what size syringe do you use for tren?

[Satva1100]

what size syringe do you use for tren?

[johnnybigguns]

Depends where your injecting not the compound unless its in a very thick oil

[Big]

what size syringe do you use for tren?

are you running tren only? if not use what you're using for the test.

[Outta Kontrol]

for what site?

[Immortal Soldier]

are you running tren only? if not use what you're using for the test.

I don't like mixing compounds.

Pet Peeve.

[Satva1100]

im not running tren at the moment -thinking about it for next cycle along with test p and deca -so with everyday injections i figured id have to go in a bunch of different sites and i didnt think the 23g 1 1/2 syringes would be good for anything but my glute

[Outta Kontrol]

tren test p and deca. sounds interesting. just curious why deca and no winny? 23 is a bit big for me but hey... I would say 25

[Satva1100]

i was gonna use drol the first 4 weeks and use winny at the end for the last 6 weeks

[T-MOS]

23g 1.5 inch for glutes

25g 1 inch for everywhere else

not sure you need both tren AND deca though

[MMArmour]

I don't like mixing compounds.

Pet Peeve.

haha really??? thats kinda funny immortal!

[Satva1100]

what would be better deca or tren for the most mass? im 6' 226lbs 16%bf at the moment -looking to get to 250lbs

[T-MOS]

what would be better deca or tren for the most mass? im 6' 226lbs 16%bf at the moment -looking to get to 250lbs

what is your cycle experience?


tren isn't for the first or second timer due to harsh sides

deca is always a great mass builder if you eat to grow

[Outta Kontrol]

or tren and test e for mass. but i would second T-Mos. go with the Deca and test

[Satva1100]

it will be my second cycle

[T-MOS]

it will be my second cycle

then I would go with the Deca

I waited until about my 5th cycle before running tren and I am glad I did. I was better prepared for the sides. The insomnia and night sweats were a b**ch

[Satva1100]

thanks guys i'll do that

[Ashop]

what size syringe do you use for tren?

3 cc syringe,,23-25g pin.

[Someguy123]

i load everything with a 21-22g. then switch the tip and shoot with a 25g.

[johnnybigguns]

You can mix them all in one syringe. I would use either all long esters or short esters together. If you want deca look up NPP

[Big]

I don't like mixing compounds.

Pet Peeve.

is that sarcasm?

[Immortal Soldier]

is that sarcasm?

I don't see how that comment could be taken in a sarcastic way...

[Big]

I don't see how that comment could be taken in a sarcastic way...

because it sounds like you're saying you wouldn't want to use tren and test, which only makes sense if it's sarcasm. maybe I missed your point (?)
please elaborate on what you meant, and why you feel that way.

[firmechicano831]

Id say a 25

[Immortal Soldier]

because it sounds like you're saying you wouldn't want to use tren and test, which only makes sense if it's sarcasm. maybe I missed your point (?)
please elaborate on what you meant, and why you feel that way.

No, I use tren and test. I just don't put them in the same syringe because part of me doesn't like that and another me fears I might make a mistake.

So I just stick with one compound per syringe.

That's what I meant.

[johnnybigguns]

You must be like a pin cushion.
I see no reason to fear putting multiple compounds in one syringe

[Big]

No, I use tren and test. I just don't put them in the same syringe because part of me doesn't like that and another me fears I might make a mistake.

So I just stick with one compound per syringe.

That's what I meant.

ok that makes more sense. I thought you meant you didn't like combining compounds in the same cycle, not in the same syringe. I combine my gear, but until you get used to it it's kind of a pain in the ass to make sure you get the right amount of each, so I see where you're coming from.

[got test?]

Don't go any lower than a 15g needle.. If you really have to, I guess 18 will work though! haha, If your a horse!!
Seriously, for tren, since it's mostly home made, depending on the oil. Either way, 23-25g will work. Although 25g might just be a tad rougher (harder to push the product in).

[fizler]

my tren goes through a 27g no problem.

[Dgoding1981]

So if I'm running tren ace with test e250 ......50mg eod of tren and 500 mg test once a week can I use the same size needle for both for quad injections

[AlphaMike]

Yes you can.
You can also do more research and make your own thread instead of bumping one thats 5 years old

[derekkpapa1]

you should not be running any gear especially tren if you have to ask that question-- back to grave with this

[Dgoding1981]

I've done ton of research on tren and I've also done 4 cycles of test dbol and pct and they all went good so I'm ready to try something better.i just don't know people that are on anything so I've got to ask someone and I'm. New to steroid forums so I was trying to get some info from people that have tried it and know more then me sorry for sounding like a newbie but I kind of am...so Derek instead of being rude about it maybe you could help.so I've got a few questions that I really can't seen to find the answers I know a lot about all different steroids but just facts so I need the real knowledge that you guys know im gonna use it to cut with test but I also wanted to add winny with my cycle I'm gonna do Winn for 6 weeks test for 14 and tren for 8 at 50 mg eod for the last 8 weeks so if I do test 1-16 can and should I do tren and Winn weeks 8-16 any info would help greatly...thanks guys

[AlphaMike]

Start a new thread, lay out your cycle and stats and list your questions. Plenty of experienced ppl to help you here.

[derekkpapa1]

ok I am sorry for being rude-as alpha mike said start new thread here full stats and details and we will do our best to help u out

[XxAndreaxX]

I use the thinnest needle I find on market, usually the Brown slin pin, for every muscle and every compound, even for my glutes. less scartissue, less pain, cheaper and slower injections. why? because I'm on less than 12%bf and it works well. **** the big needles, **** everyone who torture his muscles with that shit. peace

[MuscleInk]

I use the thinnest needle I find on market, usually the Brown slin pin, for every muscle and every compound, even for my glutes. less scartissue, less pain, cheaper and slower injections. why? because I'm on less than 12%bf and it works well. **** the big needles, **** everyone who torture his muscles with that shit. peace

Provide the gauge please. Honestly, I can't imagine a SQ injection using a slin pin with any oil if the volume is greater than 1ml. It would take far too long and a SQ injection greater than 1ml will be more painful than a properly placed I.M. Injection.

1", 25g needles are perfectly fine in most cases. 1.5" if you are carrying more bf.

[XxAndreaxX]

Provide the gauge please. Honestly, I can't imagine a SQ injection using a slin pin with any oil if the volume is greater than 1ml. It would take far too long and a SQ injection greater than 1ml will be more painful than a properly placed I.M. Injection.

1", 25g needles are perfectly fine in most cases. 1.5" if you are carrying more bf.

its usually the 1,5cm pin, its enough to go through the skin and the layer of fat and into the muscle if you are below 12% BF. it normally comes with max 1ml capacity. your muscles will thank you. and your wallet too. I saw people injecting with the 21 gauge into their delts every day cause doctor says so, that's brutality.

[Capebuffalo]

Wow bump a thread from 09

[Cody95]

Why are people commenting on a thread from 2009??

[GSXRvi6]

Why are people commenting on a thread from 2009??

Dunno but I'll throw my .02 in :-)

Tren Ace 27 gauge 1/2" into outer quad
Long esters 22 gauge 1" into inner (topish?) quad