtin, thanks now ill no to stay clear of that garbage.Originally Posted by Pork Chop
Originally Posted by Pork Chop
Turns out you dont really know what your getting.
People still buy QV?Originally Posted by Pork Chop
![]()
I use QV... some of its overdosed some is underdosed. Ive never seen it that bad "156.87mg/ml" normally its off 1-10mg. I gained 30lbs off it last time so it must work. My new batch is either dead on or overdosed![]()
I agree 100%. Someone gave me 3 free QV Test Enan, and I almost don't want to use them.Originally Posted by motoxxxguy
I can't believe all this crap.
QV is a lab that must be operating under the guidelines of the health department and others organizations in Mexico, it has been around for over 20 years, and they have the capability and the resources to buy all the equipment they need to have a state of the art facility.
I personally don't think that they actually there to produce veterinarian products, IMO that is just a face they use to be able to produce steroids under the law.
Has anyone wonder why QV only produces steroids and no other type of medications for animals? I'm sure there must be a lot more they could do for veterinarian use that would be profitable.
At least QV runs lab work for every batch they do, and the vast majority of the time they are either very close or over dose. Yes I've seen dose lab work for some UG but they don't mean anything to me. They do it only one time, in a batch they prepare with that test in mind, and after that nobody ask again... how do we know they are still producing the same quality if they don’t test in every batch.
Underground labs has no sanctioning entities looking over their practices, nobody knows where they are or who they are, no one sees them doing their business, so how could you be sure that they work in a clean and sterile environment.
Bro, you obviously aren't a Mexican. If you were, you would know that any government agency is always paid off any anything goes.Originally Posted by artcien
Fvck mex gear...........thats what i started out using..............then became enlightened and use mostlly QGL, Roschmann, DaVinci.............almost no discomfort as opposed to vet grade gear........I got results from QV for sure though....there batches seem to be hit and miss, sounds like you got a sh*tty batch.....I've had it over by as much 10 or 12 mg/ ccOriginally Posted by motoxxxguy
![]()
There are currently 1 users browsing this thread. (0 members and 1 guests)