I could only get 1.5" 18 gauge needles...

**toyo92** · 01-22-2007, 01:52 PM

My cycle is just about ready, and I had to find a place to get pins...the problem is I got 1.5" 18 gauge needles...it's actually rather difficult for me to get em where I'm currently at...so in your opinions..what kind of pain/problems am I going to have?

**Snrf** · 01-22-2007, 01:53 PM

Pain is weakness leaving the body! I use 18ga to inject prop into my biceps.

j/k. 18ga are huge, I wouldn't stick with them

**sundancekid** · 01-22-2007, 01:55 PM

Ouch

**zipster_dude** · 01-22-2007, 01:56 PM

That is one big pin.

What are you injecting? What is the injection frequency?

I have never used a pin that big, so I would guess you will have some bruising and injection site soreness.

Also, a pin that large might damage the rubber portion of the vial after several punctures. Make sure not to lose your gear from the top of the vial.

**Bigmax** · 01-22-2007, 01:56 PM

Bro,Thats like digging in with a nail from the hardware store...

**lookintogetbig** · 02-13-2007, 02:04 AM

Originally Posted by Bigmax

Bro,Thats like digging in with a nail from the hardware store...

HAHAHAHAHAHAH!!!!!!!!!

**toyo92** · 01-22-2007, 01:57 PM

yeah, theyre def huge...but i'm limited to what i can come by...i know they could work, but any problems with pins that big?

**abstrack** · 02-23-2007, 02:01 PM

Originally Posted by toyo92

yeah, theyre def huge...but i'm limited to what i can come by...i know they could work, but any problems with pins that big?

1. You are going to tear the shit out of you skin and muscles. You will get scar tissue a lot sooner.
2. Going to be very painful even at shots 2X's per week.
3 You're going to tear through the rubber stopper real fast and end up getting that shit in the bottle or in the needle which will inject the rubber back into your body.

UMMM?????? So a better option would be to wait and find the right size pins.

**StevePJC** · 01-22-2007, 01:58 PM

I'd rather have my schmeckle filleted by a Sushi chef that use an 18g pin.

OUCH!

**Halfcenturian** · 01-22-2007, 03:39 PM

Originally Posted by StevePJC

I'd rather have my schmeckle filleted by a Sushi chef that use an 18g pin.

OUCH!

They're designed to be used for injecting directly into the SCROTUM.
One testicle at a time. The pain is unbearable. Like a ten penny nail.
MAN-UP and shoot!

j/k

Don't shoot any higher than 22g IMO. You can use the 18 for drawing.

**toyo92** · 01-22-2007, 01:58 PM

its going to be sust and deca ...

**toyo92** · 01-22-2007, 02:02 PM

i mean i still got time before i start this cycle, so i can try and find some smaller needles, but i just cant have them shipped to me...im in a horrible situation, and trying to make the most of it

**HORSE~** · 01-22-2007, 02:04 PM

Yes you can use 18g pins but the problem is that the larger size pin you use the more scar tissue you will develope....I would try to find some 22g or 23g needles if I were you....

I have used 18g pins about 7 or 8 diffrent times and you can fell every centimeter of it going in....

**Carlos_E** · 01-22-2007, 02:08 PM

Harpoon!

**StevePJC** · 01-22-2007, 02:08 PM

toy are you military?

**toyo92** · 01-22-2007, 02:09 PM

def going tomorrow to see what i can get in a smaller size...also Zipster mentioned something about damaging the rubber vial tops...if i was using 10 mL bottles...i guess that itd add a few other problems

another thing is how much is too much for one injection?

**toyo92** · 01-22-2007, 02:10 PM

steve....yup

**Bigmax** · 01-22-2007, 02:11 PM

Hey bro ..all serious now ..do what you can to get smaller gauge syringes...

**toyo92** · 01-22-2007, 02:15 PM

will do, thanks guys...if i kept the needles for withdrawing would that prove to trouble later on what with the rubber seals and all?

**muaythaiguy76** · 01-22-2007, 02:18 PM

18 gauge is huge ive used it once for a glute shot and it left a quarter size bruise ive also heard of gauges that big damagin the rubber top

**stuball** · 01-22-2007, 02:38 PM

Bro order some 23 g from the upper right hand corner, takes about 3 to 5 days for delevery, and they are cheap as shit, i order them by the hundreds and give them to my douche bag friends who keep usein the same pins over and over...

**GetHugeDieTrying** · 02-24-2007, 03:32 PM

Originally Posted by stuball

Bro order some 23 g from the upper right hand corner, takes about 3 to 5 days for delevery, and they are cheap as shit, i order them by the hundreds and give them to my douche bag friends who keep usein the same pins over and over...

pins are legal in canada thus we do not ever re-use a 9 cent pin or tube.

america's laws are retarted.

