length of the pin? with im inj

**jeepers** · 02-21-2009, 08:23 AM

Going to be starting a nice 12 plus cycle of test cyp. Product is legit. My question is regarding the darts. I only have 1.5 to .75 inch pins. I usually pin in the glutes FYI. Any advise?

***FireGuy*** · 02-21-2009, 08:42 AM

1 1/2 inch is what is recommended for glute injections.

**Lavacho** · 02-21-2009, 08:45 AM

I use a 23 gauge for my glute and a 25 gauge when im rotating sites for ED / EOD "dart games"

**johnnybigguns** · 02-21-2009, 08:45 AM

Your good to go with the 1.5 in the glute and use the .75 everywhere else if your lean

**redz** · 02-21-2009, 09:05 AM

1.5" for glutes, 1" for quads.

**jeepers** · 02-21-2009, 12:05 PM

MAJOR typo in dart sizes. I have 1/2 inch to 3/4 inch length pins. Talked to my source that I've known for my whole life. Told me that those darts are fine. He uses them. Just go more towards the hip

**johnnybigguns** · 02-21-2009, 12:38 PM

To short for a glute shot I would say forsure

**redz** · 02-21-2009, 01:00 PM

Dont take any more advice from sources..... They dont have your best interest at heart.

**AnimalGear** · 02-21-2009, 01:06 PM

you can order pins cheap all over the internet

1.5 for glutes, 1 for everywhere else, maybe 5/8 for delts if you're small

**stpete** · 02-21-2009, 02:51 PM

^^^^^ x2

**jeepers** · 02-21-2009, 04:52 PM

Originally Posted by redz

Dont take any more advice from sources..... They dont have your best interest at heart.

Dude I'm blood related to my source.

So with a 3/4 inch dart where should I aim for

**Big** · 02-21-2009, 05:00 PM

Originally Posted by jeepers

Dude I'm blood related to my source.

So with a 3/4 inch dart where should I aim for

family or not if he's advocating using a 1/2" pin I wouldn't take any more advice from him. 3/4" would be ok for delts, but I still prefer 1".

**jeepers** · 02-22-2009, 08:02 PM

Originally Posted by Big

family or not if he's advocating using a 1/2" pin I wouldn't take any more advice from him. 3/4" would be ok for delts, but I still prefer 1".

What would you guys suggest for quads. I pinned the 3/4 inch into the upper no fat upper rear hip area. Kept the pinned push deep. Through the soft tissue.

Would the 3/4 inch darts be good for quads?

**Mammon** · 02-22-2009, 08:05 PM

you have been told the correct pins to use already.. man they are cheap.. 15-20 bucks for 100... id buy some

**CHUCKYthentic** · 02-22-2009, 08:05 PM

1" for the quads man. 3/4 would mean you pretty much have to stick the needle all the way in which isnt safe. unless you have a really low body fat in ur quads dont use 3/4

**Gears** · 02-22-2009, 08:44 PM

I use 1" for everything.

**Ricer** · 02-22-2009, 10:46 PM

Is it alright to do 1" for glutes?

**afigs052377** · 02-23-2009, 01:05 PM

Originally Posted by VTECLOL

Is it alright to do 1" for glutes?

1.5 for glutes, 1 for everything else

**Ricer** · 02-23-2009, 07:07 PM

1" is all I got, so it would not work or is it just preferred?

**tadpoleboyy** · 02-23-2009, 07:10 PM

1/2 is too small for almost anything. If youve never pinned before, forget glutes, go for something that you can actually see and reach with accuracy. Delts are easy, 5/8 to 1 inch will do. Quads are also very easy, 1 inch to 1.5 will work.

**Ashop** · 02-23-2009, 07:20 PM

Originally Posted by FireGuy1

1 1/2 inch is what is recommended for glute injections.

Yes...1.5 for glute injects,,,and I use 1" for delts and biceps.

**Ricer** · 02-23-2009, 07:21 PM

I'm going to have my girl do the injections....and 1" is all I stocked up on.
My first injection are next Monday.....

Thread: length of the pin? with im inj

Thread Tools

Search Thread

Rate This Thread

Display

length of the pin? with im inj

Thread Information

Users Browsing this Thread

Posting Permissions