Have i doing this all wrong help please?????

[yannick35]

I think i am mixing my GH all wrong? ok so i use arctotropin 5mg per bottle wich is 15IU, now i use a 1CC syringe to inject sub Q

I am using a 30 gauge 1CC 8mm, now the guy told me that 1IU= 6 bars on the needle but i really think that is wrong because i am using a whole vial per week...........

I would need to know how many bars (because i guess that is how most mesure there GH) is in 1IU if i am using that 30 gauge which is 1CC and 8mm.

Before i was using 1/2 CC and he told me the same 1CC =6 bars on the syringe.

At this rate its costing me more money that i wanted to put into this rehab cycle.

Thanks guy once more.

[yannick35]

Forgot to mention that i mix it with 1CC of bacterial water

[DanB]

Edited, a rookie error and too confusing to be worth reading

[Noles12]

Disregard

[Noles12]

Disregard

[yannick35]

thanks guys this is getting really confusing, yes its a 1CC 100 marks seringe, that would mean 6 marks on the seringe then. Guess i been doing it right. So there would be no problem mixing more water with my GH then.

[gixxerboy1]

on a 1ml slin pin every tick is 2. There is only 50 ticks not 100.
so you are going to the number "1" on the pin? I want to make sure i understand you clearly

[Noles12]

on a 1ml slin pin every tick is 2. There is only 50 ticks not 100.
so you are going to the number "1" on the pin? I want to make sure i understand you clearly

This is correct. My posts were wrong and I have edited them to remove what i posted

It has been a while since I used a 1 ml slin pin and for some reason I was thinking in terms of a .5 mL where each tick is 1 unit.

A 1 ml slin pin has 100 units. The small ticks each represent 2 units as gixxer said.

Therefore 6 ticks=12 units which in your case means a dosage of 1.8 IU.

[yannick35]

This is correct. My posts were wrong and I have edited them to remove what i posted

It has been a while since I used a 1 ml slin pin and for some reason I was thinking in terms of a .5 mL where each tick is 1 unit.

A 1 ml slin pin has 100 units. The small ticks each represent 2 units as gixxer said.

Therefore 6 ticks=12 units which in your case means a dosage of 1.8 IU.

Thanks guys you rock 1.8 is too much meaning i am taking in close to 4IU per day.

[yannick35]

on a 1ml slin pin every tick is 2. There is only 50 ticks not 100.
so you are going to the number "1" on the pin? I want to make sure i understand you clearly

No Gixx i used to go to number 6 it goes in increment of 2 has you say, from 0-10 from the first part, yes its 100 like you said.

I have been told me mix more bacterial water, i only mix 1CC in there.

[gixxerboy1]

yuor confusing me. You went to the number 6 , or 6 lines?

[Noles12]

No Gixx i used to go to number 6 it goes in increment of 2 has you say, from 0-10 from the first part, yes its 100 like you said.

I have been told me mix more bacterial water, i only mix 1CC in there.

So 6 lines as in one line past the 10 marking?

[yannick35]

God this is sick, sorry guys, confusing even for me. 100U 30Gauge, 0-10-20-30-40-50-60-70-80-90-100

each bar counts for 2 so in from the 0-10 it counts 5 bars. I went to the 3 one. I really hope that its less confusing this way. I want to know what 1IU is on that.

[yannick35]

Next time in fill in a vial i guess my best bet is to pull all the GH out once mixed all 15IU of it and look at how many lines 1 IU is

[Noles12]

15 IU with 1ml added

15/100= .15

1 unit= .15 IU

1 line= 2 units

2 units=.30 IU

Therefore each marking on your syringe is .30 IU when you are mixing with 1 ml

[gixxerboy1]

God this is sick, sorry guys, confusing even for me. 100U 30Gauge, 0-10-20-30-40-50-60-70-80-90-100

each bar counts for 2 so in from the 0-10 it counts 5 bars. I went to the 3 one. I really hope that its less confusing this way. I want to know what 1IU is on that.

thats about as close as your going to get. that .9 iu

next time mix with 1.5ml of water then the 1 on the pin will be 1iu

[Noles12]

3 lines= 6 units= .9 IU

If you were to mix it with 1.5 mL then

1 unit= .1 IU

1 line= 2units

2 units=.2 IU

Therefore if you pull to the 5th marking, which is labeled with a 10, you will have 1 IU

[yannick35]

3 lines= 6 units= .9 IU

If you were to mix it with 1.5 mL then

1 unit= .1 IU

1 line= 2units

2 units=.2 IU

Therefore if you pull to the 5th marking, which is labeled with a 10, you will have 1 IU

Mixing with 1.5 will be a lot easier big thanks to you guys once again.

[z06vett]

Wow this is really confusing

[z06vett]

i thought on the insulin syrigne ever 10-20-30-40 units were 1-2-3-4-5iu's is that not correct???

[Noles12]

i thought on the insulin syrigne ever 10-20-30-40 units were 1-2-3-4-5iu's is that not correct???

If the vial contains 10iu and you mix it with 1ml, then yes that would be true.

[Noles12]

Fast acting insulin usually comes in a vial dosed at 100IU/mL (100 units/mL)

This is why the pin has the numbering the way it dose. It is for easy dosing based on insulin as you would simply pull to the exact number corresponding with the number of IUs you are taking

[gixxerboy1]

i thought on the insulin syrigne ever 10-20-30-40 units were 1-2-3-4-5iu's is that not correct???

depends on how much gh is in the vial and how much water you mix with it

If the vial contains 10iu and you mix it with 1ml, then yes that would be true.

correct

[z06vett]

mine is 8iu's .... and i put 80units of water....
am i doing it right gixxer??? i believe i asked u be4....

[gixxerboy1]

yes...

[z06vett]

ya that's what i thought but this post kinda of confused me lol

[yannick35]

It is very confusing because GH is so damn expensive, i have my whole 6 months plannned, and i find i am doing it wrong its more money i need to scratch

[Sgt. Hartman]

Damn you guys are making this a lot harder than it has to be. Read this. http://forums.steroid.com/showthread...=#.T-PucZiTaJU