Thread: Hgh waste
-
09-08-2009, 03:15 AM #1
Hgh waste
I inject 4iu ed using .5ml of backwater this morning after injecting i draw back the pin and the was .1 or just under water still in barrell so i checked 3 other pins that had been used and all had similar water in now over a week thats a waste of about 4iu.
my question is how do i stop the waste in the end of the pin so i dont waste any gh as over a period of 6 months id waste about 104iu now that sounds like ALOT!!
im sure alot of people would be interested in this thread as im sure im not the only one with this problem.
-
09-08-2009, 05:34 AM #2
Bump
-
09-08-2009, 05:43 AM #3
Leave a airbubble in the tube . When you inject let the air be the last to go through and this will get all the HGH out. Seems to be a common occurrence
-
09-08-2009, 09:26 AM #4
How do you get air bubble in tube ?
-
09-08-2009, 10:18 AM #5
After you draw your HGH and pull the needle out of the vial. Pull a small amount of air into the syringe.
-
09-08-2009, 10:24 AM #6
how do i get it then top the bottom of tube (sorry for the simple question)
-
09-08-2009, 11:03 AM #7Senior Member
- Join Date
- May 2006
- Location
- College Station
- Posts
- 1,676
turn it upside down
-
09-08-2009, 11:09 AM #8Senior Member
- Join Date
- May 2006
- Location
- College Station
- Posts
- 1,676
i just realized you have another new thread asking how to get air out of the syringe and now your asking how to get air into the syringe.
-
09-08-2009, 11:36 AM #9
chap was helping me with a thread i started about hgh waste he told me to put an air bubble in the bottom of it now i was not sure how to do this so he is helping me! so firstly this thread was not started how to get air into a syringe and 2nd i do not appreciate stupid remarks, if you have nothing interesting to say then dont say nothing at all!
these sites would be more friendly without people like you!!
(anything to get more posts under your belt well done friend!!!
-
09-08-2009, 11:45 AM #10
sorry about that little outburst chap now to get the bubble to the bottom i turn it upside down so does this mean i should do my injections will the pin slightly upside down too so to keep the bubble in bottom ?
-
09-08-2009, 01:06 PM #11
Rt you want that small bubble to push all the HGH through . I hope this was helpful
-
09-08-2009, 01:38 PM #12Banned
- Join Date
- Aug 2008
- Location
- Look up in the sky...
- Posts
- 3,265
-
09-08-2009, 04:06 PM #13Senior Member
- Join Date
- May 2006
- Location
- College Station
- Posts
- 1,676
dude if anybody is being a post whore here, it is you. i just counted 7 threads that you started on the 1st page. and most of them are over the the dumbest things. maybe you should think about things before making a post or use the search funtion.
here are your threads-
1.Hgh waste(getting air into a pin)
2.Getting air out needles
3.Injecting am or pm that is the question(any kind of an attempt of a search would have given you your answer)
4.Problem loading hgh(simple math and the ability to operate a slin pin could have taken care of this one)
5.Cycling hgh(another easy search)
6.Loading sterile water(another easy search)
7.HGH and the need for insulin (not a bad thread)
all im asking is just think for yourself a little bit. did you mother ever tell you think before you speak? same thing here except with starting threads. Im not trying to start something with you or raise my post count. BTW why would i care about my post count?
-
09-09-2009, 11:08 AM #14New Member
- Join Date
- Sep 2009
- Posts
- 1
hahah yeah those threads are useless
-
09-09-2009, 12:01 PM #15
-
09-09-2009, 12:10 PM #16
Peteroy im not much of a learner by reading i learn more by speaking and interacting i understand that these threads might be useless to people who have a world of knowledge but unforunatly im not one of those people im not getting at you either bro im just here to learn im sorry if i offended you rather then having a digg in a post tell me something interesting that i can take onboard in a positive way(sorry again if i offended you)
and thpun1sh3r these threads might be useless to you but its not to others who have less experence than yourself dude (its good to be nice!!!!)
-
09-09-2009, 01:30 PM #17Senior Member
- Join Date
- May 2006
- Location
- College Station
- Posts
- 1,676
It's cool man! Good luck. I just remembered, aren't u using detachable slin pins? If so I think that's what your problem is. I would think spending another $5 on quality pins would make up the cost in just a few iu's.
-
09-09-2009, 01:48 PM #18
i had fixed pins at first but i couldnt get all the water out the vial there was always a tiny bit left in the bottom also i now load up my pin with 1ml of bw i inject .5 one day then the next i change the pin head and inject the 2nd .5,so if i had fixed pin will the pin still be sterile 24hrs later to inject my second .5 of bw
-
09-09-2009, 02:01 PM #19Banned
- Join Date
- Jul 2008
- Location
- North Carolina
- Posts
- 1,672
-
09-09-2009, 08:16 PM #20Senior Member
- Join Date
- May 2006
- Location
- College Station
- Posts
- 1,676
I've had pins take longer than a wk to to get to me and had to use the same one for 3 days twice a day. I wouldn't recommend it but I've never had a problem. I'm currently using slin pins twice before I change out but I'm doing 4 shot a day so they usually aren't older than 12hr. I know you've had problems getting that last drop out so if I were u I would figure out how much that last drop is and add that much more BW when u reconstitute. I can't see u loosing more than a 1/10th of an iu buy doing this with the fixed slin pins.