**StevePJC** · 01-22-2007, 02:42 PM

Originally Posted by toyo92

will do, thanks guys...if i kept the needles for withdrawing would that prove to trouble later on what with the rubber seals and all?

Never thought of that. That would probably be a problem with your vial tops. Just my opinion.

**Kale** · 01-22-2007, 05:35 PM

Originally Posted by toyo92

will do, thanks guys...if i kept the needles for withdrawing would that prove to trouble later on what with the rubber seals and all?

Dont worry about the rubber it wont be an issue. Just make sure you dont push the pin through the same spot in the rubber all the time. I have never had a problem with a rubber seal deteriorating.

**rafael** · 01-22-2007, 02:40 PM

id never go below 22g myself.

**Decoder** · 01-22-2007, 02:47 PM

Originally Posted by toyo92

My cycle is just about ready, and I had to find a place to get pins...the problem is I got 1.5" 18 gauge needles...it's actually rather difficult for me to get em where I'm currently at...so in your opinions..what kind of pain/problems am I going to have?

go to walmart pharmcy they sell pins to anyone. They have all sizes.

**SuperLift** · 01-22-2007, 02:48 PM

Originally Posted by toyo92

My cycle is just about ready, and I had to find a place to get pins...the problem is I got 1.5" 18 gauge needles...it's actually rather difficult for me to get em where I'm currently at...so in your opinions..what kind of pain/problems am I going to have?

No one is limited to 1 kind of needle, I know like 5 sites of the top of my head that sell all different sizes... just google it bro.

**toyo92** · 01-22-2007, 02:52 PM

haha im deployed...and im not sure customs will take kindly to syringes being delivered to an army base in the desert

**Bigstiffler** · 01-22-2007, 02:57 PM

ur fine unless they search your stuff. my bro is in japan for the marines rite now doing his gear ordering pins off line i dont see u haven any probs

**Taurus** · 01-22-2007, 03:13 PM

i shot a 19g into my quad once. never again. hurt way too much. i can honestly imagine what an 18g would feel like. 23g are painless.

**Maldorf** · 01-22-2007, 03:16 PM

Ive done 18 guage in the quads quite a few times, not something I would choose to do ever again! You might be able to get by if your doing a low dose cycle that takes just one or two injections per week with a long ester. If youre using short esters just forget about it! You really need to pick up some 23 guage 1 inch if you can.

**SNUKA** · 01-22-2007, 03:31 PM

there are alot of places on the net that ship pins discreetly and they are really cheap just shop around. u have to be out of ur tits to inject with an 18 gauge would def draw with that and find a 23 or 25 gauge to inject with

**beuleux** · 01-22-2007, 03:39 PM

Ok give them to me I need to fix some plumbing.

***perfectbeast2001*** · 01-22-2007, 03:45 PM

I have shot with 18G when i had some very thick winny (big crystals in it). I site injected all over with 18s including traps (which hurt like a bitch and made my whole arm go numb). Im not saying it is ideal but it can be done.

**Maldorf** · 01-22-2007, 03:49 PM

Originally Posted by perfectbeast2001

I have shot with 18G when i had some very thick winny (big crystals in it). I site injected all over with 18s including traps (which hurt like a bitch and made my whole arm go numb). Im not saying it is ideal but it can be done.

Yikes, with winny then you were doing ED injections?

**Snrf** · 01-22-2007, 05:28 PM

Originally Posted by perfectbeast2001

I have shot with 18G when i had some very thick winny (big crystals in it). I site injected all over with 18s including traps (which hurt like a bitch and made my whole arm go numb). Im not saying it is ideal but it can be done.

Wow, that's how you know Beast is 'ard!!!

I knew an army guy that used to put a 6 inch nail between both palms, then squeeze til it came out the back of one. He was an 'ard bastard too.

***perfectbeast2001*** · 01-22-2007, 04:09 PM

yes

**Maldorf** · 01-22-2007, 04:16 PM

Originally Posted by perfectbeast2001

yes

You must have really wanted it bad! I would have broken down and just drunk it if I couldnt get it through a 22 gauge. More a man than I!

**Halfcenturian** · 01-22-2007, 05:21 PM

Originally Posted by perfectbeast2001

yes

Beast,

Are you a satanist?

**ILuvTestEn** · 01-22-2007, 05:17 PM

being a miitary man myself I just found a corpsman (in your case a medic) that worked in an aid station and befriended him. After a while I just asked him to get me some. Just becareful and make sure you have some dirt on him just in case he would think on turning you in.