HCG mixing question - Guidance needed

[MAXIMA5]

My Hcg just came in. This is the first time I've used it, so I'm not 100% sure what to do next.

I got three amps of HCG and three amps of Solvent. Is the solvent BA water or is BA only needed when mixing powder?

I think i need to get a sealed sterile vial, right?

1 amp = 5000 iu. How should I mix it to get easy to use doses?

Also, I realize it needs to be refridgerated. Does it only need refridgerated after it's mixed or should I cool the amps now?

It was shipped from Europe, so I'm sure it wasn;t temp controlled the entire time. Is it still Ok to use?

Thanks in adance for any help.

-
Max5

[MAXIMA5]

Anyone?

[MAXIMA5]

Bump. again.

Wow, I've done more bumps today than Courtney Love.

[toc67guru]

the solvent is either saline water (0.9% sodium chloride),or bacteriostatic water.
it only needs to be refidgerated when reconstituted.
it will keep once mixed for 30 days in the fridge(some manufacturers claim 60 days).
use a 1ml insulin syringe reconstitute with 1 ml of solvent giving 5000iu/ml or 500iu/0.1ml.
only mix what you are going to use.store the unopened phials away from light at 2-15 degree C.

what way are you intending using it?

[speak]

Bump. again.

Wow, I've done more bumps today than Courtney Love.

haha, kinda funny, anyway I have some of the same questions, so ill bump it for you. I have seen this answered before, if you do a search you can find all your answers, I always like hearing new opinions though, especially since no one agrees on how to do hcg

[Swifto]

I posted this a few weeks back...

Buy some Sterile Vials from AR-R and some Bac Water (30ML). Mix 1ML with the powdered HCG slowly mixing it. Dont shake it, its very sensitive. Inject the mixed HCG into the sterile vial. So, 1ML = 5000ius. Inject a further 4ML's into the Vial, so now, 1ML = 1000ius. Personally, I'd add another 5ML's, so, 1ML = 500ius which is a nice figure to work with.

[MAXIMA5]

I posted this a few weeks back...

Buy some Sterile Vials from AR-R and some Bac Water (30ML). Mix 1ML with the powdered HCG slowly mixing it. Dont shake it, its very sensitive. Inject the mixed HCG into the sterile vial. So, 1ML = 5000ius. Inject a further 4ML's into the Vial, so now, 1ML = 1000ius. Personally, I'd add another 5ML's, so, 1ML = 500ius which is a nice figure to work with.

I remember reading that.

I had a brainfart. i didn;t realize the Pregnyl amps contained a powder. I thought it ws a liquid.
duuurrrrr.

[toc67guru]

for sub Q shots you certainly don't need to be injecting 1ml for 500iu,no offence !

[MAXIMA5]

Swift,

If I add an additional 5ml of BA, would the does be 250 iu/ml or 375 iu/ml?

[MAXIMA5]

I ordered some slin pins, but if you think that is too much fluid to inject Sub Q, I might go IM.

[toc67guru]

maxima5 i asked previously what way are you intending using it?
what dosage and for how long?
sub Q is easiest and you do not need a large volume.

[MAXIMA5]

maxima5 i asked previously what way are you intending using it?
what dosage and for how long?
sub Q is easiest and you do not need a large volume.

I was going to use it as an atrophy preventative during cycle at 250-500iu E3D, and then during pct. IM or Sub-Q. doesn;t matter to me.

Also, if I need BA water, then should I toss the solvent that came with it?

[neverenuff21]

Dont mean to hijack but would im or sub q be better for hcg administering?

[joeben22]

I was going to use it as an atrophy preventative during cycle at 250-500iu E3D, and then during pct. IM or Sub-Q. doesn;t matter to me.

Also, if I need BA water, then should I toss the solvent that came with it?

bump for this

[Swifto]

[/B]

bump for this

No, use it IMO.

Dont mean to hijack but would im or sub q be better for hcg administering?

Never seen a difference in absorbtion.

[MAXIMA5]

Swift,
should I throw out the solvent amps if I have BA on it's way?

[fhorst]

I posted this a few weeks back...

Buy some Sterile Vials from AR-R and some Bac Water (30ML). Mix 1ML with the powdered HCG slowly mixing it. Dont shake it, its very sensitive. Inject the mixed HCG into the sterile vial. So, 1ML = 5000ius. Inject a further 4ML's into the Vial, so now, 1ML = 1000ius. Personally, I'd add another 5ML's, so, 1ML = 500ius which is a nice figure to work with.

Yes, this is the best option!
Next time buy some 1000ius (also availible) they come with 1ml, so more simple to dosage.

[MAXIMA5]

I posted this a few weeks back...

Buy some Sterile Vials from AR-R and some Bac Water (30ML). Mix 1ML with the powdered HCG slowly mixing it. Dont shake it, its very sensitive. Inject the mixed HCG into the sterile vial. So, 1ML = 5000ius. Inject a further 4ML's into the Vial, so now, 1ML = 1000ius. Personally, I'd add another 5ML's, so, 1ML = 500ius which is a nice figure to work with.

I just did what Swift recommended above.
Should the powder have dissolved immediately when the 1st ML touched it?
I put the first ML in the Pregnyl amp to mix it so it could be transferred t the sterile vial. After I put the first ml in, it was instantly clear. Is this normal?

[MAXIMA5]

bump.

[Swifto]

I just did what Swift recommended above.
Should the powder have dissolved immediately when the 1st ML touched it?
I put the first ML in the Pregnyl amp to mix it so it could be transferred t the sterile vial. After I put the first ml in, it was instantly clear. Is this normal?

Yes.

[MAXIMA5]

good lookin out. Thanks.

[GoldieTheMack]

Good info.
Subscribed.
Gold

[ascendant]

jesus, you guys make this so much harder than it is! all i do is take the solvent, pour it into the dry powder, then i use a needle attached to a syringe to mix and dissolve the powder, then suck it up with the needle into a syringe. i then put the syringe, needle and all, in the fridge for when i need it. then, you just change the needle as necessary. simple as that! it's sanitary, quick, and efficient.