-
09-09-2009, 08:37 PM #21
Disclaimer-BG is presenting fictitious opinions and does in no way encourage nor condone the use of any illegal substances.
The information discussed is strictly for entertainment purposes only.
Everything was impossible until somebody did it!
I've got 99 problems......but my squat/dead ain't one !!
It doesnt matter how good looking she is, some where, some one is tired of her shit.
Light travels faster then sound. This is why some people appear bright until you hear them speak.
Great place to start researching ! http://forums.steroid.com/anabolic-s...-database.html
-
09-10-2009, 05:05 AM #22
-
09-11-2009, 07:16 AM #23Banned
- Join Date
- Jul 2008
- Location
- North Carolina
- Posts
- 1,672
-
09-11-2009, 11:54 AM #24
-
09-11-2009, 12:28 PM #25Banned
- Join Date
- Jul 2008
- Location
- North Carolina
- Posts
- 1,672
-
09-11-2009, 01:12 PM #26
You just have to except some people's comments no matter how stupid they sound! Haha
-
09-14-2009, 12:49 AM #27Senior Member
- Join Date
- Mar 2009
- Posts
- 1,294
I use fixed slin pins for my HGH and never have any HGH left in the vial. I if I'm drawing out .5ml I put 1ml of air into the vial. I put 1ml of BW into the HGH vial so I draw .5ml twice. On the second time the is positive pressure in the vial. As I draw the HGH is slowly draw the pin out at the same time until HGH stops drawing. That means my pin is in the rubber and will not draw any more fluid. Then I slowly push the pin back into the vial until the fluid flows again. The positive pressure pushes the rest of the HGH out and i have nothing left in the vial. Works for me.
-
09-16-2009, 05:00 AM #28
-
09-21-2009, 07:15 PM #29Senior Member
- Join Date
- Mar 2009
- Posts
- 1,294
Assumption 10iu/vial.
Due to the crystallization process the HGH vial is normally in a vacuum.
1. Insert just the pin (the syringe is not attached to the pin) and let the vacuum filled vial normalize its pressure. The HGH "puck" might shift because of the rush of incoming air, don't be alarmed nothing has been damaged.
2. Load 1 ml of Bac Water in a 3ml (size doesn't matter 5ml, 10ml, etc) syringe.
3. Draw the syringe back to 2ml so there is 1ml of Bac Water and 1ml of air in the syringe.
4. Insert the syringe pin into the rubber stopper on the HGH vial and point the pin to the side of the vial. Push the pin in until it touches or is near the side of the vial. You don't want the Bac Water to shoot directly into the HGH. You want the water to slide down the side of the vial. Push the total contents of the syringe (1ml water + 1ml air) into the vial. Now you have 10iu/ml concentration HGH. Also, there is positive pressure in the HGH vial.
5. Let the vial sit until all the HGH has dissolved in the Bac Water. You can roll the vial on it's axis gently but DO NOT shake the vial.
6. Pull the insulin syringe (this is not the pin you just used to fill the vial with Bac Water) plunger back to 1ml (if you're loading .5ml in the syringe).
7. Insert the insulin pin into the vial right in the middle of the rubber stopper. The sides are thicker and the pin has to push through more rubber. It will dull the pin and could be uncomfortable when pinning. Push the 1ml of air into the vial. Now the vial (normally 3ml, will have a 2:1 pressure ratio) and will push the HGH out.
8. Slowly draw out .5ml (5iu) of HGH. I normally go past the 5 mark to say, 6 and push it back into the vial slowly to remove the air bubbles.
9. Prepare the second insulin pin with 1ml of air and push the 1ml of air into the vial.
10. Slowly draw the plunder back and begin to fill the syringe. At the same time slowly pull the pin out of the vial. When the HGH stops flowing into the syringe that means that the pin is now embedded in the rubber. You have pulled the pin out too much, this is good. Now slowly push the pin back into the rubber stopper until the HGH flows into the syringe again. Now the pin has penetrated into the vial a minute amount. Continue to pull on the plunger until the vial is empty.
This method will allow you to get the most HGH out of your vial. Good luck.Last edited by ScotchGuard; 09-21-2009 at 07:19 PM.
-
09-24-2009, 10:48 AM #30
Thanks scotchguard i will give this method a go
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
First Tren Cycle (blast)
01-06-2025, 11:29 AM in ANABOLIC STEROIDS - QUESTIONS & ANSWERS