Results 1 to 13 of 13

Thread: pinning 2ml EOD rather than 1ml ED ???

  1. #1

    Thumbs up pinning 2ml EOD rather than 1ml ED ???

    currently 8 days into my prop/var/d-bol cycle and have 50mg/ml amps of prop so am just injecting ED at the moment and was wondering if it would be just as good to get some 2ml syringes and just draw 2 amps at a time so i would only have to inject EOD ?? or is 2ml too much to inject at once ??

  2. #2
    Join Date
    Feb 2010
    Posts
    2,039
    2ml isnt to much to inject. However some people will argue you will get more stable blood levels injecting ED. Personal preference if you ask me. Try EOD see how you feel

  3. #3
    Join Date
    Aug 2011
    Location
    SEC
    Posts
    406
    it will balance out your blood levels better @ ED but for some people, blood levels just dont go up and down as much so therefore it does tend to be a person preference on the burden of ED or the slightly easier EOD...

  4. #4
    aa okay, also the prop i have comes in these rocket shape vials and are a nightmare to crack, do you have to worry about glass breaking into the vials ?? or would the glass not even be able to get through the pins for injection ?? so 2ml is okay then to inect just 1ml if preffered then yea
    cheers

  5. #5
    Join Date
    Mar 2011
    Location
    Arctic Circle
    Posts
    4,147
    Quote Originally Posted by flyguy6661 View Post
    aa okay, also the prop i have comes in these rocket shape vials and are a nightmare to crack, do you have to worry about glass breaking into the vials ?? or would the glass not even be able to get through the pins for injection ?? so 2ml is okay then to inect just 1ml if preffered then yea
    cheers
    Buy an amp cutter, they are extremely cheap.

  6. #6
    Join Date
    Feb 2008
    Location
    Read my blog
    Posts
    3,724
    Personally i would rather go 1ml Ed than 2ml EOD. 2 ml shots get old alot faster than 1ml ed.

  7. #7
    Join Date
    Jun 2008
    Location
    Kitchen, Gym, Kitchen....
    Posts
    13,716
    EOD is just fine.

  8. #8
    Join Date
    Apr 2007
    Location
    In a hood near you
    Posts
    275
    Cracking those amps has never been an issue. Cant speak for every one but my amps usually break is solid pieces so theres no worries about small pieces getting into your syringe. There are some good instructions available about easy & proper ways to crack them open. Once I found those it was so easy I never thought about a cutter, in fact I learned something new today, never knew amp cutters exsited.

  9. #9
    Join Date
    May 2011
    Location
    Texas
    Posts
    70
    Buy urself some filter needles bro, they filterout any particles glass included. In the medical field it is freaking illegal to draw amps without a filter needle. Then just switch to ur preferred gauge and inject. Chances of drawing glass from an amp isn't high but its not zero either, with a filter needle the chances of drawing up glass are zero. Considering that microparticles of glass will most likely end up permanently residing in ur lungs, not worth the risk even a small one in my opinion. Heck u can get plain old syringe filters to draw with on ar-r cheap and just switch needles before injecting.

  10. #10
    Join Date
    Jul 2010
    Posts
    372
    Quote Originally Posted by Big Kat View Post
    Buy urself some filter needles bro, they filterout any particles glass included. In the medical field it is freaking illegal to draw amps without a filter needle. Then just switch to ur preferred gauge and inject. Chances of drawing glass from an amp isn't high but its not zero either, with a filter needle the chances of drawing up glass are zero. Considering that microparticles of glass will most likely end up permanently residing in ur lungs, not worth the risk even a small one in my opinion. Heck u can get plain old syringe filters to draw with on ar-r cheap and just switch needles before injecting.
    Which ones are best? I see there is .20 .45 etc.. I assume the higher the number the better the filter correct? Do you lose alot of the oil in the filter or not enough to even worry about?

    Can you reuse them????

  11. #11
    Join Date
    Feb 2008
    Location
    Read my blog
    Posts
    3,724
    Quote Originally Posted by Big Kat View Post
    Buy urself some filter needles bro, they filterout any particles glass included. In the medical field it is freaking illegal to draw amps without a filter needle. Then just switch to ur preferred gauge and inject. Chances of drawing glass from an amp isn't high but its not zero either, with a filter needle the chances of drawing up glass are zero. Considering that microparticles of glass will most likely end up permanently residing in ur lungs, not worth the risk even a small one in my opinion. Heck u can get plain old syringe filters to draw with on ar-r cheap and just switch needles before injecting.
    I have never heard this and have seen many glass vials broken and used w/o a filter needle. Also, glass particles end up in the liver before they get to the lungs, esp with a IM injection. And its not that big of a deal anyways, now if it accumulates over time then it can pose a possible problem but that would be alot of glass amps broken and the glass bits end up in the injection and then injected. If you break the amps correctly, then there shouldnt be a issue.

  12. #12
    Join Date
    Jul 2010
    Posts
    372
    Quote Originally Posted by Lemonada8 View Post
    I have never heard this and have seen many glass vials broken and used w/o a filter needle. Also, glass particles end up in the liver before they get to the lungs, esp with a IM injection. And its not that big of a deal anyways, now if it accumulates over time then it can pose a possible problem but that would be alot of glass amps broken and the glass bits end up in the injection and then injected. If you break the amps correctly, then there shouldnt be a issue.
    Wow your probably right Bro but just saying glass shards in the liver is no big deal made me just shake my head and mumble hardcore LOL

  13. #13
    Quote Originally Posted by flyguy6661 View Post
    aa okay, also the prop i have comes in these rocket shape vials and are a nightmare to crack, do you have to worry about glass breaking into the vials ?? or would the glass not even be able to get through the pins for injection ?? so 2ml is okay then to inect just 1ml if preffered then yea
    cheers
    Go to your local CVS, Walgreens, Walmart or RITEAID store.

    Look for a fingernail filer that is metal and has a plastic handle, with the edges machined or textured with grooves or ruffness on the outside edges.

    Don't buy the metal fingernail files that have smooth edges.

    Then hold the file like a knife and place it against the V area in the ampule. Then lightly score the glass by sawing all the way around the neck.

    You do not have to saw hard. Just lightly score the edge all the way around. Then grab the ampule and pop the neck off.

    It'll be a perfect snap with no shards and you don't have to buy any special tools to do this.

    Remember your not sawing through the glass hero. Just scoring.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •