Results 1 to 34 of 34
  1. #1
    Makiavelo76 is offline New Member
    Join Date
    Apr 2010
    Posts
    34

    Tren coming out of my butt?

    Is the second time I found a organge stain on my boxers after a Trenbolone injection in my butt. Is it possible that the tren liquid is coming out of the orifice after the injection? or is it just blood? My wife said she didn't notice any blood aftr she shot me. This is the second time it happens with tren and the first time that ever happens something like this when using steroids

    Did ever happen to you?

    Thanks!

  2. #2
    Makiavelo76 is offline New Member
    Join Date
    Apr 2010
    Posts
    34
    btw I used same 5cc syringes that I always use.

  3. #3
    Dont wanna be old's Avatar
    Dont wanna be old is offline Knowledgeable Member
    Join Date
    Mar 2009
    Location
    Detriot
    Posts
    2,289
    Did you or her eat cheetos when filling the syringe ?

  4. #4
    EghtySx's Avatar
    EghtySx is offline Junior Member
    Join Date
    Dec 2008
    Location
    Texas
    Posts
    98
    Z-track

    Pull the skin over the injection site to the side, inject the med, release the skin. The holes in the skin and the muscle will not line up afterward.

  5. #5
    Makiavelo76 is offline New Member
    Join Date
    Apr 2010
    Posts
    34
    Quote Originally Posted by Dont wanna be old View Post
    Did you or her eat cheetos when filling the syringe ?
    no we hate cheetos!

  6. #6
    HawaiianPride.'s Avatar
    HawaiianPride. is offline AR's Think Tank
    Join Date
    Apr 2010
    Posts
    5,637

  7. #7
    Makiavelo76 is offline New Member
    Join Date
    Apr 2010
    Posts
    34
    Quote Originally Posted by EghtySx View Post
    Z-track

    Pull the skin over the injection site to the side, inject the med, release the skin. The holes in the skin and the muscle will not line up afterward.
    Roger that! Will do thanks for the tip!

  8. #8
    Steve.O is offline Junior Member
    Join Date
    Jan 2008
    Posts
    144
    once youve injected you do massage the oil in dont you? im sure u do but just a heads up if u dont. only time ive ever had leakage is if i havnt massage the oil in

  9. #9
    Makiavelo76 is offline New Member
    Join Date
    Apr 2010
    Posts
    34
    Quote Originally Posted by Steve.O View Post
    once youve injected you do massage the oil in dont you? im sure u do but just a heads up if u dont. only time ive ever had leakage is if i havnt massage the oil in
    I always do, but you're probably right and I didn't do it long enough.

    Thanks Steve

  10. #10
    Makiavelo76 is offline New Member
    Join Date
    Apr 2010
    Posts
    34
    Quote Originally Posted by HawaiianPride. View Post
    Thanks so much for the vid HP

    Cheers

  11. #11
    Canadream's Avatar
    Canadream is offline Associate Member
    Join Date
    Dec 2008
    Location
    Canada, Ontario
    Posts
    467
    Sounds like a colon issue - Protists coming on.

  12. #12
    V-ROID's Avatar
    V-ROID is offline Member
    Join Date
    Jun 2009
    Location
    Texas
    Posts
    913
    Quote Originally Posted by EghtySx View Post
    Z-track

    Pull the skin over the injection site to the side, inject the med, release the skin. The holes in the skin and the muscle will not line up afterward.
    Great tip. Noted.

  13. #13
    Dont wanna be old's Avatar
    Dont wanna be old is offline Knowledgeable Member
    Join Date
    Mar 2009
    Location
    Detriot
    Posts
    2,289
    I saw 5cc syringe but didn't see length .
    Are you using 1 1/2 inch needle ?
    Also how much are you injecting ?

  14. #14
    Atomini's Avatar
    Atomini is offline Banned
    Join Date
    Mar 2007
    Location
    GTA, Canada
    Posts
    6,121
    If you inject deep enough, you shouldn't need to use the z-track method.

  15. #15
    HawaiianPride.'s Avatar
    HawaiianPride. is offline AR's Think Tank
    Join Date
    Apr 2010
    Posts
    5,637
    Quote Originally Posted by Atomini View Post
    If you inject deep enough, you shouldn't need to use the z-track method.
    Not necessarily true.

    It's always recommended to fully submerge the needle IM, but that doesn't always prevent leakage.

    The Z never fails.

  16. #16
    Dont wanna be old's Avatar
    Dont wanna be old is offline Knowledgeable Member
    Join Date
    Mar 2009
    Location
    Detriot
    Posts
    2,289
    Quote Originally Posted by HawaiianPride. View Post
    Not necessarily true.

    It's always recommended to fully submerge the needle IM, but that doesn't always prevent leakage.

    The Z never fails.
    I never did Z thing , but 1 1/2'' I have had a leak .
    Massaged area and seepage stopped . I don't wanna waste any gear .

  17. #17
    SomeRandomGuy's Avatar
    SomeRandomGuy is offline Associate Member
    Join Date
    Apr 2010
    Posts
    443
    What about just pressing alcohol pad on injection site as soon as you pull the needle out?

  18. #18
    HawaiianPride.'s Avatar
    HawaiianPride. is offline AR's Think Tank
    Join Date
    Apr 2010
    Posts
    5,637
    Quote Originally Posted by SomeRandomGuy View Post
    What about just pressing alcohol pad on injection site as soon as you pull the needle out?
    Won't work. The pad won't conceal the hole preventing leakage, the oil will just leak right into the pad...

    ZTRACKMETHOD

  19. #19
    dec11's Avatar
    dec11 is offline 'everything louder than everything else'
    Join Date
    Jan 2009
    Location
    *no sources i wont reply*
    Posts
    14,140
    Blog Entries
    1
    can also pull the needle up a few mm, after injecting, and let it stay there for 30secs. inject holes heal over mega fast. this works for me

  20. #20
    SomeRandomGuy's Avatar
    SomeRandomGuy is offline Associate Member
    Join Date
    Apr 2010
    Posts
    443
    Quote Originally Posted by dec11 View Post
    can also pull the needle up a few mm, after injecting, and let it stay there for 30secs. inject holes heal over mega fast. this works for me
    This makes a lot of sense. I sometimes have blood squirt out, sometimes not, but I never see oil. If it's mixed in with the blood that would explain why I can't see it... If there's blood, does that necessarily mean that there's also oil coming out too? I will say using the pad doesn't work great. I will try this method of pulling halfway out, I'll bet that would work.

  21. #21
    VWbug66's Avatar
    VWbug66 is offline Senior Member
    Join Date
    Apr 2007
    Location
    texas
    Posts
    1,048
    just as hawaiin said...z track method!!! will not let any juice leak out!!!

  22. #22
    SuperBird's Avatar
    SuperBird is offline Associate Member
    Join Date
    Jun 2010
    Posts
    449
    HPride turned me on to this Ztrack thing. its the only way i pin now. but my girl friend is the only one that can Ztrack my glutes.

    my average pin is 23g - 1 1/2. my right leg is denser than my left. its hard to push a pin into my right leg, and i have to use my thumb palm to blow the juice in. my left leg is smooth sailing. I also take warfarin.... blood thinner because of a leg clot i had. but the warfarin only affects if i penetrate a major vein.

    regardless...... i always lose juice at the glutes and thighs mostly so i have to compress a very long time. not much from the delt. ive had strong geysers at my thigh, and juice loss 10 minutes after pinning in the glutes.

    i have to compress a very long time in these problem areas. and also sometimes i have to use superglue and lay down a drop to stop.

    everyone is different, different levels of plasma/red cell/white cell and clotting speed.

  23. #23
    SuperBird's Avatar
    SuperBird is offline Associate Member
    Join Date
    Jun 2010
    Posts
    449
    Quote Originally Posted by SomeRandomGuy View Post
    What about just pressing alcohol pad on injection site as soon as you pull the needle out?
    well also..... when surface plasma hits the air outside of the skin its like natural superglue and thats what stops the blood. if you douse it with alcohol you break down the surface plasma and eventually thats what needs to dry to stop the leak. so too much alcohol kills your clot effect.

    this was explained to me. im not a doctor, i only play one on tv.

  24. #24
    lovbyts's Avatar
    lovbyts is offline Knowledgeable Member
    Join Date
    Apr 2008
    Posts
    30,260
    Quote Originally Posted by Makiavelo76 View Post
    btw I used same 5cc syringes that I always use.
    You do mean the same type and not the SAME Syringe....

  25. #25
    tjax03's Avatar
    tjax03 is offline Associate Member
    Join Date
    Dec 2009
    Posts
    414
    Quote Originally Posted by SuperBird View Post
    well also..... when surface plasma hits the air outside of the skin its like natural superglue and thats what stops the blood. if you douse it with alcohol you break down the surface plasma and eventually thats what needs to dry to stop the leak. so too much alcohol kills your clot effect.

    this was explained to me. im not a doctor, i only play one on tv.
    What the hell is surface plasma? I have heard of blood plasma but not this.

  26. #26
    FuzzyPeaches o.O's Avatar
    FuzzyPeaches o.O is offline Senior Member
    Join Date
    Aug 2010
    Location
    if u ask u r fishing (%
    Posts
    1,220
    Quote Originally Posted by tjax03 View Post
    What the hell is surface plasma? I have heard of blood plasma but not this.
    The main factors when it comes to clotting in blood are platelets and plasma. Specifically the proteins in plasma which aid in the clotting process.

    In a nut shell a clot is simply platelets intertwined in fibrin molecules.

  27. #27
    tjax03's Avatar
    tjax03 is offline Associate Member
    Join Date
    Dec 2009
    Posts
    414
    Quote Originally Posted by FuzzyPeaches o.O View Post
    The main factors when it comes to clotting in blood are platelets and plasma. Specifically the proteins in plasma which aid in the clotting process.

    In a nut shell a clot is simply platelets intertwined in fibrin molecules.
    Yea I know about blood composition, but he used the words "surface plasma". I have never heard of that in my medical studies so I was wondering what he meant.

  28. #28
    FuzzyPeaches o.O's Avatar
    FuzzyPeaches o.O is offline Senior Member
    Join Date
    Aug 2010
    Location
    if u ask u r fishing (%
    Posts
    1,220
    I'm going to just guess he meant the blood plasma when it reaches air.

  29. #29
    SuperBird's Avatar
    SuperBird is offline Associate Member
    Join Date
    Jun 2010
    Posts
    449
    Quote Originally Posted by tjax03 View Post
    What the hell is surface plasma? I have heard of blood plasma but not this.
    what i mean to say, is that the plasma doesnt dry in the canal obviously, it dries when it hits the surface air. and that bonds at the piercing like a natural superglue.

    you know the way if a zit is popped, and then you have this clear microscab? and not a bloody clot? the plasma successfully dried at the surface before the blood had a chance to reach the surface and dry into the nastier red blood clot.

    thats what i mean to say. sorry i confused you like that.

  30. #30
    SuperBird's Avatar
    SuperBird is offline Associate Member
    Join Date
    Jun 2010
    Posts
    449
    Quote Originally Posted by tjax03 View Post
    Yea I know about blood composition, but he used the words "surface plasma". I have never heard of that in my medical studies so I was wondering what he meant.
    actually alot of our use of words comes from past experiences and we just relate them.

    i worked with a company 20 years ago that did well work. when well water reaches the surface, we no longer called it well water, we called it surface water. that was a different issue. once it crossed that line.

    i cant quote you word for word many of the things ive read, but i can generally convey the point understandably..... most of the time. unless someone wants to confront me with their medical prowess, in which case i will immediately submit for i am not doctor, but i do have a pretty good knowledge of why zits stop leaking, and why well water becomes surface water and what those differences are.

    so now when i read medical journals myself, it tends to get a bit of my own grammer and statement relativity.

    by the way, what is your medical studies? i think they would be helpful here

  31. #31
    SuperBird's Avatar
    SuperBird is offline Associate Member
    Join Date
    Jun 2010
    Posts
    449
    Quote Originally Posted by FuzzyPeaches o.O View Post
    I'm going to just guess he meant the blood plasma when it reaches air.
    Ahhh... One of the many guys here that understands the most poorly worded and terribly conveyed statements so freakishly easy !!

    i appreciate the credibility it gives me.


  32. #32
    Bonaparte's Avatar
    Bonaparte is offline AR-Hall of Famer
    Join Date
    Aug 2009
    Posts
    13,506
    Quote Originally Posted by Makiavelo76 View Post
    Is the second time I found a organge stain on my boxers after a Trenbolone injection in my butt. Is it possible that the tren liquid is coming out of the orifice after the injection?
    Anal leakage? Go get yourself some Depends

  33. #33
    boyka's Avatar
    boyka is offline Associate Member
    Join Date
    Jul 2010
    Posts
    195
    Tren coming out of my butt - hahahah what a title

  34. #34
    200gamblr is offline Junior Member
    Join Date
    Jul 2009
    Location
    Australia
    Posts
    97
    Follow HP's advice ans use the Z method. I've been pinning Tren A for the past 4 weeks with the same problem as you - read this posted day you put it up, saw HP's post, used ED since - no more problems

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •